Tag: M.W=100-200

Electric Literature of 20850-43-5, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 20850-43-5 name is 5-(Chloromethyl)benzo[d][1,3]dioxole, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

ake 10g about 89.7% content of piperazine pyrimidine, 12g triethylamine, 34ml isopropanol into 100ml three reaction flask, dropping peppermint chloride at room temperature under stirring, dropping over 30 minutes. Heated to 50 , incubated for 2 hours, cooled to room temperature with stirring, filtered, the mother liquor was recovered, the filter cake was added 20ml water beating, suction filtration, plus 10ml water washing cake. 50 drying, get piribedil crude 16.6g, HPLC analysis content of 99.2%. Yield 92%; 16g of crude piribedil (99.2%), 0.3g of activated charcoal and 42ml of absolute ethanol were added into a 100ml single-necked flask and heated to the reflux temperature for 0.5 hour. The activated carbon was removed by hot filtration and the filtrate was cooled and crystallized under stirring to obtain a white Crystalline solid. Filtered, rinsed with a small amount of anhydrous ethanol, and dried to obtain 14.76g of the first crystal product of piribedil, the content of which was 99.90% by HPLC and the refined yield was 90.33%.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 5-(Chloromethyl)benzo[d][1,3]dioxole, and friends who are interested can also refer to it.

Reference:
Patent; Taicang Datang Chemical Fiber Factory; Liu Huifeng; (9 pag.)CN107266429; (2017); A;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 870-24-6, name is 2-Chloroethanamine hydrochloride, A new synthetic method of this compound is introduced below., SDS of cas: 870-24-6

Step-I: 2-(2-Methyl-1H-pyrrol-1-yl)ethanamineSodium hydroxide anhydrous (9.87 g, 0.246 mol, 4.0 eq.) and TBAHS (0.838 g, 0.002 mol, 0.04 eq.) were added to a solution of 2-methyl-1 H-pyrrole (5.0 g, 0.061 mol, 1.0 eq.) in acetonitrile (180 ml) at 0 C and the mixture was stirred at RT for 1 h. 2-Chloroethylamine hydrochloride (8.59 g, 0.074 mol, 1.2 eq.) was added to the reaction mixture and it was then heated at reflux for 16 h. The reaction mixture was cooled to RT, filtered through celite and washed with 10% MeOH/DCM (200 ml). The filtrate was concentrated under reduced pressure to give the crude product which was used in the next step without further purification.Yield: 100 %, crude (7.6 g, 0.061 mol)

The synthetic route of 870-24-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; GRUeNENTHAL GMBH; REICH, Melanie; SCHUNK, Stefan; OBERBOeRSCH, Stefan; JOSTOCK, Ruth; GERMANN, Tieno; ENGELS, Michael; WO2012/28331; (2012); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Reference of 452-73-3, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 452-73-3, name is 2-Chloro-4-fluoro-1-methylbenzene belongs to chlorides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

STR18 At 25 C. to 30 C., 180 g (1.125 mol) of bromine are added dropwise to a mixture of 144 g (1.0 mol) of 2-chloro-4-fluoro-toluene and 1 g of iron (powder), resulting in a strong evolution of gas. After the addition, the mixture is stirred at about 30 C. for approximately 2 hours. 100 ml of water are then added, and the mixture is decolourized by addition of sodium bisulfite. The organic phase is then separated off and distilled under reduced pressure. This gives 188 g (82% of theory) of 3-bromo-2-chloro-4-fluoro-toluene of boiling point 67 C. to 68 C. at 10 mbar.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-Chloro-4-fluoro-1-methylbenzene, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Bayer Aktiengesellschaft; US6060605; (2000); A;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 2106-04-9, name is 3-Chloro-2-fluoroaniline, A new synthetic method of this compound is introduced below., category: chlorides-buliding-blocks

Step A3: 2-[(3-Chloro-2-fluoro-phenylamino)-(4-chloro-2-methyl-phenyl)-methyl]-1-isopropyl-1H-Pyrrole-3-carboxylic acid ethyl ester Methanesulfonyl chloride (10.62 mmol) was added to a mixture of 2-[(4-chloro-2-methyl-phenyl)-hydroxy-methyl]-1-isopropyl-1H-pyrrole-3-carboxylic acid ethyl ester (Step A4) (4.09 mmol), pyridine (14.01 mmol) and DMAP (1.226 mmol) in CH2Cl2 (70 mL). After stirring for 20 h, the reaction mixture was diluted with CH2Cl2 and washed with a saturated aqueous solution of NH4Cl (2*). The combined aqueous phases were back-extracted with CH2Cl2. The combined organic phases were dried (Na2SO4), filtered and concentrated. A mixture of the crude intermediate and 3-chloro-2-fluoro-phenylamine [2106-04-9] (11.64 mmol) in dioxane (90 mL) was stirred at 90 C. for 11 h. After cooling to rt, the reaction mixture was diluted with EtOAc and successively washed with 10% w/w aqueous citric acid and brine. The combined aqueous phases were back-extracted with EtOAc. The combined organic phases were dried (Na2SO4), filtered and concentrated. The residue was purified using a RediSep silica gel column to afford the title compound as a yellow solid. tR: 9.08 min (HPLC 2); ESI-MS: tR=1.54 min, [M]+318/320 (i.e. fragmented pyrrolium ion) (LC-MS 1); TLC: Rf=0.45 (1:4 EtOAc/hexanes).

The synthetic route of 2106-04-9 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; NOVARTIS AG; Cotesta, Simona; Furet, Pascal; Guagnano, Vito; Holzer, Philipp; Kallen, Joerg; Mah, Robert; Masuya, Keiichi; Schlapbach, Achim; Stutz, Stefan; Vaupel, Andrea; US2013/317024; (2013); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 13078-79-0, name is 2-(3-Chlorophenyl)ethanamine, A new synthetic method of this compound is introduced below., COA of Formula: C8H10ClN

To a solution of 2-(3-chlorophenyl)ethanamine (0.778 g, 5 mmol) and triethyl amine (1.05 mL, 7.5 mmol) in dichloromethane, was added 2,4,6- trimethylbenzene- l-sulfonyl chloride (1.09 g, 5 mmol) portion wise. The mixture was allowed to stir for 1 h at ambient temperature. The reaction mixture was washed with HC1 (2N) (3 x 50 mL), water and brine. The organic layer was dried over anhydrous MgS04 and concentrated in vacuo to obtain the title compound.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; THE SCRIPPS RESEARCH INSTITUTE; KAMENECKA, Theodore, Mark; BURRIS, Thomas; WO2014/85453; (2014); A2;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Electric Literature of 2770-01-6, A common heterocyclic compound, 2770-01-6, name is 4-Chloro-1H-imidazo[4,5-c]pyridine, molecular formula is C6H4ClN3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Step A Preparation of 3-[4-(1-carbomethoxy-1-(3,4-methylenedioxy-phenyl)methoxy)-3,5-dipropylphenylmethyl]-4-chloro-3H-imidazo[4,5-c]pyridine Cesium carbonate (117.3 mg, 0.36 mmol) was added to 4-chloroimidazo[4,5-c]pyridine (25 mg, 0.18 mmol) in DMF (2 mL) at room temperature under nitrogen. After stirring for 15 min, a solution of 4-(1-carbomethoxy- 1-(3,4-methylenedioxyphenyl)methoxy)-3,5-dipropylbenzyl bromide (106.5 mg, 0.23 mmol) in DMF (2 mL) was added and the mixture stirred at room temperature for 12 h. The mixture was poured onto ice/water and the crude product that precipitated was collected by filtration. The crude material was pre-adsorbed on silica gel and chromatographed (0 to 50% hexane/ethyl acetate) to afford the title compound (25 mg). 1 H-NMR (CDCl3): delta 8.24 (d, 1H), 8.00 (s, 1H), 7.68 (d, 1H), 7.04 (s, 1H), 6.88 (d, 1H), 6.82 (s, 2H), 6.75 (d, 1H), 5.96 (s, 2H), 5.60 (s,2H), 5.00 (s, 1H), 3.71 (s,3H), 2.35 (m, 4H), 1.40 (m, 4H), 0.78 (t, 6H).

The synthetic route of 2770-01-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Merck & Co., Inc.; US5334598; (1994); A;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Application of 2770-01-6, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 2770-01-6, name is 4-Chloro-1H-imidazo[4,5-c]pyridine belongs to chlorides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

The chiral cyclopentenyl moiety 5 (below) was prepared from D-ribose in 8 steps following a previously reported synthetic method via a chiral induction, a regioselective protection of hydroxy group and ring-closing metathesis with 0.1 mole% of the 2nd generation Grubbs catalyst as key steps. 10; The other key intermediate 7 was synthesized according to the previously reported procedure11 from commercially available 4-amino-2-chloropyridine (6) in 4 steps (overall 54% yield) as shown in Scheme 1. Mitsunobu reaction of 7 with 5 provided a mixture of the N9- and N7-regioisomers (8:9 = 2:1) in 94% yield. The separation of the desired product (8) from the reaction mixture was difficult by silica gel column [isolated yields: 20% (8) and 20% (9), respectively]. The ratio of the two isomers was determined by 1H-NMR, and their configuration was identified by Nuclear Overhouser Effect (ID-NOE), which indicated the interaction between the C1 ‘-H and the aromatic C3-H of compound 8, whereas the same effect was not present in compound 9.

The synthetic route of 4-Chloro-1H-imidazo[4,5-c]pyridine has been constantly updated, and we look forward to future research findings.

Reference:
Patent; UNIVERSITY OF GEORGIA RESEARCH FOUNDATION, INC.; WO2007/47793; (2007); A2;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Some common heterocyclic compound, 622-24-2, name is (2-Chloroethyl)benzene, molecular formula is C8H9Cl, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Recommanded Product: (2-Chloroethyl)benzene

General procedure: One of 4a-d (1 equiv.) and K2CO3 (3 equiv.) in DMF was stirred at 90C for 1h, then the solution was allowed to cool to 60C and was added different substituted benzyl chlorides or phenyl ethyl chlorides (3 equiv.). The reaction mixture was stirred at 60C for another 7h and allowed to cool to room temperature. The saturated NH4Cl solution was added to quench the reaction. The mixture was diluted with water and extracted with ethyl acetate to afford the crude product that was purified by flash column chromatography on silica gel to yield the target products.4.1.5.1 3-Phenethylbenzo[d]oxazol-2(3H)-one (7a) [39] (0039) White solid. Yield 86%. Mp 116-118C. 1H NMR (300MHz, Chloroform-d): delta(ppm) 7.29 (d, J=7.7Hz, 3H), 7.20 (s, 3H), 7.10 (t, J=5.9Hz, 2H), 6.79 (d, J=7.1Hz, 1H), 4.06 (t, J=7.4Hz, 2H), 3.08 (t, J=7.2Hz, 2H). MS (EI): m/z 240.3 [M+H]+. IR (KBr): 3061, 1767, 1614, 1489, 1258cm-1.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 622-24-2, its application will become more common.

Reference:
Article; Zou, Yi; Wang, Yan; Wang, Fang; Luo, Minghao; Li, Yuezhen; Liu, Wen; Huang, Zhangjian; Zhang, Yihua; Guo, Wenjie; Xu, Qiang; Lai, Yisheng; European Journal of Medicinal Chemistry; vol. 138; (2017); p. 199 – 211;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 2106-04-9, name is 3-Chloro-2-fluoroaniline, This compound has unique chemical properties. The synthetic route is as follows., Application In Synthesis of 3-Chloro-2-fluoroaniline

4. 0M HCI in Dioxane (4.0 ml) was added to a stirred suspension of 7- (benzyloxy)-4- chloro-6-methoxyquinazoline (CAS Registry NOL62364-72-9, prepared as described in W098/13354, Example 1) (60 g, 0.2 mol) and 3-CHLORO-2-FLUOROANILINE (31.96 g, 0.22 mol) in acetonitrile (1200 ml). The reaction mixture was heated at 80C for 1 hour then left to stand overnight. Acetonitrile (500 ml) was added and the resulting precipitate filtered, washed with acetonitrile (3 x 500 ml) and dried under vacuum to give 7- (BENZYLOXY)-N- (3-CHLORO-2- fluorophenyl) -6-methoxyquinazolin-4-amine hydrochloride as a beige solid (85.45 g, 96%);

According to the analysis of related databases, 2106-04-9, the application of this compound in the production field has become more and more popular.

Reference:
Patent; ASTRAZENECA AB; ASTRAZENECA UK LIMITED; WO2005/26150; (2005); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Reference of 367-22-6,Some common heterocyclic compound, 367-22-6, name is 4-Chloro-3-fluoroaniline, molecular formula is C6H5ClFN, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: A solution of the corresponding 1H-indazole-5-carbaldehyde(2), 1-methyl-1H-indazole-5-carbaldehyde (9) or 1-(2-methoxyethyl)-1H-indazole-5-carbaldehyde (10) (1.0 equiv.),different substituted anilines 3e6 (1.1 equiv.) and acetic acid(0.1 mL/mmol, pH 4e5) in ethanol (3.0 mL/mmol) was stirred underreflux until a precipitation took place. After cooling to roomtemperature, the reaction mixture was sonificated until completeprecipitation. The precipitate formed was filtered and dried at70 C. The crude product was purified by column chromatographyon silica gel (mobile phase: dichloromethane/MeOH 9/1 v/v) andrecrystallized three times from petroleum ether/dichloromethane.

The synthetic route of 367-22-6 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Tzvetkov, Nikolay T.; Stammler, Hans-Georg; Georgieva, Maya G.; Russo, Daniela; Faraone, Immacolata; Balacheva, Aneliya A.; Hristova, Silvia; Atanasov, Atanas G.; Milella, Luigi; Antonov, Liudmil; Gastreich, Marcus; European Journal of Medicinal Chemistry; vol. 179; (2019); p. 404 – 422;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics