Tag: M.W=100-200

Reference of 20850-43-5, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 20850-43-5 name is 5-(Chloromethyl)benzo[d][1,3]dioxole, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

ake 10g about 89.7% content of piperazine pyrimidine, 12g triethylamine, 34ml isopropanol into 100ml three reaction flask, dropping peppermint chloride at room temperature under stirring, dropping over 30 minutes. Heated to 50 , incubated for 2 hours, cooled to room temperature with stirring, filtered, the mother liquor was recovered, the filter cake was added 20ml water beating, suction filtration, plus 10ml water washing cake. 50 drying, get piribedil crude 16.6g, HPLC analysis content of 99.2%. Yield 92%; 16g of crude piribedil (99.2%), 0.3g of activated charcoal and 42ml of absolute ethanol were added into a 100ml single-necked flask and heated to the reflux temperature for 0.5 hour. The activated carbon was removed by hot filtration and the filtrate was cooled and crystallized under stirring to obtain a white Crystalline solid. Filtered, rinsed with a small amount of anhydrous ethanol, and dried to obtain 14.76g of the first crystal product of piribedil, the content of which was 99.90% by HPLC and the refined yield was 90.33%.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 5-(Chloromethyl)benzo[d][1,3]dioxole, and friends who are interested can also refer to it.

Reference:
Patent; Taicang Datang Chemical Fiber Factory; Liu Huifeng; (9 pag.)CN107266429; (2017); A;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Synthetic Route of 2770-01-6, A common heterocyclic compound, 2770-01-6, name is 4-Chloro-1H-imidazo[4,5-c]pyridine, molecular formula is C6H4ClN3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Step A Preparation of 3-[4-(1-carbomethoxy-1-(3,4-methylenedioxy-phenyl)methoxy)-3,5-dipropylphenylmethyl]-4-chloro-3H-imidazo[4,5-c]pyridine Cesium carbonate (117.3 mg, 0.36 mmol) was added to 4-chloroimidazo[4,5-c]pyridine (25 mg, 0.18 mmol) in DMF (2 mL) at room temperature under nitrogen. After stirring for 15 min, a solution of 4-(1-carbomethoxy- 1-(3,4-methylenedioxyphenyl)methoxy)-3,5-dipropylbenzyl bromide (106.5 mg, 0.23 mmol) in DMF (2 mL) was added and the mixture stirred at room temperature for 12 h. The mixture was poured onto ice/water and the crude product that precipitated was collected by filtration. The crude material was pre-adsorbed on silica gel and chromatographed (0 to 50% hexane/ethyl acetate) to afford the title compound (25 mg). 1 H-NMR (CDCl3): delta 8.24 (d, 1H), 8.00 (s, 1H), 7.68 (d, 1H), 7.04 (s, 1H), 6.88 (d, 1H), 6.82 (s, 2H), 6.75 (d, 1H), 5.96 (s, 2H), 5.60 (s,2H), 5.00 (s, 1H), 3.71 (s,3H), 2.35 (m, 4H), 1.40 (m, 4H), 0.78 (t, 6H).

The synthetic route of 2770-01-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Merck & Co., Inc.; US5334598; (1994); A;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Electric Literature of 4152-90-3, A common heterocyclic compound, 4152-90-3, name is (3-Chlorophenyl)methanamine, molecular formula is C7H8ClN, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: A mixture of amide (5mmol), amine (5mmol), [Ru?NHC] complex (0.5molpercent) and toluene (5mL) was stirred in a sealed tube under nitrogen atmosphere at 110°C for 8h. After cooling down to room temperature, the reaction solvent was removed under vacuum. After removal of the solvent, the crude reaction mixture was dissolved in CH2Cl2 and purified by column chromatography on silica gel (200?400mesh) eluting with heptane:ethanol [25:1] to give corresponding amides as a white solid. The yields are mentioned in Tables 3?5. The product was confirmed by NMR spectroscopy. Reported isolated yields are an average of two runs.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Nirmala, Muthukumaran; Prakash, Govindan; Viswanathamurthi, Periasamy; Malecki, Jan Grzegorz; Journal of Molecular Catalysis A: Chemical; vol. 403; (2015); p. 15 – 26;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Application of 367-22-6,Some common heterocyclic compound, 367-22-6, name is 4-Chloro-3-fluoroaniline, molecular formula is C6H5ClFN, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: A solution of the corresponding 1H-indazole-5-carbaldehyde(2), 1-methyl-1H-indazole-5-carbaldehyde (9) or 1-(2-methoxyethyl)-1H-indazole-5-carbaldehyde (10) (1.0 equiv.),different substituted anilines 3e6 (1.1 equiv.) and acetic acid(0.1 mL/mmol, pH 4e5) in ethanol (3.0 mL/mmol) was stirred underreflux until a precipitation took place. After cooling to roomtemperature, the reaction mixture was sonificated until completeprecipitation. The precipitate formed was filtered and dried at70 C. The crude product was purified by column chromatographyon silica gel (mobile phase: dichloromethane/MeOH 9/1 v/v) andrecrystallized three times from petroleum ether/dichloromethane.

The synthetic route of 367-22-6 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Tzvetkov, Nikolay T.; Stammler, Hans-Georg; Georgieva, Maya G.; Russo, Daniela; Faraone, Immacolata; Balacheva, Aneliya A.; Hristova, Silvia; Atanasov, Atanas G.; Milella, Luigi; Antonov, Liudmil; Gastreich, Marcus; European Journal of Medicinal Chemistry; vol. 179; (2019); p. 404 – 422;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 15205-11-5, name is 2-Chloro-4-fluorobenzylamine, This compound has unique chemical properties. The synthetic route is as follows., SDS of cas: 15205-11-5

To a stirred mixture of 1-(2-chloro-4-fluorophenyl)methanamine (80 mg, 0.501 mmol, 1 equiv.) and 4-chloro-5-(4-oxopiperidin-1-yl)-2,3-dihydropyridazin-3-one (114.12 mg, 0.501 mmol, 1.00 equiv.) in DMF (5 mL) were added 1-azido-4-nitrobenzene (115.18 mg, 0.702 mmol, 1.4 equiv.) and Zn(OAc)2 (91.98 mg, 0.501 mmol, 1 equiv.) at room temperature. The resulting mixture was stirred for 16 h at 60 degrees C. The reaction was monitored by LCMS.The mixture was allowed to cool down to room temperature. The mixture was purified by reverse phase flash with the following conditions (Column:C18,330 g; Mobile Phase A: Water/0.05% NH4HCO3, Mobile Phase B:ACN; Flow rate:80 mL/min;Gradient: 35%B to 50%B in 15 min; Detector,220nm and 254nm) to afford crude product. The crude product (30 mg) was purified by Prep-HPLC with the following conditions (Column: XBridge Shield RP18 OBD Column, 5um,19*150mm; Mobile Phase A: Water(10MMOL/L NH4HCO3), Mobile Phase B: ACN; Flow rate: 25 mL/min; (1701) Gradient: 5% B to 16% B in 1 min; 254/220 nm; Rt: 7.47 min) to afford 4-chloro-5-[1-[(2- chloro-4-fluorophenyl)methyl]-1H,4H,5H,6H,7H-[1,2,3]triazolo[4,5-c]pyridin-5-yl]-2,3- dihydropyridazin-3-one(8.3mg,4.19%) as a white solid

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 15205-11-5.

Reference:
Patent; GOLDFINCH BIO, INC.; YU, Maolin; DANIELS, Matthew, H.; HARMANGE, Jean-christophe, P.; TIBBITTS, Thomas, T.; LEDEBOER, Mark, W.; WALSH, Liron; MUNDEL, Peter, H.; MALOJCIC, Goran; (860 pag.)WO2019/55966; (2019); A2;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 7149-75-9, name is 4-Chloro-3-methylaniline, This compound has unique chemical properties. The synthetic route is as follows., Application In Synthesis of 4-Chloro-3-methylaniline

Step 1 (0642) To a mixture of 1-(3-bromo-4-methylphenyl)ethanone (1.51 g), 4-chloro-3-methylphenylamine (1.0 g) and methanol (14 mL) was added decaborane (259 mg), and the mixture was stirred at room temperature for 12 hours. After the mixture was diluted with ethyl acetate, to the resulting mixture was added aminopropyl silica gel powder (5 g). The resulting mixture was filtered and the filtrate was concentrated under reduced pressure to give [1-(3-bromo-4-methylphenyl)ethyl]-(4-chloro-3-methylphenyl)amine (1.99 g).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 7149-75-9.

Reference:
Patent; Kissei Pharmaceutical Co., Ltd.; Inoue, Hitoshi; Ohno, Kohsuke; Nakamura, Tetsuya; Ohsawa, Yusuke; (58 pag.)US2016/362368; (2016); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 2163-00-0, name is 1,6-Dichlorohexane belongs to chlorides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below. category: chlorides-buliding-blocks

A 250 mL four-necked flask equipped with a mechanical stirrer, a thermometer and a reflux condenser was used as the reaction vessel. 32. 3 g (0.13 mol) of sodium thiosulfate pentahydrate was weighed out, 70.0 g of water and 35. 0 g of DMF were added, After stirring and dissolving, 9.3 g (0.06 mol) of 1,6-dichlorohexane was added while stirring. The temperature of the solution was raised by heating, and the temperature of the reaction solution was raised to 90 C. The reaction was stirred at this temperature for 6 h, Hexamethylene-1,6-dithiosulfate disodium salt (HTS) solution. The resulting hexamethylene-1,6-dithio-sulfate disodium salt solution was analyzed by a gas chromatograph (GC) and a liquid chromatograph (HPLC), respectively, to measure 1,6-dichlorohexane and thiosulfate Sodium in the solution

The synthetic route of 2163-00-0 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Beijing Red Avenue Innova Co., Ltd; Zhen, Boming; Dong, Dong; Zhao, Lili; fang, Caiqin; Ruan, zhen Gang; Hu, Xiaona; (10 pag.)CN105218419; (2016); A;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Electric Literature of 39065-95-7, A common heterocyclic compound, 39065-95-7, name is 4-(Chlorodifluoromethoxy)aniline, molecular formula is C7H6ClF2NO, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a mixture of 1,2-dimethyl-4-(pyrimidin-5-yl)-1H-benzo[d]imidazole-6-carboxylic acid (4d, 15 mg, 0.056 mmol, 1 eq) and HATU (25.51 mg, 0.067 mmol, 1.2 eq), DIPEA (14.45 mg, 0.112 mmol, 19.48 uL, 2 eq) in DMF (1 mL) at 20 C. was added 4-[chloro(difluoro)methoxy]aniline (1h, 16.24 mg, 0.084 mmol, 1.5 eq). The mixture was stirred at 20 C. for 16 hours. The mixture was concentrated in vacuo. LCMS showed desired MS. The mixture was poured into water and extracted with EtOAc, and the combined organic layers were dried over anhydrous Na2SO4, filtered and concentrated in vacuo to give the crude product. The residue was purified by prep-HPLC (TFA condition, column: Nano-Micro UniSil 5-100 C18 ULTRA 100*250 mm 5 um; mobile phase: [water (0.1%TFA)-ACN]; B %: 25%-50%, 11 min) to afford the title compound 4 as a white solid. MS mass calculated for [M+H]+ (C21H16ClF2N5O2) requires m/z 444.1, LCMS found m/z 444.1. 1H NMR (400 MHz, MeOD-d4) delta 9.33-9.25 (m, 3H), 8.48 (s, 1H), 8.25 (s, 1H), 7.88 (d, J=9.0 Hz, 2H), 7.33 (d, J=8.8 Hz, 2H), 4.07 (s, 3H), 2.85 (s, 3H).

The synthetic route of 39065-95-7 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Terns, Inc.; ROMERO, F. Anthony; KIRSCHBERG, Thorsten A.; HALCOMB, Randall; XU, Yingzi; (144 pag.)US2020/87283; (2020); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 2106-02-7, name is 2-Chloro-4-fluoroaniline, A new synthetic method of this compound is introduced below., Quality Control of 2-Chloro-4-fluoroaniline

Step 1 4-r2-Chloro-4-fluorophenylaminoV5.6.3′.4′.5′.6′-hexahvdro-2’H-?a’1bipyridinyl-2- one [l,r]-Bipiperidinyl-2,4-dione (2.00 g, 10.19 mmol) was dissolved in toluene (8 ml) and 2- chloro-4-fluorophenylamine (1.78 g, 12.23 mmol) was added. More toluene (5 ml) was added. The reaction mixture was boiled under reflux at 110 C for 17 h then allowed to cool. When the reaction mixture reached rt the product precipitated and it was collected by filtration to yield a beige solid (1.80 g, 55%). 1H-NMR (400 MHz, CDCl3) delta 7.41-7.32 (IH, m), 7.18-7.09 (IH, m), 7.00-6.90 (IH, m), 5.51 (IH, s), 5.11 (IH, s), 3.54 (2H, t), 3.38-2.67 (4H, br), 2.57 (2H, t), 1.74-1.50 (4H, m), 1.43-1.30 (2H, m).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; ASTRAZENECA AB; ASTRAZENECA UK LIMITED; WO2008/96151; (2008); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

1939-99-7, name is Phenylmethanesulfonyl chloride, belongs to chlorides-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. HPLC of Formula: C7H7ClO2S

A solution of phenylmethanesulfonyl chloride (2.19 g, 10 mmol) was added into a suspension of 3-bromopropan-1-amine hydrobromide (2.19 g, 10 mmol) and Et3N (2.02 g, 20 mmol) in THF (50 mL) at 0 C. The mixture was stirred at 0 C for 5 mi TLC confirmed the completion of reaction. Solid was filtered out with suction, and the filtrate was concentrated to provide compound N-(3-bromopropyl)(phenyl)methanesulfonamide (2.7 g, quant.) as a pale yellow solid which was used in the next step without further purification. ?H NMR (300 MHz, CDC13) oe 7.40 (m, 5H), 4.48 (m, 1H), 4.27 (s, 2H), 3.41 (t, J = 6.6 Hz, 2H), 3.16 (q, 2H), 2.01 (m, 2H). LCMS (ESI), mlz, 314 and 316 [M+Na], Br pattern found.

The synthetic route of 1939-99-7 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; GENENTECH, INC.; FAUBER, Benjamin; RENE, Olivier; WO2014/202741; (2014); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics