Chlorides-buliding-blocks

Electric Literature of 328-72-3, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 328-72-3, name is 3,5-Bis(trifluoromethyl)chlorobenzene belongs to chlorides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

Example 10 Synthesis of 3,5-bis(trifluoromethyl)cinnamide (Method II) 0.181 g (2.55 mmol) of acrylamide, 9.7 mg (30 mumol) of NBu4Br, 0.675 mg (3 mumol) of palladium acetate and 2.67 mg (12 mumol) of phenyldi(t-butyl)phosphine are weighed into a Schlenk vessel. 0.542 g (3 mmol) of 3,5-bis(trifluoromethyl)chlorobenzene and 0.637 ml (3 mmol) of dicyclohexylmethylamine and also 2.5 ml of dimethylacetamide are then added. The Schlenk vessel is placed in a heating bath at 130 C. and the contents are stirred. After 3 hours, the yield is determined by means of HPLC: 99% (TON=723, TOF=241/h).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 3,5-Bis(trifluoromethyl)chlorobenzene, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Rampf, Florian; Eckert, Markus; US2003/105353; (2003); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Synthetic Route of 15205-11-5,Some common heterocyclic compound, 15205-11-5, name is 2-Chloro-4-fluorobenzylamine, molecular formula is C7H7ClFN, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Example 173; lambda/-[(2-chloro-4-fluorophenyl)methyl]-2-[1-(2-hydroxyethyl)-5- (trifluoromethyl)-1 H-pyrazol-4-yl]acetamide (E173) Crude [1-(2-hydroxyethyl)-5-(trifluoromethyl)-1 H-pyrazol-4-yl]acetic acid (6.0 g, -6.52 mmol, prepared as described below) was suspended in dimethylformamide (8 ml) and to this was added water soluble carbodiimide (1.5 g, 7.82 mmol), 1- hydroxybenzotriazole (1.06 g, 7.82 mmol), N-ethyl morpholine (2.49 ml, 19.56 mmol), and [(2-chloro-4-fluorophenyl)methyl]amine (1.25 g, 7.82 mmol). The mixture was stirred at room temperature overnight and then partitioned between ethyl acetate (50 ml) and water (50 ml). The organic phase was separated and washed with more water (2 x 20 ml), dried over anhydrous sodium sulphate, filtered, and concentrated to an orange oil. This material was purified by automated flash-silica column chromatography (Biotage SP4), eluting with 0-100% ethyl acetate in hexane, to give lambda/-[(2-chloro-4-fluorophenyl)methyl]-2-[1-(2-hydroxyethyl)-5-(trifluoromethyl)-1 H- pyrazol-4-yl]acetamide as a sticky white solid (~1 g). LC/MS [M+H]+ = 381 , retention time = 2.47 minutes.

The synthetic route of 15205-11-5 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; GLAXO GROUP LIMITED; WO2008/138876; (2008); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 4863-91-6, name is 3-Chloro-5-fluoroaniline, belongs to chlorides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 4863-91-6, Application In Synthesis of 3-Chloro-5-fluoroaniline

EXAMPLE A-12 N-(3-chloro-5-fluorophenyl)-N’-t-pentylthiourea A solution of 8.5 g of 3-chloro-5-fluoroaniline in 150 ml of benzene was refluxed. To the solution was added 2.2 g of thiophosgene in 10 ml of benzene dropwise with stirring. The mixture was stirred at the same temperature for 3 hours, cooled to room temperature and filtered to remove insoluble matter. The filtrate was evaporated in vacuo and filtered again to remove insoluble matter. The filtrate was evaporated in vacuo. The residue was purified by silica gel column chromatography using n-hexane as a solvent. The resulting oil was dissolved in 30 ml of benzene and reacted with 3.4 g of t-pentylamine with stirring at room temperature for 30 minutes. The reaction mixture was evaporated in vacuo and the resulting solid recrystallized from cyclohexane to give 2.2 g of the title compound as colorless needles melting at 116.0-117.5 C. NMR (DMSO-d6, delta ppm): 0.82 (3H, t), 1.42 (6H, s), 1.93 (2H, q), 7.0-7.1 (1H, m), 7.4-7.7 (3H, m), 9.58 (1H, bs).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 3-Chloro-5-fluoroaniline, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Kanebo, Ltd.; US5087640; (1992); A;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

These common heterocyclic compound, 367-22-6, name is 4-Chloro-3-fluoroaniline, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. name: 4-Chloro-3-fluoroaniline

General procedure: To a solution of compound 12 (bakuchiol-o-triflate) (1 mmol) in toluene (10 mL M), amine (3.0 mmol), Cs2CO3 (4.0 mmol), ligand (±) BINAP (0.6 mol) and Pd(OAc)2 (0.2 mol) were added under an inert atmosphere. The reaction mixture was degassed at RT and refluxed (120 C) for 24 hr. Then, the reaction mixture was brought to RT, diluted with EtOAc and filtered through celite. To the reaction mixture, brine (20 mL) was added and extracted with EtOAc (2 × 10 mL). The combined organic layerwas dried over anhydrous MgSO4, filtered and concentrated in vacuo to afford the product after silicagel chromatography purification (Hex/EtOAc, 9.5:0.5).

The synthetic route of 4-Chloro-3-fluoroaniline has been constantly updated, and we look forward to future research findings.

Reference:
Article; Gautam, Lekh Nath; Ling, Taotao; Lang, Walter; Rivas, Fatima; European Journal of Medicinal Chemistry; vol. 113; (2016); p. 75 – 80;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 918538-05-3, name is 2,4-Dichloropyrrolo[2,1-f][1,2,4]triazine, This compound has unique chemical properties. The synthetic route is as follows., Computed Properties of C6H3Cl2N3

General procedure: Compound 183a was prepared from tert-butyl 2,4-dichloro-5,6-dihydropyrido[3,4- d]pyrimidine-7(8H)-carboxylate (182a) (1.0 g, 3.29 mmol) in 2-Propanol (15 mL) using DIPEA (2.3 mL, 13.15 mmol) and 1-(3,4,5-trimethoxyphenyl)-1H-imidazol-4-amine (57a) (0.98 g, 3.95 mmol). This gave after workup and purification by flash column chromatography [silica gel, (12 g) eluting with DMA-80 in DCM (0 to 80%)] fert-butyl 2-chloro-4-((l-(3,4,5- trimethoxyphenyl)-lH-imidazol-4-yl)amino)-5,6-dihydropyrido[3,4-d]pyrimidine-7(8H)- carboxylate (183a) (0.87 g, 51 % yield) as a buff solid; NMR (300 MHz, DMSO-^e) delta 9.65 (s, 1H, D20 exchangeable), 8.16 (d, J = 1.5 Hz, 1H), 7.78 (d, J = 1.6 Hz, 1H), 6.90 (s, 2H), 4.35 (s, 2H), 3.87 (s, 6H), 3.69 (s, 3H), 3.61 (t, J = 5.8 Hz, 2H), 2.69 – 2.60 (m, 2H), 1.43 (s, 9H).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 918538-05-3.

Reference:
Patent; BIOCRYST PHARMACEUTICALS, INC.; KOTIAN, Pravin, L.; BABU, Yarlagadda, S.; KUMAR, V., Satish; ZHANG, Weihe; LU, Peng-Cheng; RAMAN, Krishnan; (747 pag.)WO2018/232094; (2018); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

These common heterocyclic compound, 363-51-9, name is 2-Chloro-6-fluoroaniline, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. HPLC of Formula: C6H5ClFN

Example 4b N-(2′-Chloro-6′-fluoro-phenyl)-4-methylaniline A solution of 3.91 g 2-chloro-6-fluoroaniline in 4 nm of tetrahydrofuran and 35 ml of chlorobenzene is cooled down to -40 to -45 C. At this temperature, 5.09 g of titanium tetrachloride is added to the solution, followed by the addition of 5.0 g of 1-Methoxy-4-methylcyclohexa-1,4-diene. The reaction mixture is allowed to warm up to approx. -35 C. and stirred for 2 hours at this temperature. A solution of 10.18 g of iodine in 20 ml of tetrahydrofuran and 2.3 ml of acetic acid is then added drop-wise to the reaction mixture and the temperature was allowed to warm up to 0 C. The mixture was stirred for 1 hour at 0 C. and 16 hours at 25 C. Then 3.4 g of iodine is added to the reaction mixture and stirring is continued for additional 24 hours at 25 C. The reaction is finally quenched by pouring the reaction mixture onto a mixture of 250 ml of aeq. Sodium bisulfite (38-40%) and 400 ml of saturated aeq. sodium carbonate. The aqueous phase is extracted with ethyl acetate (1*200 ml and 2*100 ml), the ethyl acetate phases are unified and washed with 100 ml of water. The organic phase was dried over anhydrous sodium sulfate and evaporated in vacuo to give a yellow viscous liquid. The liquid was dissolved in hexane/t-butyl-methylether and the solution was filtered over silica gel to obtain, after evaporation of the solvent, 4.33 g of crude product. The product can be used directly in the next step. Alternatively, it can be purified e.g. by column chromatography on silica gel with hexane/t-butyl-methylether (9:1) as eluent to yield pure N-(2-Chloro-6′-fluoro-phenyl)-4-methylaniline. 1H-NMR (DMSO-d6, 500 MS, 300K) delta 2.17 (s, 3H, CH3); 6.53 [dd, J=8.5 Hz, JH-F=1.5 Hz, 2H, HC (2) and HC (6)], 6.94 [d, J=8.0 Hz, 2H HC (3) and HC (5)], 7.16 [ddd, J=8.0 Hz, JH-F=6.0 Hz, 1H, HC (4′)], 7.25 [ddd, J=8.0, 1.5 Hz, JH-F=8.0, 1H, HC (5′)]; 7.34 [ddd, J=8.0, 1.5 Hz, JH-F, 1.5, 1H, HC (3′)]; 7.63 (s, 1H, NH). MS (EI) m/z 235 (100, M+), 200 (35, (M-Cl)+), 185 (55)

The synthetic route of 2-Chloro-6-fluoroaniline has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Acemoglu, Murat; Allmendinger, Thomas; Calienni, John Vincent; Cercus, Jacques; Loiseleur, Olivier; Sedelmeier, Gottfried; Xu, David; US2008/249318; (2008); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Related Products of 54932-72-8, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 54932-72-8 name is 4-Bromo-1-chloro-2-methylbenzene, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

A mixture of 4-bromo-l-chloro-2-methylbenzene (5.Og, 24.0 mmol), N- bromosuccinimide (4.4 g, 25.0 mmol), and benzoyl peroxide (700 mg, 2.9 mmol) in anhydrous carbon tetrachloride (85 mL) was stirred at reflux for 4 hours. Dichloromethane (50 mL) was added. The mixture was extracted with 1 N NaOH (1 x 150 mL) and brine (1 x 150 mL). The organic extract was recovered, dried over MgSO4, filtered, evaporated, and dried in vacuo. The crude product was purified by flash chromatography (0-5% EtOAc/hexanes), affording 4-bromo-2-(bromomethyl)- 1-chlorobenzene (4.76 g, 70% yield). The product was used without further purification.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 4-Bromo-1-chloro-2-methylbenzene, and friends who are interested can also refer to it.

Reference:
Patent; CHLORION PHARMA, INC.; UNIVERSITE LAVAL; ATTARDO, Giorgio; TRIPATHY, Sasmita; WO2010/132999; (2010); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Electric Literature of 174913-12-3, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 174913-12-3 name is 1-Bromo-3-chloro-5-methoxybenzene, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

Step 2: 1 -Bromo-2,3-dichloro-5-methoxybenzene. To a solution of 1 -bromo-3-chloro-5-methoxybenzene (300 mg, 1 .35 mmol, 1 equiv.) in DMF (5 ml_) was added trichloro-1 ,3,5-triazinane-2,4,6-trione (1 15 mg, 0.49 mmol, 0.36 equiv.) and the reaction was stirred at 50 C for 3 h. The reaction mixture was concentrated and the crude product was purified by column chromatography (Heptane/EtOAc 100 %? 20: 1) to afford the desired product as a white solid (253 mg, 73 %). LCMS [M+H]+ 254; 1 H NMR (400 MHz, CD3CI) delta 7.09 (1 H, d, J = 3.0 Hz), 6.97 (1 H, d, J = 3.0 Hz), 3.77 (3H , s).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 1-Bromo-3-chloro-5-methoxybenzene, and friends who are interested can also refer to it.

Reference:
Patent; THOMAS HELLEDAYS STIFTELSE FOeR MEDICINSK FORSKNING; SCOBIE, Martin; WALLNER, Olov; KOOLMEISTER, Tobias; VALLIN, Karl Sven Axel; HENRIKSSON, Carl Martin; HOMAN, Evert; HELLEDAY, Thomas; JACQUES, Sylvain; DESROSES, Matthieu; JACQUES-CORDONNIER, Marie-Caroline; FISKESUND, Roland Julius Yu; (359 pag.)WO2015/187089; (2015); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Application of 2533-69-9, A common heterocyclic compound, 2533-69-9, name is Methyl 2,2,2-trichloroacetimidate, molecular formula is C3H4Cl3NO, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: Preparation of 2-methyl-6-nitro-2H-indazole (5d). To a stirred mixture of 6-nitro-1H-indazole (1.0 g, 0.0061 mmol) in dichloromethane (25.0 mL) was added trifluoromethanesulfonic acid (0.54 mL, 0.0061 mmol), stirred for 5-10 min at 25-35 C. To this mixture was added methyl 2,2,2,-trichlroacetimidate (2.69 g, 0.015 mmol) at room temperature. The reaction mixture was stirred at room temperature for 16-18 h under N2. After reaction completion, chilled saturated NaHCO3 solution was added. The aqueous and organic phases were separated. Aqueous phase was extracted with dichloromethane 10 mL. Combined organic layers were washed with DM water (2 × 10 mL). Organic layer was dried over anhydrous Na2SO4, filtered, and evaporated completely under vacuum to obtain 2-methyl-6-nitro-2H-indazole (1.03 g, 95.0%) as a yellow solid.

The synthetic route of 2533-69-9 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Baddam, Sudhakar Reddy; Uday Kumar; Panasa Reddy; Bandichhor, Rakeshwar; Tetrahedron Letters; vol. 54; 13; (2013); p. 1661 – 1663;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 104-11-0, name is 1-(4-Chlorophenyl)-N-methylmethanamine, belongs to chlorides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 104-11-0, Quality Control of 1-(4-Chlorophenyl)-N-methylmethanamine

General procedure: A solution of 0.17g (1.40mmol) of N-benzylmethylamine, 0.20g (1.40mmol) of K2CO3 and 0.40g of (R,S)-3(4-bromobutyl)-5-phenyloxazolidin-2-one 23 in ACN was allowed to stirring under reflux for 6-12h and monitored by TLC until the reaction was completed. The hot solution was filtered and concentrated in vacuo to afford 0.29g (85.0mmol) of a chromatography pure yellow oil 2a.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1-(4-Chlorophenyl)-N-methylmethanamine, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Zampieri, Daniele; Vio, Luciano; Fermeglia, Maurizio; Pricl, Sabrina; Wuensch, Bernhard; Schepmann, Dirk; Romano, Maurizio; Mamolo, Maria Grazia; Laurini, Erik; European Journal of Medicinal Chemistry; vol. 121; (2016); p. 712 – 726;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics