Chlorides-buliding-blocks

These common heterocyclic compound, 6781-98-2, name is 2-Chloro-1,3-dimethylbenzene, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Safety of 2-Chloro-1,3-dimethylbenzene

General procedure: To a 50 mL Schlenk tube containing base (1.5 mmol) and precatalyst 4a (1 mol percent, 0.0083 g) purged with N2 (three times), amine (1.2 mmol) was added via syringe, and the resulted mixture was allowed to stir at room temperature for 2?3 min. Solvent (1 mL) was then injected via syringe followed by the aryl chloride (1.0 mmol). If the aryl chloride was a solid, it was introduced into the vial prior to purging with N2. At this time, the reaction was stirred for 24 h at 100 °C. After cooling to the room temperature, the reaction mixture was concentrated in vacuo and directly purified via silica gel flash chromatography. 2,6-Dimethyl-N-(o-tolyl)aniline (17) ;1H NMR (CDCl3, 400 MHz, 298 K): delta=7.28-7.22 (m, 4H), 7.15-7.05 (m, 1H), 6.88-6.80 (m, 1H), 6.33-6.25 (m, 1H), 5.04 (br s, 1H), 2.46 (s, 3H), 2.33 (s, 6H); 13C NMR (CDCl3, 100 MHz, 298 K): delta=114.05, 138.67, 135.46, 130.18, 128.48, 126.86, 125.48, 122.32, 118.03, 111.64, 18.16, 17.58.

The synthetic route of 2-Chloro-1,3-dimethylbenzene has been constantly updated, and we look forward to future research findings.

Reference:
Article; Fang, Weiwei; Jiang, Jian; Xu, Yong; Zhou, Juefei; Tu, Tao; Tetrahedron; vol. 69; 2; (2013); p. 673 – 679;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Some common heterocyclic compound, 29671-92-9, name is Carbamimidic chloride hydrochloride, molecular formula is CH4Cl2N2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. SDS of cas: 29671-92-9

2-Amino-5-chloro-3,9-dihydro-4H-pyrimido[4,5-b]indol-4-one (8) 1 g methyl sulfone was heated to melting. 7 (106.22 mg, 1.37 mmol) was added and the resulting mixture was stirred and heated at 110-120 C. to dissolve completely. 5 (200 mg, 0.837 mmol) was added in one part to the reaction mixture. Stirring was continued for 30 minutes. About 10 mL water was added to quench the reaction. Ammonia water was added to neutralize the reaction mixture. Solid precipitated out. This solid was filtered. Obtained solid was dissolved in chloroform and methanol, dried (using Na2SO4) and recrystallized.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 29671-92-9, its application will become more common.

Reference:
Patent; Gangjee, Aleem; US2009/62318; (2009); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Electric Literature of 932-96-7, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 932-96-7, name is 4-Chloro-N-methylaniline belongs to chlorides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

4-Chloro-N-methylaniline (1.6 mL, 12.9 mmol) in toluene (44 mL) was added to a mixture of Cs2CO3 (4.9 g, 15.05 mmol), Pd(OAc)2 (0.121 g, 0.538 mmol), BINAP (0.502 g, 0.806 mmol) and 5-bromopicolinaldehyde (2.00 g, 10.75 mmol). The mixture was stirred at 85 C. for 15 h and after cooling filtered through Celite. The solids were washed with EtOAc. The combined filtrates were concentrated and the residue purified by chromatography to give the sub-title compound. Yield: 1.537 g (58%).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 4-Chloro-N-methylaniline, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Nilsson, Peter; Pelcman, Benjamin; Katkevics, Martins; Ronn, Robert; Krog-Jensen, Christian; US2013/35358; (2013); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Electric Literature of 367-22-6,Some common heterocyclic compound, 367-22-6, name is 4-Chloro-3-fluoroaniline, molecular formula is C6H5ClFN, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: Compound 7 (488.2 mg, 2.0 mmol), 3,4-dimethoxybenzenamine 8a (367.6 mg, 2.4 mmol), and p-toluenesulfonic acid monohydrate (304.4 mg, 1.6 mmol) were dissolved in n-butanol (20 mL), then refluxed at 130 oC for 12 h. The resulting solution was neutralized with saturated NaHCO3 (5 mL). The mixture was extracted with ethyl acetate (50 mL×3). The organic layer was combined, dried over anhydrous Na2SO4, concentrated. The crude product was purified by silica gel chromatography to afford 9a (319.7 mg, 44.3% yield).

The synthetic route of 367-22-6 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Long, Liang; Luo, Yu; Hou, Zhi-Jie; Ma, Hua-Juan; Long, Zi-Jie; Tu, Zheng-Chao; Huang, Lin-Jie; Liu, Quentin; Lu, Gui; European Journal of Medicinal Chemistry; vol. 145; (2018); p. 805 – 812;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Application of 1939-99-7, A common heterocyclic compound, 1939-99-7, name is Phenylmethanesulfonyl chloride, molecular formula is C7H7ClO2S, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A solution of phenylmethanesulfonyl chloride (2.19 g, 10 mmol) was added into a suspension of 3-bromopropan-l-amine hydrobromide (2.19 g, 10 mmol) and Et3N (2.02 g, 20 mmol) in THF (50 mL) at 0 C. The mixture was stirred at 0 C for 5 min. TLC confirmed the completion of reaction. Solid was filtered out with suction, and the filtrate was concentrated to provide compound N-(3- bromopropyl)(phenyl)methanesulfonamide (2.7 g, quant.) as a pale yellow solid which was used in the next step without further purification. lU NMR (300 MHz, CDC13) delta 7.40 (m, 5H), 4.48 (m, 1H), 4.27 (s, 2H), 3.41 (t, J = 6.6 Hz, 2H), 3.16 (q, 2H), 2.01 (m, 2H). LCMS (ESI), m/z, 314 and 316 [M+Na]+, Br pattern found.

The synthetic route of 1939-99-7 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; GENENTECH, INC.; FAUBER, Benjamin; GANCIA, Emanuela; LADDUWAHETTY, Tammy; VESEY, David; WINSHIP, Paul; RENE, Olivier; (168 pag.)WO2017/5900; (2017); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Reference of 15205-11-5, These common heterocyclic compound, 15205-11-5, name is 2-Chloro-4-fluorobenzylamine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Example 91 N-[(2-chloro-4-fluorophenyl)methyl]-5-oxo-1-phenyl-prolinamide (E91) 5-oxo-1-phenyl-proline (0.072 g, 0.35 mmol, prepared as described below) was dissolved in dichloromethane (~2 ml) and dimethylformamide (0.5 ml) and to this was added N-(3-dimethylaminopropyl)-N’-ethylcarbodiimide hydrochloride (0.081 g, 0.42 mmol), 1-hydroxybenzotriazole (0.057 g, 0.42 mmol), and N-ethyl morpholine (0.134 ml, 1.05 mmol). The mixture was stirred at room temperature for 30 minutes and then [(2-chloro-4-fluorophenyl)methyl]amine (0.067 g, 0.42 mmol) was added. Stirring was continued overnight at room temperature and then the mixture was diluted with more dichloromethane and saturated aqueous sodium hydrogen carbonate. The aqueous layer was separated and extracted with more dichloromethane (3 aliquots). The combined organic layers were then washed with brine before drying over magnesium sulphate. Evaporation of the solvent then gave a yellow oil which was purified by mass-directed automated HPLC. Finally trituration of the material thus obtained with a 1:1 mixture of dichloromethane and diethyl ether gave, after filtration and drying, pure N-[(2-chloro-4-fluorophenyl)methyl]-5-oxo-1-phenyl-prolinamide (0.031 g) as a white solid. LC/MS [M+H]+=347, retention time=2.46 minutes.

The synthetic route of 15205-11-5 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; GLAXO GROUP LIMITED; US2008/9541; (2008); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 13918-92-8, name is 2,4-Difluorobenzene-1-sulfonyl chloride, belongs to chlorides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 13918-92-8, Recommanded Product: 13918-92-8

a) N-[5 -bromo-2-(methyloxy)-3-pyridinyl] -2,4-difluorobenzenesulfonamide. To a cooled (0 0C) solution of 5-bromo-2-(methyloxy)-3-pyridinamine (100 mmol) in pyridine (200 rnL) was added slowly 2,4-difluorobenzenesulfonyl chloride (100 mmol) over 15 min (reaction became heterogeneous). The ice bath was removed and the mixture was stirred at ambient temperature for 16 h, at which time the reaction was diluted with water (500 mL) and the solids filtered off and washed with copious amounts of water. The precipitate was dried in a vacuum oven at 500C to give the title product as an ivory solid (32 % yield). MS(ES) m/e 380.9, 379.0 (M + H)+.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2,4-Difluorobenzene-1-sulfonyl chloride, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; SMITHKLINE BEECHAM CORPORATION; WO2009/39140; (2009); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 13078-79-0, name is 2-(3-Chlorophenyl)ethanamine, belongs to chlorides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 13078-79-0, Computed Properties of C8H10ClN

F. 4-Chloro-2-((3-chlorophenethyl)amino)pyrimidine-5-carbonitrile A mixture of 2,4-dichloropyrimidine-5-carbonitrile (5.0 g, 28.90 mmol), 2-(3-chlorophenyl)ethanamine (4.78 g, 28.9 mmol) and DIEA (7.45 g, 57.8 mmol) in THF (50 mL) was stirred at 50 C. for 3 h. After cooling to room temperature, water (80 mL) was added and the aqueous layer was extracted with ethyl acetate (3*100 mL). The combined organic layers were washed with saturated aqueous ammonium chloride, brine, dried over anhydrous sodium sulfate and filtered. The filtrate was evaporated in vacuum to give the crude product, which was treated with ethyl acetate (30 mL) and stirred for 30 min. The mixture was filtered and dried to afford the title compound (3.20 g, 10.92 mmol, 38% yield). MS (ESI) m/z 293.1, 294.1 [M+H]+.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-(3-Chlorophenyl)ethanamine, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Papa, Patrick; Cathers, Brian Edwin; CALABRESE, Andrew Antony; WHITEFIELD, Brandon Wade; BENNETT, Brydon; CASHION, Daniel; MORTENSEN, Deborah; HUANG, Dehua; TORRES, Eduardo; PARNES, Jason; SAPIENZA, John; HANSEN, Joshua; LEFTHERIS, Katerina; CORREA, Matthew; DELGADO, Maria Mercedes; RAHEJA, Neil; BAHMANYAR, Sami; HEGDE, Sayee; NORRIS, Stephen; PLANTEVIN-KRENITSKY, Veronique; US2015/175557; (2015); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Application of 2845-89-8, These common heterocyclic compound, 2845-89-8, name is 1-Chloro-3-methoxybenzene, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: Under a N2 atmosphere, KOtBu (102.1 mg, 1.3 equiv) and a so-lution of complex 3a (10e50 mL, 0.01e0.05 mol%, prepared from4.6 mg of complex 3a in 1.0 mL dichloromethane) were added into aSchlenk reaction tube. The tube was sealed and the solvent wasremoved under reduced pressure. Then toluene (0.5 mL), amines(0.84 mmol) and aryl chlorides (0.70 mmol) were successivelyadded. The mixture was stirred vigorously at the specied tem-perature for 3e24 h. Then the solvent was removed under reducedpressure and the residue was puried by ash column chroma-tography (SiO2) to give the corresponding products.

The synthetic route of 2845-89-8 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Zhang, Zhi-Mao; Gao, Yu-Jue; Lu, Jian-Mei; Tetrahedron; vol. 73; 52; (2017); p. 7308 – 7314;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 1127-85-1, name is 2,4-Dichloro-5,6,7,8-tetrahydroquinazoline belongs to chlorides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below. name: 2,4-Dichloro-5,6,7,8-tetrahydroquinazoline

2,4-Dichloro-5,6,7,8-tetrahydroquinazoline(103 mg, 0.640 mmol) and K2CO3 (265 mg, 1.92 mmol) were dissolved in DMF (3.2 ml), and then 3-fluorobenzenethiol (110 mg, 0.767 mmol) was slowly added dropwise and stirred at room temperature for 2 hours .After confirming the termination of the reaction, the reaction solution was diluted with dichloromethane and extracted several times with distilled water. The separated organic layer was dried over anhydrous MgSO4, filtered under reduced pressure, and concentrated.The concentrated filtrate was separated and purified by silica gel column chromatography (Hex: EtOAc = 18: 1) and purified to obtain the desired compound (181 mg, 96%) as a white solid.

The synthetic route of 1127-85-1 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; KOREA INSTITUTE OF SCIENCE AND TECHNOLOGY; Nam, Ghil-Soo; Choo, Hyun-Ah; Choi, Kyung-Il; (40 pag.)KR101730790; (2017); B1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics