Chlorides-buliding-blocks

Related Products of 918538-05-3,Some common heterocyclic compound, 918538-05-3, name is 2,4-Dichloropyrrolo[2,1-f][1,2,4]triazine, molecular formula is C6H3Cl2N3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a 100 mL flask was added 2,4-dichloropyrrolo[2,1-f][1,2,4]triazine 23 (15.96 mmol), and tetrahydrofuran (40 mL). To the resulting solution was added sodium phenolate (17.55 mmol) portion wise. After 1 h, an aliquot of the reaction mixture was diluted with methanol and analyzed by LCMS to ensure complete conversion. The reaction mixture was concentrated. The residue was stirred with water, filtered, washed extensively with water and dried to obtain 2-chloro-4-phenoxypyrrolo[2,1-f][1,2,4]triazine 24.

The synthetic route of 918538-05-3 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Harikrishnan, Lalgudi S.; Warrier, Jayakumar; Tebben, Andrew J.; Tonukunuru, Gopikishan; Madduri, Sudhakara R.; Baligar, Vishweshwaraiah; Mannoori, Raju; Seshadri, Balaji; Rahaman, Hasibur; Arunachalam; Dikundwar, Amol G.; Fink, Brian E.; Fargnoli, Joseph; Fereshteh, Mark; Fan, Yi; Lippy, Jonathan; Ho, Ching-Ping; Wautlet, Barri; Sheriff, Steven; Ruzanov, Max; Borzilleri, Robert M.; Bioorganic and Medicinal Chemistry; vol. 26; 5; (2018); p. 1026 – 1034;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 106-39-8, name is 1-Bromo-4-chlorobenzene, A new synthetic method of this compound is introduced below., Application In Synthesis of 1-Bromo-4-chlorobenzene

A flame-dried Schlenk flask was charged with tris(dibenzylideneacetone)palladium (4.6 mg, 0.005 mmol), 1 (4.4 mg, 0.025 mmol) or 6a (11.9 mg, 0.025 mmol), sodium terf-butoxide (134 mg, 1.40 mmol) and toluene (2.0 ml_) under nitrogen. Aryl bromide (1.00 mmol) and amine (1.10 mmol) were added and the resulting red solution heated at 800C with rapid stirring until reaction was complete, as judged by GC analysis. The reaction mixture was allowed to cool to room temperature, diluted with diethyl ether, passed through celite and the solvent removed to leave a yellow solid. Known products were characterised by NMR spectroscopy and mass spectrometry and unknown products by NMR spectroscopy, mass spectrometry and high resolution mass spectrometry (HRMS). The conversions were calculated using GC analysis as an average over three repeats.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; UNIVERSITY OF NEWCASTLE UPON TYNE; WO2009/138708; (2009); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

These common heterocyclic compound, 89794-02-5, name is 4-Bromo-2-chlorotoluene, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. name: 4-Bromo-2-chlorotoluene

(i) Alkoxycarbonylation reactions of different aryl bromides using different phosphonium salts 0.0025 mmol Pd(OAc)2, 0.0075 mmol ligand (phosphonium salt) and 0.385 mmol TMEDA were diluted with n-butanol to a total volume of 10 ml. 0.5 mmol of each substrate was introduced directly in the autoclaves, and then 1 ml of the catalyst solution was added to the autoclave. After purging with carbon monoxide the pressure was set to 25 bar CO and the autoclave was stirred while warming up to 115C. The reactions were hold at 115C for 20h. After cooling down and releasing the pressure the raw mixtures were filtered through a short path of Al2O3 and the conversion was determined via GC.

The synthetic route of 4-Bromo-2-chlorotoluene has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Evonik Degussa GmbH; EP1894938; (2008); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

2106-04-9, Adding some certain compound to certain chemical reactions, such as: 2106-04-9, name is 3-Chloro-2-fluoroaniline, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 2106-04-9.

Example 40 7-[2-Amino-6-(4-methylpiperazin-1-yl)pyrimidin-4-yl]-N-(3-chloro-2-fluorophenyl)-3,4-dihydroisoquinoline-2(1H)-carboxamide To a solution of 20% phosgene in toluene (phosgene:toluene=1:4, 54.9 uL, 0.104 mmol) was added a solution of 3-chloro-2-fluoroaniline (6.5 mg, 0.045 mmol) (Aldrich, Cat. #530174) and triethylamine (19.3 uL, 0.138 mmol) in THF (0.4 mL). The resulting mixture was stirred at r.t. for 2 h., and concentrated. To the residue was added a solution of 4-(4-methylpiperazin-1-yl)-6-(1,2,3,4-tetrahydroisoquinolin-7-yl)pyrimidin-2-amine HCl salt (15 mg, 0.034 mmol) and triethylamine (19.3 uL, 0.138 mmol) in acetonitrile (0.4 mL). The reaction mixture was stirred at r.t. for 30 min The mixture was purified by RP-LCMS (pH=10) to afford the desired product. Analytic LCMS (M+H)+: m/z=496.1/498.1.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 2106-04-9.

Reference:
Patent; INCYTE CORPORATION; US2010/240671; (2010); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 90390-33-3, name is 3-Chloro-5-fluorobenzylamine, belongs to chlorides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 90390-33-3, 90390-33-3

A solution of compound ethyl 2-oxopyrrolidine-3-carboxylate (180.00 g, 929.61 mmol) and (3-chloro-5-fluorophenyl) methanamine (148.36 g, 929.61 mmol) in xylene (4.00 L) is heated to 130 C for 16 hours. LCMS showed the starting material is still present. The reaction mixture is cooled to 10 C and a solid precipitates out after 30 minutes. The suspension is filtered and the filter cake is washed with xylene (3 x500 mL), petroleum ether (2×500 mL), and dried under vacuum to give the desired product (81 g). The filtrates are concentrated under reduced pressure and the residue in xylene (3 L) is heated to 130 C for 40 hours. The reaction mixture is cooled to 10 C and the solid precipitates out after 30 minutes. The suspension is filtered and the filter cake is washed with xylene (2×500 mL), petroleum ether (2×500 mL) and dried in vacuum to give the title product (81.38 g) which is combined with the first lot to give a title product (164.38 g, 607.26 mmol, 65.32% yield) as a white solid. ES/MS m/z 270.9 (M+l).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 3-Chloro-5-fluorobenzylamine, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; ELI LILLY AND COMPANY; LILLY CHINA RESEARCH AND DEVELOPMENT CO., LTD; HO, Koc Kan; QUAN, Weiguo; ZHOU, Jingye; (51 pag.)WO2018/102256; (2018); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Adding some certain compound to certain chemical reactions, such as: 13726-14-2, name is 4-Chloro-3-methoxyaniline, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 13726-14-2. 13726-14-2

Ethyl 2-chloro-4-(4-chloro-3-methoxyphenylamino)pyrimidine-5-carboxylate (RJ1- 061): A mixture of ethyl 2,4-dichloropyrimidine-5-carboxylate (0.442 g, 2.0 mmol), 4-chloro-3- methoxyaniline (0.331 g, 2.1 mmol), DIPEA (0.42 mL, 2.4 mmol), and iPrOH (2 mL) was added to a 5 mL microwave vial which was then sealed and placed in a hot oil bath with stirring at 85 C overnight for 17 hours. At this point, a brown solid had formed and this was then washed with iPrOH (10 mL), water (10 mL), iPrOH (10 mL), and hexanes (10 mL) to yield RJ1-061 as a brown solid (0.570 g, 83%). m.p. = 119 C (decomposed). XH NMR (400 MHz, DMSO-) delta 10.27 (s, 1H), 8.81 (s, 1H), 7.48 (d, J= 2.3 Hz, 1H), 7.43 (d, J= 8.6 Hz, 1H), 7.28 (dd, J= 8.6, 2.3 Hz, 1H), 4.37 (q, J= 7.1 Hz, 2H), 3.85 (s, 3H), 1.34 (t, J= 7.1 Hz, 3H). LRMS (ESI+) m/z 342.1 (MC135C135+H)+, 344.0 (MC135C137+H)+, 346.0 (MC137C137+H)+; (ESI-) m/z 339.3 (MC135C135-H)-; HRMS (ESI+) m/z calculated for C14H13CI2N3O3 (M+H)+ 342.04067, found 342.04100.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 4-Chloro-3-methoxyaniline.

Reference:
Patent; H. LEE MOFFITT CANCER CENTER AND RESEARCH INSTITUTE, INC.; SCHOeNBRUNN, Ernst; LAWRENCE, Nicholas, J.; LAWRENCE, Harshani, R.; (257 pag.)WO2016/22460; (2016); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

6940-78-9, The chemical industry reduces the impact on the environment during synthesis 6940-78-9, name is 1-Bromo-4-chlorobutane, I believe this compound will play a more active role in future production and life.

Production Example 1 Synthesis of dihydrate of Compound (I) Methanol (149 L), 7-hydroxy-1H-quinolin-2-one (14.87 kg), and potassium hydroxide (6.21 kg) were mixed in a reaction vessel, and the resulting mixture was stirred. After dissolution, 1-bromo-4-chlorobutane (47.46 kg) was added thereto, and the resulting mixture was stirred under reflux for seven hours. Thereafter, the mixture was stirred at 10 C. for one hour. The precipitated crystal was centrifuged and washed with methanol (15 L). The wet crystal was collected and placed in a tank. Water (149 L) was added thereto, followed by stirring at room temperature. After centrifugation, the result was washed with water (30 L). The wet crystal was collected and placed in a tank. After adding methanol (74 L), the mixture was stirred under reflux for one hour, cooled to 10 C., and then stirred. The precipitated crystal was centrifuged and washed with methanol (15 L). The separated crystal was dried at 60 C. to obtain 7-(4-chlorobutoxy)-1H-quinolin-2-one (15.07 kg).

The chemical industry reduces the impact on the environment during synthesis 1-Bromo-4-chlorobutane. I believe this compound will play a more active role in future production and life.

Reference:
Patent; Sato, Tetsuya; Minowa, Takuya; Hoshika, Yusuke; Toyofuku, Hidekazu; US2015/86632; (2015); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

468075-00-5, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 468075-00-5 name is 2-Bromo-1-chloro-4-(trifluoromethoxy)benzene, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

A suspension of ethyl 2-(3-(2-chloro-5-(trifluoromethoxy)phenyl)-8-methyl-3-azaspiro[5.5]undecan-9-yl)acetate (140 mg, 0.553 mmol), cesium carbonate (540 mg, 1.66 mmol), 2-bromo-1-chloro-4-(trifluoromethoxy)benzene (0.175 ml, 1.105 mmol) and (RuPhos)palladium(II) phenethylamine chloride (40.3 mg, 0.055 mmol) in 1,4-dioxane (3 ml) in amicrowave reaction vial was bubbled with nitrogen. The vial was sealed and the mixture was stirred overnight in an oil bath kept at 100C. The mixture was diluted with aq. NH4Cl solution and extracted 3 times with ethyl acetate. The combined organic layer was washed with brine, dried over MgSO4, filtered and evaporated to dryness. The crude product was purified by chromatography eluting with 0-10%-20% ethyl acetate-hex to give ethyl 2-(3 -(2-chloro-5-(trifluoromethoxy)phenyl)-8-methyl-3-azaspiro[5.5]undecan-9-yl)acetate. LCMS m/z 448.13 [M+H]+.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 2-Bromo-1-chloro-4-(trifluoromethoxy)benzene, and friends who are interested can also refer to it.

Reference:
Patent; MERCK SHARP & DOHME CORP.; CHELLIAH, Mariappan; CHU, Hong Dong; COX, Jason, M.; DEBENHAM, John, S; EAGEN, Keith; LAN, Ping; LONDON, Clare; PLOTKIN, Michael, A.; SHAH, Unmesh; SINZ, Christopher Joseph; SUN, Zhongxiang; VACCARO, Henry, M.; VENKATRAMAN, Skikanth; WO2014/59232; (2014); A2;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

24279-39-8, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 24279-39-8 as follows.

ASE 215 To a refluxing solution of 9.20 g (40.0 mmoles) of 2,6-dichloro-4-trifluoromethylaniline and 0.76 g (4.0 mmoles) of p-toluenesulfonic acid monohydrate in 25 mL of benzene was added dropwise over an 8 hour period with a syringe pump 9.40 mL (9.14 g, 80.1 mmoles) of acetonylacetone. Throughout the addition, water was removed via a Dean-Stark trap. The reaction mixture was then cooled and partitioned with a saturated aqueous solution of NaHCO3 which was back-extracted with ether. The combined organic layers were dried over anhydrous Na2 SO4 concentrated. The residual brown oil was chromatographed on silica gel with a 95:5 v/v hexane-EtOAc eluent to afford 10.0 g (81%) of 1-(2,6-dichloro-4-trifluoromethylphenyl)-2,5-dimethylpyrrole as a light brown solid of melting point 63 C.

According to the analysis of related databases, 2,6-Dichloro-4-(trifluoromethyl)aniline, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Rhone-Poulenc AG Company; US5187185; (1993); A;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

74788-46-8,Some common heterocyclic compound, 74788-46-8, name is 1-(4-Chlorophenyl)propan-1-amine, molecular formula is C9H12ClN, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Example 3: 4-amino-N-Q-(4-chlorophenyl)propyl)-l-(7H-pyrrolo[2.,3-dlpyrimidin-4- yl)piperidine-4-carboxamideO-(7-Azabenzotriazol- 1 -yl)-N,N,N’,N’-tetramethyluronium hexafluorophosphate (0.209 g) was added in one portion to 4-(tert-butoxycarbonylamino)-l-(7H-pyrrolo[2,3- d]pyrimidin-4-yl)piperidine-4-carboxylic acid (Intermediate 1) (0.181 g), l-(4- chlorophenyl)propan-l -amine (0.085 g) and DIPEA (0.262 mL) in DMA (10 mL) at 250C under nitrogen. The resulting solution was stirred at 6O0C for 4 hours. The crude product was purified by ion exchange chromatography, using an SCX column. The desired product was eluted from the column using IN ammonia/MeOH and pure fractions were evaporated to dryness. This crude material was then treated with a 20% solution of TFA in DCM (10 mL) and stirred at room temperature for 2 hours. The crude product was purified by ion exchange chromatography, using an SCX column. The desired product was eluted from the column using IN ammonia/MeOH and pure fractions were evaporated to dryness. This material was purified by preparative LCMS using decreasingly polar mixtures of water (containing 1% ammonia) and MeCN as eluents. Fractions containing the desired compound were evaporated to dryness to afford 4-amino-N-(l-(4-chlorophenyl)propyl)-l- (7H-pyrrolo[2,3-d]pyrimidin-4-yl)piperidine-4-carboxamide as a white solid (0.138 g, 66.8 %).1U NMR (400.13 MHz, DMSOd6) delta 0.87 (3H, t), 1.42 – 1.55 (2H, m), 1.72 – 1.79 (2H, m), 1.91 – 2.05 (2H, m), 2.21 (2H, s), 3.54 – 3.62 (2H, m), 4.38 – 4.45 (2H, m), 4.65 – 4.70 (IH, m), 6.61 (IH, dd), 7.18 (IH, dd), 7.32 – 7.37 (4H, m), 8.31 (IH, d), 8.12 (IH, s). MS m/e MH+ 413.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 74788-46-8, its application will become more common.

Reference:
Patent; ASTRAZENECA AB; ASTRAZENECA UK LIMITED; WO2009/47563; (2009); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics