Chlorides-buliding-blocks

Related Products of 13918-92-8, A common heterocyclic compound, 13918-92-8, name is 2,4-Difluorobenzene-1-sulfonyl chloride, molecular formula is C6H3ClF2O2S, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

(1) 5-Bromo-3-amino-2-chloropyridine (0.10 g, 0.48 mmol), pyridine (0.057 g, 0.72 mmol), and dissolved in dichloromethane (0.77 mL) to prepare reaction solution 1. 2,4-difluorophenylsulfonyl chloride (0.12 g, 0.58 mmol) was used to prepare reaction solution 2. The flow rate (0.5 mL / min) set by the intelligent numerical control sampler was simultaneously introduced into the first via a 500 mum picker tube. Mix in a three-way mixer (ambient temperature 0 C), then flow out under its own pressure, enter a 500 mum inside diameter tube with a set temperature control (25 C), and set the residence time t1 (0.5min). the sulfonamide complete reaction, followed by after-pressure valve to obtain a first effluent;

The synthetic route of 13918-92-8 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Fudan University; Zhuhai Fudan Chuangxin Institute; Ling Yun; Zhou Yaming; Jia Yu; Deng Mingli; Liu Xiaofeng; Yang Yongtai; Chen Zhenxia; (30 pag.)CN110498798; (2019); A;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Synthetic Route of 51572-93-1, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 51572-93-1, name is O-(2,4-Dichlorobenzyl)hydroxylamine hydrochloride belongs to chlorides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

General procedure: A mixture of substituted O-benzylhydroxylamine hydrochloride (1 equiv), TEA (1 equiv) and substituted salicylaldehyde (1 equiv) was dissolved in absolute ethanol and stirred for 0.5 h. The reaction was monitored by TLC. The precipitate was filtered and recrystallized from ethanol to gain salicylaldoxime (compounds 1g-20g).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, O-(2,4-Dichlorobenzyl)hydroxylamine hydrochloride, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Zhao, Ting-Ting; Lu, Xiang; Yang, Xian-Hui; Wang, Li-Ming; Li, Xi; Wang, Zhong-Chang; Gong, Hai-Bin; Zhu, Hai-Liang; Bioorganic and Medicinal Chemistry; vol. 20; 10; (2012); p. 3233 – 3241;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 2533-69-9, name is Methyl 2,2,2-trichloroacetimidate, belongs to chlorides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 2533-69-9, Product Details of 2533-69-9

A solution of 5,6-difluorobenzene-1,2-diamine (1.76 g, 12.2 mmol) in acetic acid (70 ml) was treated with methyl-2,2,2-trichloroacetimidate (1.5 ml, 12.2 mmol) and the resulting solution left to stir at room temperature for 16 hours. The solvent was removed in vacuo and the residue was dissolved in methanol (100 ml) and heated to reflux for 4 hours. The solvent was removed in vacuo and the residue partitioned between saturated aqueous sodium bicarbonate (100 ml) and ethyl actetae (100 ml). The organic phase was separated, dried (sodium sulphate) and reduced in vacuo. Purification by flash column chromatography on silica gel eluting with pentane:ethyl acetate (90:10 changing to 50:50, by volume) gave the title compound as a yellow solid (963 mg).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; Lane, Charlotte Alice Louise; Price, David Anthony; US2006/111416; (2006); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 328-84-7, name is 3,4-Dichlorobenzotrifluoride, This compound has unique chemical properties. The synthetic route is as follows., Safety of 3,4-Dichlorobenzotrifluoride

PRODUCTION EXAMPLE 3 Production of an Intermediate Aniline Compound 5.00 Grams of 5-chloro-2-fluoro-4-mercaptoaniline, 12.2 g of 3,4-dichlorobenzotrifluoride and 4.31 g of potassium carbonate were dissolved in 30 ml of dimethylformamide, and the resulting solution was stirred for 2 hours at a temperature of from 100 to 110 C. in an oil bath. Thereafter, the reaction solution was poured into water and extracted with three 200-ml portions of diethyl ether. The extract obtained was washed with water, dried, filtered and concentrated. The residue obtained was subjected to chromatography on silica gel to obtain 6.57 g of 5-chloro-2-fluoro-4-[2-chloro-4-(trifluoromethyl)phenylthio]aniline. Yield 66% m.p. 80.8 C. 1 H-NMR (CDCl3):

According to the analysis of related databases, 328-84-7, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Sumitomo Chemical Company, Limited; US5116875; (1992); A;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 627-42-9, name is 2-Methoxyethyl chloride, This compound has unique chemical properties. The synthetic route is as follows., Recommanded Product: 627-42-9

A mixture of 4-iodo-1H-pyrazole (10.00 g, 51.553 mmol), 1-chloro-2-methoxyethane (14.62 g, 154.64 mmol), potassium hydroxide (5.78 g, 103.02 mmol), and KBr (610 mg, 5.12 mmol) in ethanol (200 mL) was heated at 100 C. After 16 h, the mixture was concentrated under vacuum, and the resulting residue was purified by silica gel chromatography (95:5 dichloromethane/methanol) to afford 4-iodo-1-(2-methoxyethyl)-1H-pyrazole (12 g, 92%) as a yellow oil. LCMS (ESI): [M+H]+=292.95.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 627-42-9.

Reference:
Patent; Genentech, Inc.; Chan, Bryan; Daniels, Blake; Drobnick, Joy; Gazzard, Lewis; Heffron, Timothy; Huestis, Malcolm; Liang, Jun; Malhotra, Sushant; Mendonca, Rohan; Rajapaksa, Naomi; Siu, Michael; Stivala, Craig; Tellis, John; Wang, Weiru; Wei, BinQing; Zhou, Aihe; Cartwright, Matthew W.; Gancia, Emanuela; Jones, Graham; Lainchbury, Michael; Madin, Andrew; Seward, Eileen; Favor, David; Fong, Kin Chiu; Good, Andrew; Hu, Yonghan; Hu, Baihua; Lu, Aijun; US2018/282328; (2018); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Application of 870-24-6, A common heterocyclic compound, 870-24-6, name is 2-Chloroethanamine hydrochloride, molecular formula is C2H7Cl2N, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

2-(4-Methoxyphenylthio)ethanamine (1) 4-Methoxythiophenol (50 g, 0.357 mol), 2-chloroethylamine monohydrochloride (39.8 g, 0.343 mol.), K2CO3( 78.8 g, 0.57 mol) and diisopropyl ethylamine (32 mL, 0.178 mol) were mixed in 200 mL of THF. The mixture was degassed for 5 min. under reduced pressure and refluxed under argon overnight. The solvent was removed and water (300 mL) was added to the flask. The mixture was extracted with dichloromethane (3 x 200 mL). The organics were collected, dichloromethane was removed and 50 mL conc. HCl was added, followed by 200 mL of water. The solution was extracted with 1:1 EtOAc/hexane (3 x 200 mL). The aqueous layer was adjusted to pH 10 with 2 M NaOH, and was extracted with dichloromethane (3 x 200 mL). The combined organic solution was dried over anhydrous sodium sulfate. Removal of solvent provided 61 g of the target compound as a colorless liquid, with a yield of 97%. 1H-NMR (300 MHz, CDCl3): 7.35(d, J = 8.7 Hz, 2H), 6.81 (d, J= 8.7 Hz, 2H), 3.77 (s, 3H), 2.88-2.80 (m, 4H), 1.44 (s, 2H).

The synthetic route of 870-24-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Les Laboratoires Servier; Armgo Pharma, Inc.; Yan, Jiaming; Belvedere, Sandro; Webb, Yael; Bertrand, Marc; Villeneuve, Nicole; EP2653466; (2013); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 445-13-6, name is 3-Chloro-4-(trifluoromethyl)aniline, belongs to chlorides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 445-13-6, Computed Properties of C7H5ClF3N

Following the procedure of N. Ikemoto et al. (Tetrahedron, 59:1317 (1998)), 3-chloro-4-trifluoromethylaniline (890 mg, 4.6 mmol, Ryan Scientific) in CH3CN (37 mL) was added to a 250 mL round-bottomed flask. The flask was cooled in an ice bath, and HOAc (3.7 mL) and HCl (12 M, 1.8 mL) were added. Sodium nitrite (380 mg, 5.5 mmol, Aldrich) in 0.77 mL of H2O was added in 0.15 mL portions every 2 min until all of the solution had been added (total time ca. 9 min). After 25 min, sulfur dioxide (Aldrich) was bubbled into the reaction mixture for 1.25 h. Copper(II)chloride (780 mg, 5.8 mmol, Aldrich) in 1.5 mL of water was then added to the reaction mixture. Gas evolution occurred, and the reaction was warmed to RT and stirred overnight. After the lower boiling solvents were removed in vacuo, water was added, and the mixture was extracted with CH2Cl2 (3¡Á). The combined organic layers were washed with water, dried over MgSO4, filtered and concentrated in vacuo to give the crude material as a brownish oil with solid in it. The compound did not ionize well, but an aliquot, when treated with propylamine, provided the propylarylsulfonamide adduct with a ESI-MS, -ion, m/z=300.2 (M-1).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 3-Chloro-4-(trifluoromethyl)aniline, and friends who are interested can also refer to it.

Reference:
Patent; Amgen Inc.; Array Biopharma, Inc.; US2005/234044; (2005); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Reference of 172921-33-4,Some common heterocyclic compound, 172921-33-4, name is 1-Bromo-4-chloro-2,5-difluorobenzene, molecular formula is C6H2BrClF2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a solution of 1-bromo-4-chloro-2,5-difluorobenzene (200 mg, 0.879 mmol) in THF (10 mL) cooled to -10¡ãC was added isopropylmagnesium bromide (1M in THF, 1.055 mL, 1.055 mmol) dropwise and the reaction mixture was stirred at this temperature for 1 h. The reaction mixture was then warmed to 0 ¡ãC and stirred for another 1 h. The resultant mixture was again cooled to -10 ¡ãC and treated dropwise with a solution of 2-isopropoxy-4,4,5,5-tetramethyl-1,3,2-dioxaborolane (196 mg, 1.055 mmol). The reaction mixture was allowed to warm up to room temperature and treated with a saturated solution of ammonium chloride (3 mL). The layers were separated and aqueous layer was extracted with dichloromethane (2×2 mL). The combined organic layer was dried over sodium sulfate, filtered and concentrated under reduced pressure to afford crude compound which was purified by column chromatography on a silica (7:3 – Ethyl acetate:hexane) to afford 2-(4-chloro-2,5-difluorophenyl)-4,4,5,5-tetramethyl-1,3,2-dioxaborolane (150 mg, 0.546 mmol, 62percent yield) as an oil.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 1-Bromo-4-chloro-2,5-difluorobenzene, its application will become more common.

Reference:
Patent; Bristol – Myers Squibb Company; Vivekanand, M.Burda; Pan, Senrian; Ramkumar, Rajamani; Sushil, Jetanand Nara; Maheswaran, Shibasanban Calatrava; Tarun Kumar, Meishar; Jonathan, L. Ditta; Carolyn, Diane Jiaba; John, J. Bronson; John, E. Maco; (232 pag.)JP2015/528018; (2015); A;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Related Products of 29671-92-9, A common heterocyclic compound, 29671-92-9, name is Carbamimidic chloride hydrochloride, molecular formula is CH4Cl2N2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Example 306 Synthesis of 2-aminothieno[2,3-d]pyrimidin-4(3H)-one A mixture of ethyl 2-aminothiophene-3-carboxylate (0.5 g, 3.18 mmol), chloroformamidine hydrochloride (0.91 g, 7.95 mmol) and dimethylsulfone (1.50 g, 15.9 mmol) was heated at 120-130 C. for 30 minutes. After cooling down to room temperature, water (10 ml) was added and ammonium hydroxide was used to neutralize the suspension. The solid was filtered off, washed with water and dried. The crude residue was purified by flash chromatography on silica gel (CH2Cl2/MeOH 10:1) to yield the title compound as a white solid (0.24 g, 45%). 1H NMR (300 MHz, DMSO, 25 C.): delta=10.89 (s, 1H, NH), 7.09 (d, J=5.8 Hz, 1H, CH), 6.97 (d, J=5.8 Hz, 1H, CH), 6.52 (s, 2H, NH2) ppm. HRMS: calcd for C6H6N3OS 168.02316. found 168.02239.

The synthetic route of 29671-92-9 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Katholieke Universiteit Leuven, K.U. Leuven R&D; Herman, Jean; Louat, Thierry; US2014/88088; (2014); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 13726-14-2 as follows. Product Details of 13726-14-2

To a solution of 4-chloro-3-methoxyaniline (50 g, 3 i 7 mmol) and DIPEA (i iO mE, 635 mmol) in CH2C12 (700 mE) was added acetic anhydride (36 mE, 38i mmol) drop wise at 00 C. and the reaction mixture was stirred at room temperature for 3 h. The reaction then was quenched with water (250 mE) and the organic layer was separated. The aqueous layer was extracted with CH2C12 (iOO mEx3). The combined organic layers were dried (Na2504), concentrated and purified by flash chromatography with CH2C12/MeOH to give N-(4-chloro-3-methoxy phenyl)acetamide (7i g, quantitative yield) as a white solid.

According to the analysis of related databases, 13726-14-2, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Forma Therapeutics, Inc.; Lin, Jian; Ericsson, Anna; Campbell, Ann-Marie; Gustafson, Gary; Wang, Zhongguo; Diebold, R. Bruce; Ashwell, Susan; Lancia, Jr., David R.; Caravella, Justin Andrew; Lu, Wei; (57 pag.)US2016/311818; (2016); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics