Tag: M.W=200-300

Related Products of 1127-85-1, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 1127-85-1, name is 2,4-Dichloro-5,6,7,8-tetrahydroquinazoline belongs to chlorides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

General procedure: To a solution of 2,4-dichloro-5-fluoroquinazoline (22a) (100.00mg, 460.77 mumol, 1.00 eq) in THF (3.00mL) was added methyl (2S,3S)-3-aminobicyclo[2.2.2]octane-2-carboxylate (84.44mg, 460.77 mumol, 1.00 eq) and DIPEA (238.20mg, 1.84mmol, 4.00 eq) at room temperature overnight. H2O (20mL) was added to the mixture and extracted with EtOAc (10mL×3). The combined organic layers were dried over Na2SO4 and concentrated in vacuum. The residue was purified by column chromatography on silica gel with PE:EtOAc (10:1 to 5:1) to give compound 23a (130.00mg, 357.33 mumol, 77.55% yield) as a yellow solid.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2,4-Dichloro-5,6,7,8-tetrahydroquinazoline, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Xiong, Jian; Wang, Jingjing; Hu, Guoping; Zhao, Weili; Li, Jianqi; European Journal of Medicinal Chemistry; vol. 162; (2019); p. 249 – 265;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Synthetic Route of 3460-24-0, These common heterocyclic compound, 3460-24-0, name is 1,4-Dibromo-2-chlorobenzene, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

1,4-Dibromo-2-Chloro-Benzene 1eq(45.8 g), 2-aminophenylboronic acid 2eq (46.5 g), Pd (PPh3) 4 5 mol% (9.8 g) and K2CO3 2eq (46.9 g) were dissolved in toluene 1-fold, 550 ml) and distilled water (5 times as much as K2CO3, 235 ml), and the mixture was stirred under reflux for 18 hours under a nitrogen stream. After completion of the reaction, the reaction mixture was extracted with toluene and distilled water. The organic layer was dried with magnesium sulfate (MgSO4) and filtered, and the filtrate was concentrated under reduced pressure. The organic solution was removed, and the residue was subjected to silica gel column chromatography with hexane: dichloromethane = 7: 3 (v / v), and the resulting solid was recrystallized from dichloromethane and acetone to obtain intermediate d-1 (23.5 g, Y = 47%).

The synthetic route of 3460-24-0 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Samsung SDI Co., Ltd; Jang Gi-po; Kim Jun-seok; Lee Seung-jae; Hong Jin-seok; Kim Chang-u; Jeong Seong-hyeon; Kim Yeong-gwon; Ryu Eun-seon; Jeong Ho-guk; (30 pag.)KR2017/111538; (2017); A;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 1205-71-6, name is 4-Chloro-N-phenylaniline, belongs to chlorides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 1205-71-6, Recommanded Product: 1205-71-6

General procedure: To a 50 mL of two-neck round-bottomed flask charged with a magnetic stirrer bar, were successively added 1-Bromo(2-diphenylphosphoryl)ethyne (1) (305 mg, 1.0 mmol), diphenylamine(203 mg, 1.2 mmol, 1.2 equiv), K3PO4 (637 mg, 3.0 mmol, 3.0 equiv) and dehydrated toluene (5mL). After the mixture was stirred at 80 C for 15 h, the reaction mixture was quenched with 1 mL of saturated NH4Cl aq., and extracted with ethyl acetate and H2O, and dried over brine and MgSO4. The crude product was purified by flash chromatography (hexane/EtOAc, 1:2) to afford the corresponding phosphoryl ynamine 2a (240 mg) in 61% yield.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Article; Okuda, Yasuhiro; Seo, Tomoyo; Shigezane, Yuki; Watanabe, Hikaru; Akashi, Haruo; Iwanaga, Tetsuo; Orita, Akihiro; Chemistry Letters; vol. 48; 12; (2019); p. 1484 – 1487;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Electric Literature of 38762-41-3, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 38762-41-3 as follows.

To a solution of 4-bromo-2-chloro-phenylamine (32 g, 0.15 mol) and pyridine (13.45 g, 0.17 mol) in DCM (200 mL) was added 3-chloropropionyl chloride (21.65 g, 0.17 mol) dropwise at 15 C. After stirring at room temperature for 1 hour, the mixture was washed with water and then aqueous 2N HC1. The organic layer was dried over anhy. Na2S04, filtered, and concentrated in vacuo to afford title compound (10.9 g, 90%) as a white solid.

According to the analysis of related databases, 38762-41-3, the application of this compound in the production field has become more and more popular.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; AEBI, Johannes; AMREIN, Kurt; HORNSPERGER, Benoit; KUHN, Bernd; MAERKI, Hans P.; MARTIN, Rainer E.; MAYWEG, Alexander V.; TAN, Xuefei; (77 pag.)WO2016/66597; (2016); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Application of 13745-86-3,Some common heterocyclic compound, 13745-86-3, name is 11-Chlorodibenzo[b,f][1,4]thiazepine, molecular formula is C13H8ClNS, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

(b) 11-Piperazinyl-dibenzo[b,f][1,4]thiazepine. Piperazine (1.7 mole) was dissolved in warm toluene (about 50C) (750 ml) and 11-chloro-dibenzo[b,f][1,4]thiazepine added. The reaction was heated to reflux and maintained at this temperature for 5 hr. After cooling to ambient temperature the reaction was filtered to remove piperazine hydrochloride, the organic phase was washed several times with water to remove excess piperazine. The organic phase was dried over magnesium sulphate and after filtration the solvent was removed in vacuo to give the product as an oil. The oil was dissolved in ethanol and treated with a solution of hydrogen chloride in ethanol. 11-Piperazinyl-dibenzo[b,f][1,4]thiazepine was isolated as the dihydrochloride salt in ca 88% yield, m.pt. 103-105 (softens), 135-140C (decomp).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 11-Chlorodibenzo[b,f][1,4]thiazepine, its application will become more common.

Reference:
Patent; IMPERIAL CHEMICAL INDUSTRIES PLC; EP282236; (1988); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Reference of 51419-59-1,Some common heterocyclic compound, 51419-59-1, name is p-Tolylmethanesulfonyl chloride, molecular formula is C8H9ClO2S, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: Sodium hydride (60percent dispersion in mineral oil) (18 mg, 0.45 mmol) was added to a solution of 2-(4-(Piperazine-1-carbonyl)phenyl)quinazolin-4(3H)-one (4) (50 mg, 0.15 mmol) in DMF (10 mL), and the mixture was heated at 100 °C. Appropriate sulfonyl chloride (0.22 mmol) in DMF (3 mL) was added slowly to the reaction mixture. The mixture was stirred at 100 °C for 16 h. After cooling, saturated NaHCO3 solution was added. The reaction mixture was extracted with ethyl acetate and the organic phase was washed with brine. The organic phase was dried over MgSO4 and evaporated in vacuo. The residue was washed with ethyl acetate/hexane (1:10) and purified by column chromatography (ethyl acetate) to provide 2-(4-(4-(substituted)-sulfonyl)piperazine-1-carbonyl)phenyl)quinazolin-4(3H)-one.

The synthetic route of 51419-59-1 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Rhee, Hee-Kyung; Yoo, Ji Hye; Lee, Eunyoung; Kwon, Young Joo; Seo, Hang-Rhan; Lee, Yun-Sil; Choo, Hea-Young Park; European Journal of Medicinal Chemistry; vol. 46; 9; (2011); p. 3900 – 3908;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 13745-86-3, name is 11-Chlorodibenzo[b,f][1,4]thiazepine, This compound has unique chemical properties. The synthetic route is as follows., Formula: C13H8ClNS

EXAMPLE 2; Preparation of ll-piperazinyldibenzo[b,f][l,4]thiazepine; [0035] To the organic fraction recovered according to Example 1, 140 g (1.6 moles) of anhydrous piperazine is added in a reaction vessel. The temperature of the mixture is gradually increased to reflux (about 110 0C) over a period of about one hour and is kept at that temperature for about 1 to 2 hours. The heat-up is aided by the exothermic reaction that occurs. The extent of the reaction can be monitored by HPLC, but is typically completed within three hours. The reaction mixture then is cooled to ambient temperature and precipitated piperazine dihydrochloride is filtered from the product solution. An aqueous solution of MTBE and methanol (water:MTBE:methanol having a volume ratio of 2.5:1:0.6) is used to wash excess piperazine from the solution, which is removed with the aqueous phase that separates from the organic phase on standing. The organic layer can be washed one to two additional times with water.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 13745-86-3.

Reference:
Patent; CAMBREX CHARLES CITY, INC.; WO2006/135544; (2006); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 13918-92-8, name is 2,4-Difluorobenzene-1-sulfonyl chloride, A new synthetic method of this compound is introduced below., Computed Properties of C6H3ClF2O2S

General procedure: To a solution of 5-bromo-2-methoxypyridin-3-amine (2.01 g,10 mmol) in pyridine (50 mL) at 0 C was added methanesulfonylchloride (1.72 g, 11 mmol). Then the mixture was stirred at 25 C for24 h. Pyridine was removed at reduced pressure and add water (100 mL), extracted with ethyl acetate (3×100 mL), the organic layerwas washed with water (50 mL), dried with Na2SO4 and evaporated togive compound 6a as a white solid. Yield 78.4%, m.p. 150-151 C. 1HNMR (400 MHz, DMSO-d6) 9.51 (s, 1H, NH), 8.09 (d, J=2.4 Hz, 1H,Ar-H), 7.77 (d, J=2.4 Hz, 1H, Ar-H), 3.91 (s, 3H, OCH3), 3.16 (t,J=7.6 Hz, 2H, CH2), 1.73-1.65 (m, 2H, CH2), 1.42-1.33 (m, 2H, CH2),0.87 (t, J=7.2 Hz, 3H, CH3). ESI-MS: m/z 384.1 [M+H]+.Compounds 6b was synthesized according to the procedure describedin 6a.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Dong, Fu-Dan; Liu, Dan-Dan; Deng, Cheng-Long; Qin, Xiao-chun; Chen, Kai; Wang, Jian; Song, Hong-Rui; Ding, Huai-Wei; Bioorganic and Medicinal Chemistry; vol. 26; 14; (2018); p. 3982 – 3991;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 63624-28-2 as follows. Quality Control of 2,4-Dimethoxybenzene-1-sulfonyl chloride

Example 199; 1 -(2,4-Dimethoxybenzensulfonyl)-2-oxo-3-{2-oxo-1 -phenyl-2-[(S)-3-(4- propylpiperazin-1 -yl)pyrrolidin-1 -yl]ethyl}-2,3-dihydro-1 H-benzimidazole-5- carbonitrile; To a solution of 2-oxo-3-{2-oxo-1-phenyl-2-[(S)-3-(4-propyl-piperazin-1-yl)-pyrrolidin- 1-yl]-ethyl}-2,3-dihydro-1 H-benzoimidazole-5-carbonitrile (32 mg, 0.07 mmol), triethylamine (0.02 ml_, 0.13 mmol) and DMAP (catalytic amount) in CH2CI2 (2 ml.) 2,4-dimethoxybenzenesulfonyl chloride (17 mg, 0.077 mmol) was added. The reaction mixture was stirred at room temperature for 24 hours, diluted with water and extracted the aqueous phase with CH2CI2 (3 x). The combined organic phase was washed with saturated NaHCO3 aqueous solution, dried over Na2SO4, filtered and concentrated in vacuo. The residue was purified by flash chromatography in silica gel using 4% methanol in CH2CI2 as eluent to afford 1-(2,4-dimethoxy- benzenesulfonyl)-2-oxo-3-{2-oxo-1-phenyl-2-[(S)-3-(4-propyl-piperazin-1-yl)- pyrrolidin-1-yl]ethyl}-2,3-dihydro-1 H-benzoimidazole-5-carbonitrile (29 mg, 66%) as a white solid. 1H-NMR (400 MHz, CDCI3): delta 0.88-0.94 (m, 3H), 1.28 (m, 2H), 1.84 (m, 1 H), 2.14 (m, 1 H), 2.25-2.59 (m, 9H), 2.79-3.12 (m, 2H), 3.23-3.58 (m, 2H), 3.48 (s, 3H), 3.73- 3.99 (m, 2H), 3.89 (s, 3H), 6.36-6.44 (m, 2H), 6.65 (d, 8.9 Hz, 1 H), 7.00-7.10 (m, 1 H), 7.22-7.26 (m, 2H), 7.34-7.39 (m, 4H), 7.94 (d, 8.5 Hz, 1 H), 8.14 (d, 8.9 Hz, 1 H). MS (API-ES, pos) m/z = 673

According to the analysis of related databases, 63624-28-2, the application of this compound in the production field has become more and more popular.

Reference:
Patent; ABBOTT GMBH & CO. KG; WO2008/25736; (2008); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 1996-29-8, name is 1-Bromo-4-chloro-2-fluorobenzene belongs to chlorides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below. COA of Formula: C6H3BrClF

To a stirred solution of l-Bromo-4-chloro-2-fluorobenzene Al (200 g, 0.955 mol, 1.0 equiv.) in anhydrous THF (2.0 L) was added 2.0 M lithium diisopropylamide (LDA) in THF (620 mL, 1.24 mol, 1.3 equiv.) at -50 C, the reaction mixture was allowed to -20 C and stirred for 1 h. Then it was re-cooled to -50 C and slowly added DMF (184.8 mL, 2.48 mol, 2.6 equiv.) at the same temperature. The mixture was allowed to 0 C and stirred for 30-45 min. After completion of the reaction (monitored by TLC), it was quenched with the slow addition of ice cold water (2.0 L); then diluted with ethyl acetate (2.0 L) and stirred for 15 min at room temperature. The organic layer was separated and aqueous layer was extracted with ethyl acetate (2 x 1.0 L). The combined organic layers were washed with water (2 x 1 0 L); 1.0 N HC1 (1 0 L) and 1 % NaCl solution (2.0 L). The organic layer was dried over anhydrous Na2SC , concentrated under vacuum. The resultant crude solid was directly used for next step without further purification. Yield: 210.0 g, 93% (reported 78%). NMR (400 MHz, CDCb): delta 10.39 (d, J= 0.8 Hz, 1H), 7.69 (dd, Ji = 7.2 Hz, J2 = 8.8 Hz, 1H), 7.19 (dd, Ji = 1.2 Hz, J2 = 8.4 Hz, 1H).

The synthetic route of 1996-29-8 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; VIIV HEALTHCARE UK (NO.5) LIMITED; BABU, Suresh; BELEMA, Makonen; BENDER, John A; IWUAGWU, Christiana; KADOW, John F.; KUMARAVEL, Selvakumar; NAGALAKSHMI, Pulicharla; NAIDU, B. Narasimhulu; PATEL, Manoj; PEESE, Kevin M; RAJAMANI, Ramkumar; SAULNIER, Mark; WANG, Alan Xiangdong; (536 pag.)WO2018/203235; (2018); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics