Chlorides-buliding-blocks

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 39065-95-7, name is 4-(Chlorodifluoromethoxy)aniline, A new synthetic method of this compound is introduced below., Quality Control of 4-(Chlorodifluoromethoxy)aniline

To a solution of (R)-9-bromo-4-hydroxy1,2,3,4-tetrahydrobenzo[4,5]imidazo[1,2-a]pyridine-7-carboxylic acid (38d, 30 mg, 0.096 mmol) in DMF (2 mL) was added HATU (54.99 mg, 0.145 mmol), DIEA (124.62 mg, 0.964 mmol, 167.95 uL) and 4-[chloro(difluoro)methoxy]aniline (1h, 28.00 mg, 0.145 mmol). The mixture was stirred at 15 C. for 16 hr. TLC (ethyl acetate_methanol=10:1, Rf=0.3) indicated a new spot was generated. LCMS showed a peak with desired MS was detected. The mixture was quenched with water (20 mL) and the mixture was extracted with ethyl acetate (30 mL*3). The combined organic layers were washed with brine (20 mL), dried over anhydrous Na2SO4, filtered and concentrated in vacuo. The crude product was purified by prep-TLC (ethyl acetate_methanol=10:1, Rf=0.3) to give 38e as a yellow solid.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Terns, Inc.; ROMERO, F. Anthony; KIRSCHBERG, Thorsten A.; HALCOMB, Randall; XU, Yingzi; (144 pag.)US2020/87283; (2020); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Electric Literature of 16793-91-2,Some common heterocyclic compound, 16793-91-2, name is 2-Chlorophenethyl Bromide, molecular formula is C8H8BrCl, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Example 14: Preparation of 8-[2-(2-chlorophenyl)ethyl]-3-methyl-4-({4-[3-(trifluoromethyl)phenyl]piperazin-1-yl}carbonyl)-1-oxa-8-azaspiro[4.5]dec-3-en-2-one [Show Image] A mixture of 3-methyl-4-({4-[3-(trifluoromethyl)phenyl]piperazin-1-yl}carbonyl)-1-oxa-8-azaspiro[4.5]dec-3-en-2-one dihydrochloride (Example 1 , 200 mg, 0.40 mmol), anhydrous potassium carbonate (180 mg, 1.30 mmol) and 1-(2-bromo-ethyl)-2-chlorobenzene (0.07 mL, 0.22 mmol) in anhydrous N,N-dimethylformamide (3 mL) was heated at 90C for 1.5 hours under microwave irradiation. The reaction mixture was concentrated under vacuum. The residue was taken up in dichloromethane (20 mL), washed with water (20 mL) and brine (20 mL), dried (MgSO4) and concentrated under vacuum. After purification by flash chromatography (silica), the title compound was obtained as a white solid (76 mg, 34%). 1H NMR (DMSO-d6, 400 MHz): delta 7.46-7.34 (m, 3H), 7.26-7.23 (m, 4H), 7.11 (d, J = 7.5 Hz, 1 H), 3.80-3.79 (m, 1H), 3.68-3.69 (m, 1H), 3.56 (s, 2H), 3.27 (s, 1H), 3.16-3.15 (m, 2H), 2.93-2.92 (m, 1H), 2.87-2.83 (m, 4H), 2.53 (s, 2H), 2.25-2.24 (m, 3H), 1.88-1.87 (m, 1H), 1.76 (s, 3H), 1.72 (s, 1H), 1.52 (s, 1H). LCMS (Method D): Mass found (M+ 562), Rt (min): 4.64, Area (%): 99.5 (Max), 99.6 (254 nm). HPLC (Method A): Rt (min): 4.61, Area (%): 98.5 (Max), 99.3 (254 nm).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 2-Chlorophenethyl Bromide, its application will become more common.

Reference:
Patent; Ares Trading SA; EP2508526; (2012); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Synthetic Route of 38762-41-3, A common heterocyclic compound, 38762-41-3, name is 4-Bromo-2-chloroaniline, molecular formula is C6H5BrClN, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a solution of 2,3,4-trifluorobenzoic acid (1 g, 5.68 mmol) and 4-bromo-2- chloroaniline (1.2 g, 5.68 mmol) in acetonitrile (10 mL) was added lithium amide (0.39 g, EPO 17.04 mmol) and the reaction stirred at 60 0C for 1.5 hours. The mixture was cooled to room temperature and then to 0 0C and acidified with aq. hydrochloric acid. The obtained precipitate was collected by filtration and washed with cold water and dried in vacuo to afford 2-[(4~bromo-2-chlorophenyl)amino]-3,4-difluorobenzoic acid (1.92 g, 94% yield) as a beige solid. MS (EI) for C13H7BrClF2NO2: 363 (MH+).

The synthetic route of 38762-41-3 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; EXELIXIS, INC.; WO2007/44515; (2007); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 2106-04-9, name is 3-Chloro-2-fluoroaniline, A new synthetic method of this compound is introduced below., Safety of 3-Chloro-2-fluoroaniline

Sodium nitrite (9.7 g, 0.14 mol) was dissolved in 25 mL of water and added to a solution of 3-chloro-2-fluoroaniline (20.0 g, 0.14 mmol) in trifluoroacetic acid cooled to -5C (100 mL). mL), Sodium azide (9.1 g, 0.14 mol) dissolved in 5 mL of water was added dropwise to the reaction solution, and the reaction mixture was stirred at 0 C. for 2 hours and quenched with water. Ethyl acetate extraction was performed. The phases were dried, filtered and concentrated to give 1-azide-3-chloro-2-fluorobenzene (18.7 g) as a brown oil which was used directly for the next reaction.

The synthetic route of 2106-04-9 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Sichuan Kelun Botai Bio-pharmaceutical Co., Ltd.; Liu Gang; Wu Yongyong; Yu Hua; Wang Kunjian; Li Xiaoyong; Sun Ling; Wang Runjiang; Chen Qiangqiang; Yang Long; Song Hongmei; Zeng Hong; Zhang Hong; Ye Qijun; Wang Lichun; Wang Jingyi; (98 pag.)CN107540659; (2018); A;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Reference of 51114-68-2, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 51114-68-2 name is 3-Chloro-2-methoxyaniline, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

34. Preparation of 1-bromo-3-chloro-4-iodo-2-methoxybenzene; A mixture of 3-chloro-2-methoxy aniline and 3-chloro-4-iodo-2-methoxyaniline (2.8 g, 2.5:1) was dissolved in dioxane (20 mL) and the resulting solution cooled on an ice bath while being treated with 48% HBr (20 mL). The dark purple mixture was then treated with NaNO2 (1.4 g, 19.5 mmol) in water (6 mL) with good stirring. After 10 minutes, CuBr (5.1 g, 35.5 mmol) was added and the mixture was removed from the ice bath and allowed to warm to room temperature and stir for 0.5 hour. The dark purple mixture was diluted with ethyl acetate and water then filtered through celite with ethyl acetate. The layers were separated and the organic layer was washed with saturated sodium sulfite and saturated ammonium chloride and dried (Na2SO4). Filtration, concentration and purification by flash silica gel chromatography (hexanes) gave 2.95 g of a colorless oil which was determined to be a 2.3:1 mixture of 1-bromo-3-chloro-2-methoxybenzene and 1-bromo-3-chloro-4-iodo-2-methoxybenzene which was used as is without further purification: 1H NMR (300 MHz, CDCl3): delta 7.49 (d, 1H), 7.19 (d, 1H,), 3.90 (s, 3H).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 3-Chloro-2-methoxyaniline, and friends who are interested can also refer to it.

Reference:
Patent; Balko, Terry W.; Schmitzer, Paul R.; Daeuble, John F.; Yerkes, Carla N.; Siddall, Thomas L.; US2007/179060; (2007); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 7149-75-9, name is 4-Chloro-3-methylaniline, belongs to chlorides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 7149-75-9, SDS of cas: 7149-75-9

General procedure: A mixture of benzil (1 mmol), aldehyde (1 mmol) primary amine(1 mmol), ammonium acetate (1 mmol) and eutectic mixture stabilized ferrofluids (0.05 g of Fe3O4 in 1 mL of urea-choline chloride based eutectic mixture) was heated at 60 °C with stirring for 2?6 h.After completion of the reaction, the mixture was cooled to room temperature and water was added and products recrystallized in ethanol. All compounds were characterized on the basis of their spectroscopic data (IR, NMR) and by comparison with those reported in the literature

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 4-Chloro-3-methylaniline, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Aziizi, Najmoddin; Manochehri, Zohreh; Nahayi, Adnan; Torkashvand, Sohila; Journal of Molecular Liquids; vol. 196; (2014); p. 153 – 158;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 56961-77-4, name is 1-Bromo-2,3-dichlorobenzene, A new synthetic method of this compound is introduced below., Safety of 1-Bromo-2,3-dichlorobenzene

31.8 g (100.0 mmol) of Compound 11-A, 22.6 g (100.0 mmol) of Compound 1-B, 2.7 g (3.0 mmol) of Pd2(dba)3, 1.3 g (6.0 mmol) of PtBu3 (50% solution in toluene), 28.8 g (300.0 mmol) of NaOtBu were mixed with 1,500 mL of toluene under a nitrogen (N2) atmosphere, followed by stirring under reflux to allow a reaction to occur for 12 hours. At room temperature, an organic layer was separated therefrom using water and ethyl acetate, and the solvent was dried. Then, through silica gel column chromatography, 20.9 g of Compound 11-C was obtained at a yield of 45%. [0313] MS (MALDI-TOF) m/z: 463 [M]+

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Samsung Display Co., Ltd.; KIM, Myeongsuk; YE, Jimyoung; YOO, Byeongwook; JEONG, Jaeho; (102 pag.)US2020/98991; (2020); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 102-49-8, name is 3,4-Dichlorobenzylamine, This compound has unique chemical properties. The synthetic route is as follows., category: chlorides-buliding-blocks

Example 1: N-(3,4-dichlorobenzvl)-4-methvlpiperazine-l-carboxamideTo a solution of 3,4-dichlorobenzylamine (0.195 g, 1.11 mmol) and diisopropylethylamine(0.193 mL, 1.11 mmol) in 4 mL of THF was added a preformed solution of 4-nitrophenylchloroformate (0.223 g, 1.11 mmol) in 4 mL of THF. The reaction mixture was stirred at RTfor 3.5 h. To this solution was added N-methyl piperazine (0.442 g, 4.42 mmol) and theresulting solution was stirred at RT for 16h. The reaction mixture was concentrated underreduced pressure, diluted with EtOAc (50 mL) and the solution was washed with saturatedaqueous sodium bicarbonate (2 x 50 mL) and brine (50 mL). The solvent was removed underreduced pressure and the residue was subjected to supercritical fluid chromatography (21 mmx 150 mm diol-bonded SiC>2 (6|J,m particle size), isocratic method, 25percent MeOH (containing0.5percent isopropyl amine) in CO2) to afford the title compound as a pale yellow solid (0.245 g,73percent). MS m/z 302.2 (M+H)+; .H NMR (300.1 MHz, DMSO-d6) 52.17 (s, 3H), 2.22-2.26(m, 4H), 3.25-3.31 (m, 4H), 4.20 (d, J=5.8Hz, 2H), 7.12 (t, J=5.8Hz, 1H), 7.23 (dd, .7=8.2,2.0Hz, 1H), 7.47 (d, J=1.8Hz, 1H), 7.56 (d, /=8.2Hz, 1H).

According to the analysis of related databases, 102-49-8, the application of this compound in the production field has become more and more popular.

Reference:
Patent; ASTRAZENECA AB; WO2006/14135; (2006); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Synthetic Route of 918538-05-3, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 918538-05-3, name is 2,4-Dichloropyrrolo[2,1-f][1,2,4]triazine belongs to chlorides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

General procedure: Compound 183a was prepared from tert-butyl 2,4-dichloro-5,6-dihydropyrido[3,4- d]pyrimidine-7(8H)-carboxylate (182a) (1.0 g, 3.29 mmol) in 2-Propanol (15 mL) using DIPEA (2.3 mL, 13.15 mmol) and 1-(3,4,5-trimethoxyphenyl)-1H-imidazol-4-amine (57a) (0.98 g, 3.95 mmol). This gave after workup and purification by flash column chromatography [silica gel, (12 g) eluting with DMA-80 in DCM (0 to 80%)] fert-butyl 2-chloro-4-((l-(3,4,5- trimethoxyphenyl)-lH-imidazol-4-yl)amino)-5,6-dihydropyrido[3,4-d]pyrimidine-7(8H)- carboxylate (183a) (0.87 g, 51 % yield) as a buff solid; NMR (300 MHz, DMSO-^e) delta 9.65 (s, 1H, D20 exchangeable), 8.16 (d, J = 1.5 Hz, 1H), 7.78 (d, J = 1.6 Hz, 1H), 6.90 (s, 2H), 4.35 (s, 2H), 3.87 (s, 6H), 3.69 (s, 3H), 3.61 (t, J = 5.8 Hz, 2H), 2.69 – 2.60 (m, 2H), 1.43 (s, 9H).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2,4-Dichloropyrrolo[2,1-f][1,2,4]triazine, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; BIOCRYST PHARMACEUTICALS, INC.; KOTIAN, Pravin, L.; BABU, Yarlagadda, S.; KUMAR, V., Satish; ZHANG, Weihe; LU, Peng-Cheng; RAMAN, Krishnan; (747 pag.)WO2018/232094; (2018); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Related Products of 7051-16-3, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 7051-16-3, name is 1-Chloro-3,5-dimethoxybenzene belongs to chlorides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

EXAMPLE 26A 5-chlorobenzene-1,3-diol A solution of 5-chloro-1,3-dimethoxybenzene (5.41 g, 31.3 mM) in methylene chloride (75 mL) at -78 C. was stirred with a 1M solution of BBr3 in methylene chloride (63 mL) for 45 minutes. The reaction was allowed to warm to room temperature overnight and diluted with water (75 mL). The layers were separated and the aqueous layer washed two times with methylene chloride. The aqueous layer was acidified with 1N HCl and extracted 3 times with ethyl acetate. The combined organic layers were washed with 1N sodium thiosulfate (1*35 mL) and water (1*25 mL). The organic layer was dried (MgSO4), filtered and concentrated under reduced pressure and purified by chromatography (methylene chloride/acetone) to provide the titled compound. MS ESI(-)) m/e 143 (M-H)+; 1H NMR (300 MHz, CDCl3) delta 6.45 (d, 2H), 6.25 (t, 1H), 5.41 (bs, 2H).

The synthetic route of 1-Chloro-3,5-dimethoxybenzene has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Abbott Laboratories; US6972340; (2005); B2;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics