Category: chlorides-buliding-blocks

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 26487-67-2, name is 1-(2-Chloroethyl)azepane hydrochloride belongs to chlorides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below. Recommanded Product: 1-(2-Chloroethyl)azepane hydrochloride

Example 2: Synthesis of 2-((2-(azepan-1-yl)ethoxy)methyl)pyrazolo[1 ,5-a]pyridine maleate 0.12 g (3 mmol) of a 60percent NaH suspension in mineral oil were added under nitrogen to a solution of pyrazolo[1 ,5-a]pyridin-2-ylmethanol (100 mg, 0.67 mmol) in 5 mL of dry THF. The mixture was stirred for 5 h at room temperature, and after this time, was added 1 -(2-chloroethyl)azepane hydrochloride (201 mg, 1 .01 mmol) suspended in 8 ml_ of THF with 200muIota of triethylamine (TEA). The mixture was heated at 55 5C for 18 h, allowed to cool to room temperature, quenched with water and extracted with EtOAc, and washed with water. The organic layers were dried over Na2S04 and concentrated under vacuum to afford 0.22 g (65percent) of brown oil. Maleate salt was obtained following the same procedure as for example 1 . 1 H NMR (CDCI3) delta ppm: 8.42 (d, J = 6.8 Hz, 1 H), 7.52 (d, J = 8.8 Hz, 1 H), 7.20 – 7.06 (m, 1 H), 6.78 (t, J = 6.9 Hz, 1 H), 6.49 (s, 1 H), 6.30 (s, 2H), 4.74 (s, 2H), 4.08 – 3.89 (m, 2H), 3.70 – 3.51 (m, 2H), 3.36 – 3.25 (m, 2H), 3.19 – 2.99 (m, 2H), 2.15 – 1 .92 (m, 2H), 1 .92 – 1 .72 (m, 4H), 1 .72 – 1 .54 (m, 2H).

The synthetic route of 26487-67-2 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; LABORATORIOS DEL DR. ESTEVE S.A.; DIAZ FERNANDEZ, Jose Luis; CUBERES ALTISENT, Mª Rosa; WO2013/124341; (2013); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Adding some certain compound to certain chemical reactions, such as: 15205-15-9, name is 2-Chloro-6-fluorobenzylamine, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 15205-15-9. 15205-15-9

Step 7: (S) -tert-Butyl (1- (4- ( (2-chloro-6-fluorobenzyl) carbamoyl) -2- (3- (cyclopropylmethoxy) -4- (difluoromethoxy) phenyl) oxazol-5-yl) ethyl) carbamate[0525]To 10 mL of dichloromethane were added (S) -5- (1- ( (tert-butoxycarbonyl) amino) ethyl) -2- (3- (cyclopropylmethoxy) -4- (difluoromethoxy) phenyl) oxazole-4-carboxylic acid (0.3 g, 0.64 mmol) , 1- (3-dimethylaminopropyl) -3-ethylcarbodiimide hydrochloride (183.36 mg, 0.96 mmol) and 1-hydroxy-7-azabenzotriazole (130.56 mg, 0.96 mmol) . To the resulting solution were added (2-chloro-6-fluorophenyl) methanamine (0.1 mL, 0.77 mmol) and N, N-diisopropylethylamine (0.33 mL, 1.92 mmol) , and the mixture was stirred at rt for 22 hours. The reaction mixture was washed with water (20 mL × 3) . The organic layer was dried over anhydrous sodium sulfate. The organic solvent was removed and the residue was purified by silica gel column chromatography (PE/EtOAc (v/v) 5/1) to give the title compound as a white solid (264 mg, 67) .[0526]1H NMR (400 MHz, CDCl3) : delta ppm 7.59 (dd, J1 8.3 Hz, J2 1.9 Hz, 1H) , 7.54 (d, J 1.8 Hz, 1H) , 7.47 -7.45 (m, 1H) , 7.27 (d, J 4.6 Hz, 1H) , 7.24 (d, J 8.4 Hz, 1H) , 7.10 -7.06 (m, 1H) , 6.71 (t, JF-H 75.0 Hz, 1H) , 5.32 -5.25 (m, 1H) , 4.87 -4.84 (m, 2H) , 3.98 (d, J 6.9 Hz, 2H) , 1.56 (d, J 7.0 Hz, 3H) , 1.45 -1.43 (m, 9H) , 1.38 -1.34 (m, 1H) , 0.73 -0.68 (m, 2H) , 0.44 -0.40 (m, 2H) .

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 2-Chloro-6-fluorobenzylamine.

Reference:
Patent; SUNSHINE LAKE PHARMA CO., LTD.; LIU, Bing; YU, Tianzhu; ZHANG, Yingjun; ZHANG, Xiangyu; ZHANG, Shiguo; CHENG, Changchung; ZHANG, Jiancun; WO2015/161830; (2015); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Some common heterocyclic compound, 26487-67-2, name is 1-(2-Chloroethyl)azepane hydrochloride, molecular formula is C8H17Cl2N, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. HPLC of Formula: C8H17Cl2N

Compound 4 (200mg, 0.75mmol) refluxed with K2CO3 (259.42mg, 1.87mmol), 1-(2-Chloro-ethyl)-azepane hydrochloride (148.58mg, 0.75mmol) in acetone furnished 7 (220mg, 75percent) as brown viscous oil. 1H NMR (300MHz, CDCl3): delta 7.21?7.06 (m, 8H), 6.91?6.78 (m, 3H), 6.64?6.63 (m, 1H), 5.59 (s, 1H), 4.07 (t, J=6.0, 2H), 2.97 (t, J=6.1, 2H), 2.81 (t, J=5.6, 4H), 1.69?1.61 (m, 8H); 13C NMR (CDCl3, 50MHz): delta 157.5, 148.4, 144.1, 136.2, 129.8 (2C), 128.7 (2C), 128.4 (2C), 126.6, 126.5, 126.2, 124.4, 114.4 (2C), 65.7, 57.8, 54.9 (2C), 51.3, 25.7 (3C), 24.1; IR (Neat): 3019, 2938, 2362, 1610, 1509, 1218, 763cm?1; MS (ESI): m/z 392 (M+H)+; Anal. Calcd for C25H29NOS: C, 76.68; H, 7.46; N, 3.58. Found: C, 76.72; H, 7.39; N, 3.61.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 26487-67-2, its application will become more common.

Reference:
Article; Singh, Priyanka; Manna, Sudipta Kumar; Jana, Amit Kumar; Saha, Tiash; Mishra, Pankaj; Bera, Saurav; Parai, Maloy Kumar; Srinivas Lavanya Kumar; Mondal, Sankalan; Trivedi, Priyanka; Chaturvedi, Vinita; Singh, Shyam; Sinha, Sudhir; Panda, Gautam; European Journal of Medicinal Chemistry; vol. 95; (2015); p. 357 – 368;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Related Products of 39065-95-7,Some common heterocyclic compound, 39065-95-7, name is 4-(Chlorodifluoromethoxy)aniline, molecular formula is C7H6ClF2NO, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A stirred solution of 6-hydroxy-5-iodonicotinic acid (40 g) and DMF (3.51 mL) in toluene (315 mL) was treated dropwise with SOd2 (43.9 mL) at RT and then stirred at 85C for 2.5 h. The solvent was evaporated off under reduced pressure and the residue was redissolved in DCM (315 mL). The solution was cooled in an icy water bath and to this solution a mixture of 4-(chlorodifluoromethoxy)aniline (26 .3 g) and Et3N (63 mL) in DCM (315 mL) was added dropwise. The mixture was stirred at rt for 1 hr. Then a saturated aqueous solution of NaHCO3 was added and the mixture was stirred at rt for 10 mm and a solid was formed. The mixture was then diluted with 315 mL of hexane and filtered to collect the white solid, washed with more water and air dried to afford 6-chloro-N-(4-(chlorodifluoromethoxy)phenyl)-5-iodonicotinamide (55.97 g). (Rt = 2.28 mi +ESI m/z: MH+ = 459.0).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 4-(Chlorodifluoromethoxy)aniline, its application will become more common.

Reference:
Patent; ASTAR BIOTECH LLC; LI, Lianhai; YU, Chunrong; HUANG, Haihong; (94 pag.)WO2017/186148; (2017); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 14495-51-3, name is 2-Bromo-5-chlorotoluene, belongs to chlorides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 14495-51-3, Recommanded Product: 2-Bromo-5-chlorotoluene

13.3 ml (0.1 mol) of 2-bromo-5-chlorotoluene was dissolved in 200 ml of anhydrous THF, and 27.7 ml (0.12 mol) of triisopropyl borate was added thereto. After cooling the reaction mixture to-78C over a dry ice-acetone bath, 48 ml (0.12 mol) of 2.5 M n-BuLi (in hexane) was added dropwise thereto for 1 hour, the dry ice-acetone bath was removed, and 150 ml of 3 N HCI was added thereto. The resulting mixture was stirred for 1 hour, and the separated water layer was extracted twice with 100 ml portions of ethyl acetate. The organic layers were combined, washed with a brine solution, dried over anhydrous MgS04, and filtered under a reduced pressure to remove the solvent. The residue was recrystallized from 10% ethyacetate/hexane to obtain 13.8 g (yield 81%) of 4-chloro-2-methylboronic acid as a white solid. ¹H NMR (300 MHz, CDCh) d 8.07 (dd, 1H, J= 5.7 Hz, 2.8 Hz), 7.28-7.26 (m, 2H), 2.76 (s, 3H)

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; KOREA RESEARCH INSTITUTE OF CHEMICAL TECHNOLOGY; OSCOTEC INC.; WO2005/123054; (2005); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Related Products of 93-50-5,Some common heterocyclic compound, 93-50-5, name is 4-Chloro-2-methoxyaniline, molecular formula is C7H8ClNO, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A solution of 4-chloro-2-methoxyaniline (4.93 g, 31.3 mmol) in THF (70 ml) was treated with BOC-anhydride (11.00 ml, 47.4 mmol) and heated at 70 overnight. LCMS showed that most of starting materials were converted to product. The solution was treated with silica gel and evaporated under reduced pressure. The material was divided into two batches, each of which was chromatographed by Biotage MPLC (50 g silica gel column, 0 to 1% EtOAc in hexanes). Like fractions from the two columns were combined and evaporated under reduced pressure to provide a clear colorless liquid. Heptane (-80 mL) was added, then evaporated under reduced pressure to provide a clear, very viscous liquid. LCMS and NMR are consistent with tert-butyl 4-chloro-2-methoxyphenylcarbamate (7.66 g, 29.7 mmol, 95 % yield). 1H NMR (300 MHz, CHLOROFORM-d): delta ppm 8.08-7.96 (m, 1 H), 7.01 (br s, 1 H), 6.92 (dd, J=8.65, 2.20 Hz, 1 H), 6.83 (d, J=2.34 Hz, 1 H), 3.87 (s, 3 H), 1.53 (s, 9 H). LCMS: m/z 202 (loss of t-Bu).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 4-Chloro-2-methoxyaniline, its application will become more common.

Reference:
Patent; FORMA THERAPEUTICS, INC.; ASHWELL, Susan; CAMPBELL, Ann-Marie; CARAVELLA, Justin Andrew; DIEBOLD, R. Bruce; ERICSSON, Anna; GUSTAFSON, Gary; LANCIA, David R.; LIN, Jian; LU, Wei; WANG, Zhongguo; (141 pag.)WO2016/44782; (2016); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 344-19-4, name is 2,6-Dichloro-4-fluoroaniline, This compound has unique chemical properties. The synthetic route is as follows., SDS of cas: 344-19-4

Step 1: (2,6-dichloro-4-fluorophenyl)hydrazine hydrochloride To a – 5 C solution (internal temperature, wet ice/acetone bath) of 2,6-dichloro-4-fluoroaniline (3.0 g, 17 mmol) in 37 % hydrochloric acid (30 mL) and trifluoroacetic acid (20 mL) was added dropwise an aqueous solution of sodium nitrite (1.4 g, 20 mmol, 6 mL water). The reaction was stirred for 90 minutes, then a solution of stannous chloride dihydrate (5.6 g, 25 mmol) in 37 % hydrochloric acid (16 mL) was added over 15 minutes, keeping the internal temperature ? 2 C. The mixture was stirred overnight at room temperature. The mixture was filtered and the collected solid was washed with isopropyl alcohol and dried under house vacuum to provide the title compound. LCMS-ESI+ (m/z): [M+H]+ calcd for C6H6Cl2FN2: 195.0; found: 194.9.

According to the analysis of related databases, 344-19-4, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Gilead Sciences, Inc.; BLOMGREN, Peter A; CURRIE, Kevin S; GEGE, Christian; KROPF, Jeffrey E; XU, Jianjun; (60 pag.)EP3257847; (2017); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Reference of 1127-85-1, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 1127-85-1, name is 2,4-Dichloro-5,6,7,8-tetrahydroquinazoline belongs to chlorides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

General procedure: To a solution of 2,4-dichloro-5-fluoroquinazoline (22a) (100.00mg, 460.77 mumol, 1.00 eq) in THF (3.00mL) was added methyl (2S,3S)-3-aminobicyclo[2.2.2]octane-2-carboxylate (84.44mg, 460.77 mumol, 1.00 eq) and DIPEA (238.20mg, 1.84mmol, 4.00 eq) at room temperature overnight. H2O (20mL) was added to the mixture and extracted with EtOAc (10mL×3). The combined organic layers were dried over Na2SO4 and concentrated in vacuum. The residue was purified by column chromatography on silica gel with PE:EtOAc (10:1 to 5:1) to give compound 23a (130.00mg, 357.33 mumol, 77.55% yield) as a yellow solid.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2,4-Dichloro-5,6,7,8-tetrahydroquinazoline, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Xiong, Jian; Wang, Jingjing; Hu, Guoping; Zhao, Weili; Li, Jianqi; European Journal of Medicinal Chemistry; vol. 162; (2019); p. 249 – 265;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Reference of 7781-10-4, These common heterocyclic compound, 7781-10-4, name is 4-Chloro-7-methyl-7H-pyrrolo[2,3-d]pyrimidine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a mixture of (S)-tert-butyl 2-amino-4-(((S)-2-fluoro-3-methoxypropyl) (4-(5,6,7,8-tetrahydro-1,8-naphthyridin-2-yl) butyl)amino) butanoate (150 mg, 331 mumol), 4-chloro-7-methyl-7H-pyrrolo[2,3-d]pyrimidine (48 mg, 286) in t-AmOH (3 mL) was added 2.0M t-BuONa in THF (286 muL, 572 mumol) then t-BuXPhos-Pd-G3 (23 mg, 29 mumol) and the resulting mixture was heated to 100 C. for 15 h, cooled to rt, and then concentrated in vacuo to give a tert-butyl (S)-4-(((S)-2-fluoro-3-methoxypropyl) (4-(5,6,7,8-tetrahydro-1,8-naphthyridin-2-yl) butyl)amino)-2-((7-methyl-7H-pyrrolo[2,3-d]pyrimidin-4-yl) amino) butanoate intermediate, LCMS (ESI+): m/z=584.4 (M+H)+, which was used without further purification. Of the butanoate intermediate, 80 mg, 141 mumol) was taken up in DCM (1 mL) and TFA (400 juL) and the resulting mixture was stirred at rt for 6 h and then concentrated in vacuo. The crude residue was purified by reverse phase prep-HPLC to give the title compound. LCMS (ESI+): m/z=528.3 (M+H)+.

Statistics shows that 4-Chloro-7-methyl-7H-pyrrolo[2,3-d]pyrimidine is playing an increasingly important role. we look forward to future research findings about 7781-10-4.

Reference:
Patent; Pliant Therapeutics, Inc.; CHA, Jacob; DONG, Chengguo; HOM, Timothy; JIANG, Lan; LEFTHERIS, Katerina; LI, Hui; MORGANS, JR., David J.; MUNOZ, Manuel; REILLY, Maureen; ZHENG, Yajun; (232 pag.)US2019/276449; (2019); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 155535-20-9, name is 2-Chloro-5,6,7,8-tetrahydroquinoxaline, This compound has unique chemical properties. The synthetic route is as follows., SDS of cas: 155535-20-9

b) A mixture of intermediate (3), 1-bromo-2,5-pyrolidinedione (0.116 mol) and dibenzoyl peroxide (1.3g) in tetrachloromethane (400ml) was stirred and refluxed for 35 minutes, brought to room temperature and then filtered. The reaction was carried out again using the same quantities. The residues were combined. The solvent was evaporated. The residue (60g) was purified by column chromatography over silica gel (eluent: cyclohexane/EtOAc 85/5; 15-35 mum). Two pure fractions were collected and their solvents were evaporated, yielding 25 g (43%) of (+/-)-5-bromo-2-chloro-5,6,7,8-tetrahydroquinoxaline (interm. 4) and 12 g (21 %) of (+/-)-8-bromo-2-chloro-5,6,7,8-tetrahydroquinoxaline.

According to the analysis of related databases, 155535-20-9, the application of this compound in the production field has become more and more popular.

Reference:
Patent; JANSSEN PHARMACEUTICA N.V.; EP1196410; (2004); B1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics