Category: chlorides-buliding-blocks

Electric Literature of 4584-46-7, The chemical industry reduces the impact on the environment during synthesis 4584-46-7, name is 2-Chloro-N,N-dimethylethanamine hydrochloride, I believe this compound will play a more active role in future production and life.

Solution of 2-(dimethylamino)ethyl chloride in heptane. To 2-(dimethylamino)ethyl chloride hydrochloride (10 g, 100 mmol) was added water (12 mL) and heptane (10 g). The mixture was stirred, and the pH of the aqueous phase was cautiously adjusted to pH 10 using a concentrated solution of sodium hydroxide, and the mixture was stirred for 45 min. The organic phase was separated, and the aqueous phase was extracted with further heptane (2.5 g). The combined organic phases were washed with water (5 mL) and then dried over anhydrous potassium carbonate for 15 min before filtering. This solution was used directly in the following step. Analysis by MR indicated that the concentration of 2- (dimethylamino)ethyl chloride was approximately 25 % w/w in heptane.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-Chloro-N,N-dimethylethanamine hydrochloride, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; H. LUNDBECK A/S; BØGESØ, Klaus, Peter; JUHL, Karsten; ZHONG, Huailing; LØLAND, Claus, Juul; WO2013/110313; (2013); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

1996-29-8, These common heterocyclic compound, 1996-29-8, name is 1-Bromo-4-chloro-2-fluorobenzene, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Reference Example-10 A solution of 1-bromo-4-chloro-2-fluoro benzene (10.0 g, 47.8 mmol) in THF was added dropwise to a suspension of magnesium (1.28 g, 52.5 mmol) in THF (50 mL) at 40 C. (oil bath temperature) in the presence of a catalytic amount of iodine in an argon gas atmosphere, whereby a Grignard reagent was prepared. The Grignard reagent was added dropwise to a solution of diethyl oxalate (8.37 g, 57.3 mmol) in THF at -50 C., and the temperature was slowly raised to room temperature, followed by stirring for 18 hours. After the reaction was completed, the reaction solution was poured into ice, then, acidified with concentrated hydrochloric acid, and the resultant product was extracted with ether (100 mL*2, 50 mL*1). The organic layer was dried over anhydrous magnesium sulfate, and concentrated under reduced pressure, whereby an orange oily crude product (12.9 g) was obtained. This was purified by silica gel column chromatography (hexane:ethyl acetate=10:1), whereby ethyl 2-(4-chloro-2-fluorophenyl)-2-oxoacetate (4.17 g, yield: 41%) was obtained as a yellow oily material. 1H-NMR (400 MHz, CDCl3): delta1.40 (t, J=7.1 Hz, 3H), 4.43 (q, J=7.1 Hz, 2H), 7.22 (dd, J=1.8 and 10.2 Hz, 1H), 7.31 (dd, J=1.8 and 8.4 Hz, 1H), 7.89 (dd, J=7.6 and 8.4 Hz, 1H). 19F-NMR (376 MHz, CDCl3): delta-109 (s, 1F).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 1996-29-8.

Reference:
Patent; KAKEN PHARMACEUTICAL CO., LTD.; SAGAMI CHEMICAL RESEARCH INSTITUTE; KOBAYASHI, Osamu; NIIKURA, Naoko; INOUE, Tomoko; MIZUTA, Satoshi; TAKATSUNA, Reiko; HIRAI, Kenji; SHIROUZU, Kentaro; OBATA, Miyoo; (183 pag.)US2016/24110; (2016); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 20850-43-5 as follows. Recommanded Product: 20850-43-5

General procedure: Suspension of the appropriate 3-amino-1,1-dioxo-1,4,2-benzodithiazine derivative 4a-h (0.5 mmol), anhydrous K2CO3 (1.5 mmol, 0.21 g) and the appropriate alkyl chloride (0.6 mmol) in dry THF (5 ml) was heated at reflux for 20-24 h, then cooled in ice-bath and filtered off. The crude product was suspended in 5 ml of water, heated gently to ca. 50 C; and cooled with vigorous stirring until granular precipitate appeared. Filtering off and washing with cold water and diluted EtOH gave pure potassium salts. 4.5.11 ;N-{2-[(1,3-Benzodioxol-5-yl)methylthio]-4-chloro-5-(3-phenyl-1,2,4-oxadiazol-5-yl)benzenesulfonyl}cyanamide potassium salt (5o) ;Starting from 4g (0.196 g) and 1,3-benzodioxol-5-ylmethyl chloride (0.102 g). Yield: 0.215 g (88%): m.p. 274-276 C; IR (KBr): nu 2923, 2179, 1625, 1585, 1560, 1500, 1488, 1362, 1349, 1253, 1226, 1143 cm-1; 1H NMR (500 MHz, DMSO-d6): delta 4.38 (s, 2H, SCH2), 6,01 (s, 2H, OCH2O), 6.90 (d, J = 7.81 Hz, 1H, Ar), 6.98 (d, J = 7.81 Hz, 1H, Ar), 7.05 (s, 1H, Ar), 7.59-7.63 (m, 3H, Ar), 7.70 (s, 1H, Ar), 8.10-8.11 (m, 2H, Ar), 8.59 (s, 1H, Ar); Anal. C23H14ClKN4O5S2 (C, H, N).

According to the analysis of related databases, 20850-43-5, the application of this compound in the production field has become more and more popular.

Reference:
Article; Brozewicz, Kamil; Slawinski, Jaroslaw; European Journal of Medicinal Chemistry; vol. 55; (2012); p. 384 – 394;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Related Products of 2106-02-7, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 2106-02-7, name is 2-Chloro-4-fluoroaniline belongs to chlorides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

a 2-Chloro-4-fluorophenylisothiocyanate Into a solution of 2-chloro-4-fluoroaniline (500 mg, 3.44 mmol) in a mixture of chloroform and water (10 mL/10 mL) at room temperature, thiophosgene (0.53 mL, 6.88 mmol) and sodium bicarbonate (1.09 g, 10.32 mmol) were added. The mixture was stirred at room temperature for 16 hours. The mixture was partitioned between chloroform and water. The combined organic layer was then concentrated to give the desired product (586 mg, 91%). 1H NMR (CDCl3) delta 6.98 (m, 1H), 7.20 (m, 2H).

The synthetic route of 2-Chloro-4-fluoroaniline has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Palovich, Michael R.; Widdowson, Katherine L.; Nie, Hong; US2003/216375; (2003); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 1939-99-7 as follows. HPLC of Formula: C7H7ClO2S

A stirred solution of ethyl(3-amino-2-oxo-1,2-dihydropyridyl)acetate (40.0 g, 0.204 mole) and 2,4,6-collidine (54 ML, 0.408 mole) in tetrahydrofuran (200 ML) was cooled in an ice bath.. A solution of benzylsulfonyl chloride (38.9 g, 0.204 mmole) in tetrahydrofuran (200 ML) was added over a 50-minute period.. After addition was complete, the solution was stirred for 30 minutes at 0 C. The reaction mixture was diluted with ethyl acetate (1.2 L), washed with 1.0N HCl (until aqueous layer is PH 1), water (50 ML), saturated sodium bicarbonate (100 ML), and brine (2*50 ML).. The organic layer was dried over anhydrous magnesium sulfate, and the solvent was removed.. The residue was recrystallized from chloroform. 39 g of the title compound was isolated.. To the mother liquor was added silica gel.. The solution was swirled, then filtered through a sintered glass funnel, washing with 50% ethyl acetate in dichloromethane.. The solvent was removed from the filtrate, and the residue was recrystallized from chloroform.. An additional 13 g of the title compound was isolated to afford a total of 52.00 g (75% yield) of the title compound as a tan solid. Rf=0.32 (silica gel, 20% ethyl acetate in dichloromethane); m.p. 48-49 C.

According to the analysis of related databases, 1939-99-7, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Corvas International, Inc.; US6342504; (2002); B1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 118-69-4, name is 2,6-Dichlorotoluene, belongs to chlorides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 118-69-4, SDS of cas: 118-69-4

Example 1 3-Chloro-2-methylphenol Process Variant a1 16.1 g (0.1 mol) of 2,6-dichlorotoluene and 19.8 g (0.3 mol) of potassium hydroxide (85%) are heated in 30 ml of diethylene glycol at a bath temperature of 190 C. for 18 hours. The water released by the reaction is distilled off. After cooling, the reaction mixture is stirred with 100 ml of water until a solution is obtained and extracted three times with 50 ml of dichloromethane. The aqueous phase is admixed with 35 ml of 30% hydrochloric acid and extracted three times with 70 ml of dichloromethane. The organic phases are dried over sodium sulphate and concentrated under reduced pressure. 3-Chloro-2-methylphenol is obtained as a solid (12.4 g, content by HPLC: 83%, 72% of theory). NMR (d6-DMSO): 6.75 (d, 1H, aromatic), 6.85 (d, 1H, aromatic) 7.0 (t, 1H, aromatic), 9.8 (s, 1H, phenolic OH)

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 2,6-Dichlorotoluene, and friends who are interested can also refer to it.

Reference:
Patent; Huebsch, Walter; Lantzsch, Reinhard; Mueh, Thorsten; Weintritt, Holger; US2003/92944; (2003); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Reference of 60811-18-9,Some common heterocyclic compound, 60811-18-9, name is 4-Bromo-1-chloro-2-fluorobenzene, molecular formula is C6H3BrClF, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

a. 4-chloro-3-fluorobenzoylpropionic acid To a solution of succinic anhydride (6.0 g) in tetrahydrofuran (60 ml) was added dropwise the Grignard prepared from 1.5 g (0.062 mole) of magnesium turnings and 10.5 g (0.05 mole) of 1-bromo-4-chloro-3-fluorobenzene using the procedure of part a. When the addition was completed, the resulting suspension was stirred for 2 hours at 45 C. after which water (100 ml) was added slowly and the resulting mixture was acidified with concentrated hydrochloric acid to pH=1. The ether layer was separated and extracted with 5% aqueous sodium hydroxide (3*100 ml). The combined aqueous solutions were washed with ether (1*100 ml). The combined basic aqueous layers were acidified with concentrated hydrochloric acid to pH 1 and extracted with ethyl acetate (3*150 ml). The combined organic extracts were washed with water (1*150 ml) and brine (1*150 ml), dried over anhydrous magnesium sulfate and evaporated in vacuo to give 7.1 g (62%) of the product as a yellow orange solid. The resulting acid was converted to the desired product using the procedure of Example 11d-e. Compound 83 was prepared following essentially the same procedure.

The synthetic route of 60811-18-9 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Rohm and Haas Company; US5552409; (1996); A;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 3972-56-3, name is 1-tert-Butyl-4-chlorobenzene, This compound has unique chemical properties. The synthetic route is as follows., Computed Properties of C10H13Cl

20 parts of water,40 parts of acetone,And 20 parts of potassium carbonate were mixed,Three parts of raw material A are added. After stirring for 1 hour,10 parts of raw material B was charged, the temperature was raised to 50 ° C. while stirring,Stir for an additional 1 hour. after that,Concentrate using a rotary evaporator,And dried to obtain a dispersant.N – (4 – aminophenyl) acetamide was used as the raw material A of the dispersant preparation example,Using 1-tert-butyl-4-chlorobenzene as the raw material B,Dispersant 1 was obtained.

According to the analysis of related databases, 3972-56-3, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Dispersed materials Institute; Umemura, Kazuyuki; Ito, Shiho; Suzuki, Junji; Nishida, Atsushi; (15 pag.)JP2016/108519; (2016); A;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Related Products of 93765-83-4, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 93765-83-4, name is 1-Bromo-5-chloro-2-fluoro-4-methylbenzene belongs to chlorides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

Preparation 12To a solution of 1-bromo-5-chloro-2-fluoro-4-methylbenzene (Comm, 10 g, 44.7 mmol) in methanol (200 ml_) was added 1 ,1′-binaphthalene-2,2′-diylbis(diphenylphosphine) – dichloropalladium (1:1) (358 mg, 0.447 mmol) and N,N-diethylethanamine (8.11 ml_, 58.2 mmol). The resulting mixture was placed in a bomb and pressurized with carbon monoxide to 80 psi and heated at 80C for 18 hours. The reaction mixture was then concentrated in vacuo to yield a semi-solid, which was dissolved in EtOAc (300 ml_) and washed with water (200 mL). The organic layer was separated, dried over magnesium sulphate, filtered and concentrated in vacuo to yield an orange oil, which solidified on standing (9.87 g). The solid was purified by silica gel chromatography eluting with 0 to 20% EtOAc in heptane to afford the title compound as a crystalline white solid (8.47 g, 93%).1H NMR (400 MHz, CDCI3): delta 2.40 (s, 3H), 3.92 (s, 3H), 7.03 (d, 1 H), 7.91 (d, 1 H) LCMS Rt = 1 .64 minutes Molecular ion not observed

The synthetic route of 1-Bromo-5-chloro-2-fluoro-4-methylbenzene has been constantly updated, and we look forward to future research findings.

Reference:
Patent; PFIZER LIMITED; BROWN, Alan, Daniel; RAWSON, David, James; STORER, Robert, Ian; SWAIN, Nigel, Alan; WO2012/7868; (2012); A2;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics