Category: chlorides-buliding-blocks

New carvacrol and thymol derivatives as potential insecticides: synthesis, biological activity, computational studies and nanoencapsulation was written by Natal, Carolina M.;Fernandes, Maria Jose G.;Pinto, Nuno F. S.;Pereira, Renato B.;Vieira, Tatiana F.;Rodrigues, Ana Rita O.;Pereira, David M.;Sousa, Sergio F.;Fortes, A. Gil;Castanheira, Elisabete M. S.;T. Goncalves, M. Sameiro. And the article was included in RSC Advances in 2021.Electric Literature of C6H9ClO3 The following contents are mentioned in the article:

New compounds with potential insecticide activity were synthesized by structural modifications performed in the monoterpenoid phenolic moieties of carvacrol and thymol, resulting in a set of derivatives with the ether function containing the Pr, chloropropyl or hydroxypropyl chains, as well as a bicyclic ether with an unsaturated chain containing a carboxylic acid terminal. In addition, an analog of carvacrol and thymol isomers bearing methoxyl, 1-hydroxyethyl and (3-chlorobenzoyl)oxy, instead of the three original Me groups, was also synthesized. Several structural changes that resulted in diminished insecticide activity have been identified, but two significantly active mols. have been synthesized, one of them being less toxic to human cells than the naturally-derived starting materials. Structure-based inverted virtual screening and mol. dynamics simulations demonstrate that these active mols. likely target the insect odorant binding proteins and/or acetylcholinesterase and are able to form stable complexes. For the most promising compounds, nanoencapsulation assays were carried out in liposomes of egg phosphatidylcholine/cholesterol (7 : 3) prepared by both thin film hydration and ethanolic injection methods. The compound-loaded liposomes were generally monodisperse and with sizes smaller than or around 200 nm. The thin film hydration method allowed high encapsulation efficiencies (above 85%) for both compounds and a delayed release, while for the systems prepared by ethanolic injection the encapsulation efficiency is lower than 50%, but the release is almost complete in two days. This study involved multiple reactions and reactants, such as Ethyl 4-chloro-3-oxobutanoate (cas: 638-07-3Electric Literature of C6H9ClO3).

Ethyl 4-chloro-3-oxobutanoate (cas: 638-07-3) belongs to organic chlorides. Organic chlorides are compounds containing a carbon-chlorine bond, which are widely used in the oil field as a wax dissolver. Aliphatic organochlorides are often alkylating agents as chlorine can act as a leaving group, which can result in cellular damage.Electric Literature of C6H9ClO3

Referemce:
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

A fast and robust method for the extraction and analysis of quaternary alkyl ammonium compounds from soil and sewage sludge was written by Heyde, Benjamin Justus;Barthel, Anne;Siemens, Jan;Mulder, Ines. And the article was included in PLoS One in 2020.Product Details of 122-18-9 The following contents are mentioned in the article:

Alkyltrimethylammonium compounds (ATMACs), dialkyldimethylammonium compounds (DADMACs) and benzylalkyldimethylethylammonium compounds (BACs) are quaternary alkylammonium compounds (QAAC), which are released into the environment in large quantities after their use in cleaning agents and disinfectants. Despite their potential role as selective agents promoting resistance against QAACs as well as antibiotics, there is a lack of data for QAACs in soil due to the lack of sensitive anal. methods. Therefore, we present a robust and fast method for the extraction and quantification of concentrations of these compounds in soil and sewage sludge. The method is based on ultrasonic extraction (USE) with a mixture of acetonitrile and HCl followed by a solid phase extraction (SPE) cleaning step and a subsequent quantification of concentrations with high performance liquid chromatog. with mass spectrometry (HPLC-MS/MS) in multi mass reaction mode (MRM). The proposed method is suitable for the quantification of ATMACs (chain length C-8 to C-16), BACs (C-8 to C-18) and DADMACs (C-8 to C-16). The achieved limits of quantification (LOQ) range from 0.1μg kg-1 to 2.1μg kg-1. The recovery rates of spiked soil samples for non-deuterated homologues were between 47% and 57%. The anal. of sewage sludge samples and soil samples revealed that BAC-C12 was the most abundant QAAC with concentrations up to 38600μg kg-1 in sewage sludge and up to 81μg kg-1 in a Mexican soil that was irrigated with wastewater. Overall, the presented methods open perspectives for effectively studying fate and effects of QAACs in soils. This study involved multiple reactions and reactants, such as N-Benzyl-N,N-dimethylhexadecan-1-aminium chloride (cas: 122-18-9Product Details of 122-18-9).

N-Benzyl-N,N-dimethylhexadecan-1-aminium chloride (cas: 122-18-9) belongs to organic chlorides. Organic chlorides can cause corrosion in pipelines, valves and condensers, and cause catalyst poisoning. The hydrocarbon processing industry (HPI) and others are affected by damage caused by these substances. Organochlorine compounds are lipophylic, meaning they are more soluble in fat than in water. This gives them a high tenancy to accumulate in the food chain (biomagnification).Product Details of 122-18-9

Referemce:
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Modification of nano-clays with ionic liquids for the removal of Cd (II) ion from aqueous phase was written by Naderi, Arman;Delavar, Mohmmad Amir;Ghorbani, Yousef;Kaboudin, Babak;Hosseini, Mehdi. And the article was included in Applied Clay Science in 2018.Category: chlorides-buliding-blocks The following contents are mentioned in the article:

The present study attempts to synthesize nano-modified clays of Na-bentonite (Bent) and montmorillonite (MT), using three imidazolium-based ionic liquids (ILs) including 3,3′-(hexyl)bis(3-methylimidazolium) bromide chloride (H(mim)₂[Br][Cl]), 1-hexyl-3-methylimidazolium chloride ([Hmim][Cl]) and 1-octyl-3-methylimidazolium chloride ([Omim][Cl]). X-ray diffraction (XRD), Fourier transformed IR spectroscopy (FT-IR), carbon, hydrogen and nitrogen elemental anal. (CHN), scanning electron microscope (SEM) and sp. surface area (SSA) (using N₂-BET) techniques provided evidence of successful modification of the guest clays. Removal of Cd (II) from aqueous phase was investigated using the modified clays under different exptl. conditions of reaction time, pH and adsorbent dosage. Detailed isotherms and kinetic studies showed that the modified clays have much higher Cd (II) adsorption capacity compared to those of the starting clay minerals. The maximum Cd (II) absorption capacities of 87.46 and 94.6mg g^-1 were observed in [H(mim)₂]-MT and [H(mim)₂]-Bent with d-values of 35.4Å and 28.3Å resp. The [Omim]-clays had the highest adsorption affinities of Cd (II) in initial concentrations of Cd (II). This study shows that ILs could enhance the clay capacity and tendency for Cd (II) absorption with different trends based on the ILs structures. The modified clays using ILs are green and eco-friendly adsorbents and due to substantial increase in their capacity for the removal of heavy metals, they could have pos. economic and environmental impacts. This study involved multiple reactions and reactants, such as 1-Bromo-6-chlorohexane (cas: 6294-17-3Category: chlorides-buliding-blocks).

1-Bromo-6-chlorohexane (cas: 6294-17-3) belongs to organic chlorides. Chlorinated organic compounds are found in nearly every class of biomolecules and natural products including alkaloids, terpenes, amino acids, flavonoids, steroids, and fatty acids. Organochlorine compounds are lipophylic, meaning they are more soluble in fat than in water. This gives them a high tenancy to accumulate in the food chain (biomagnification).Category: chlorides-buliding-blocks

Referemce:
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Palladium (Pd⁰) Loading-Controlled Catalytic Activity and Selectivity for Chlorophenol Hydrodechlorination and Hydrosaturation was written by Luo, Yi-Hao;Cai, Yuhang;Long, Xiangxing;Zhou, Dandan;Zhou, Chen;Rittmann, Bruce E.. And the article was included in Environmental Science & Technology in 2022.HPLC of Formula: 13820-53-6 The following contents are mentioned in the article:

Reductive catalysis by zero-valent palladium nanoparticles (Pd⁰NPs) has emerged as an efficient strategy for promoting the detoxification of chlorophenols (CPs) via hydrogenation. Most studies achieved hydrodechlorination of CP to phenol for detoxification, but it requires considerably high energy input and harsh conditions to further hydrosaturate phenol to cyclohexanone (CHN) as the most desired product for resource recovery. This study documented 4-CP hydrodechlorination and hydrosatn. catalyzed by Pd⁰NPs deposited on H₂-transfer membranes in the H₂-based membrane catalyst-film reactor, which yielded up to 99% CHN selectivity under ambient conditions. It was further discovered that the Pd⁰ morphol. and size, both determined by Pd⁰ loading, were the key factors controlling the catalytic activity and selectivity: while sub-nano Pd particles catalyzed only 4-CP hydrodechlorination, Pd⁰NPs were able to catalyze the subsequent hydrosatn. that requires more Pd⁰ reactive sites than hydrodechlorination. In addition, better dispersion of Pd⁰, caused by lower Pd⁰ loading, yielded higher activity for hydrodechlorination but lower activity for hydrosatn. During the 15 day continuous tests, the substantial product from 4-CP hydrogenation was constantly phenol (>98%) for 0.2 g-Pd/m² and CHN (>92%) for 1.0 g-Pd/m². This study opens the door for selectively manipulating desired products from Pd⁰-catalyzed CP hydrogenation under ambient conditions. This study involved multiple reactions and reactants, such as Sodium tetrachloropalladate(II) (cas: 13820-53-6HPLC of Formula: 13820-53-6).

Sodium tetrachloropalladate(II) (cas: 13820-53-6) belongs to organic chlorides. Organic chlorides can be used in production of: PVC, pesticides, chloromethane, teflon, insulators. Aliphatic organochlorides are often alkylating agents as chlorine can act as a leaving group, which can result in cellular damage.HPLC of Formula: 13820-53-6

Referemce:
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Kinetics-controlled synthesis of gold-silver nanosheets with abundant in-plane cracking and their trimetallic derivatives for plasmon-enhanced catalysis was written by Zheng, Yiqun;Zhang, Gongguo;Ma, Yanyun;Kong, Yuhan;Liu, Feng;Liu, Maochang. And the article was included in CrystEngComm in 2022.COA of Formula: Cl4Na2Pd The following contents are mentioned in the article:

Controlled synthesis of two-dimensional noble metal nanomaterials with an in-plane branching morphol. has been of great research interest recently, but has so far achieved limited success for AuAg-based nanocrystals. Herein, we report the fabrication of gold-silver (AuAg) nanosheets with abundant in-plane cracking and sub-10 nm thickness via one-pot kinetics-controlled synthesis. In particular, the dropwise addition of Au/Ag precursor solutions into a mixture of octadecyltrimethylammonium chloride and ascorbic acid, kept in an ice-water bath, leads to the formation of nanobelts/nanowires initially, followed by their growth into branched nanosheets. These AuAg products can further convert to AuAgM (M = Pd or Pt) nanosheets via galvanic replacement reaction under ambient conditions. Interestingly, the AuAgPd nanosheets are obtained with a Au@PdAg core-shell elemental distribution with many zigzag edges. In contrast, the AuAgPt nanosheets show a homogeneous distribution of all three metals, together with a highly stippled surface. All these AuAg-based nanosheets exhibit strong absorbance in the near-IR region and thus show superb activities as photocatalysts for UV-vis light-assisted reduction of 4-nitrophenol due to the effect of plasmon enhancement. The present study provides a feasible route to generating AuAg-based multimetallic nanocrystals with a two-dimensional structure, in-plane branching morphol., and effective control over the elemental distribution, which could be potentially extended to other noble metals and/or alloys for the rational design of plasmonic photocatalysts. This study involved multiple reactions and reactants, such as Sodium tetrachloropalladate(II) (cas: 13820-53-6COA of Formula: Cl4Na2Pd).

Sodium tetrachloropalladate(II) (cas: 13820-53-6) belongs to organic chlorides. Organochlorines are organic compounds having multiple chlorine atoms. They were the first synthetic pesticides that were used in agriculture. They are resistant to most microbial and chemical degradations. The haloform reaction, using chlorine and sodium hydroxide, is also able to generate alkyl halides from methyl ketones, and related compounds. Chloroform was formerly produced thus.COA of Formula: Cl4Na2Pd

Referemce:
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Solid-Liquid Phase Equilibria and Boron Species Distribution in the Quaternary System LiCl-LiBO₂-Li₂B₄O₇-H₂O at T = 323.15 K and P = 0.1 MPa was written by Zhang, Tao;Zhuang, Liwei;Li, Dan;Meng, Lingzong;Deng, Tianlong;Guo, Yafei;Ma, Yong. And the article was included in Journal of Chemical & Engineering Data in 2022.SDS of cas: 7447-41-8 The following contents are mentioned in the article:

The solubilities of salts, refractive indexes, and pH values of the equilibrium liquid phases in the quaternary system LiCl-LiBO₂-Li₂B₄O₇-H₂O at 323.15 K were investigated by the isothermal dissolution method for the first time. The dry-salt diagram of the quaternary system consisted of one invariant point, three univariant curves and three crystallization fields corresponding to LiCl·H₂O, LiBO₂·2H₂O, and Li₂B₄O₇·3H₂O. The solution refractive indexes and pH values change regularly with the changing of concentration Combining the equilibrium constants for different boron species, the distributions of six boron species in the mixed solution in the systems LiCl-LiBO₂-H₂O, LiBO₂-Li₂B₄O₇-H₂O, and LiCl-Li₂B₄O₇-LiBO₂-H₂O were calculated with the total boron concentration and pH values. The main boron species in the mixed solution of the quaternary system are B₃O₃(OH)₄^–, B₄O₅(OH)₄^2-, B(OH)₃, and B₅O₆(OH)₄^–. The boron species distributions are mainly affected by the pH values and the concentration of total boron and LiCl in the solution The results of phase diagram and boron species distribution in the quaternary system can supply foundation data for separating lithium borate from brines. This study involved multiple reactions and reactants, such as Lithium chloride (cas: 7447-41-8SDS of cas: 7447-41-8).

Lithium chloride (cas: 7447-41-8) belongs to organic chlorides. Organic chlorides are compounds containing a carbon-chlorine bond, which are widely used in the oil field as a wax dissolver. Aliphatic organochlorides are often alkylating agents as chlorine can act as a leaving group, which can result in cellular damage.SDS of cas: 7447-41-8

Referemce:
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Synthesis, aggregation and adsorption behavior of benzyldimethylhexadecylammonium based double-chained metallosurfactants was written by Wagay, Tariq Ahmad;Askari, Hassan;Ismail, K.. And the article was included in Journal of Molecular Liquids in 2020.Safety of N-Benzyl-N,N-dimethylhexadecan-1-aminium chloride The following contents are mentioned in the article:

Benzyldimethylhexadecylammonium (BDHA) based double-chained metallosurfactants, BDHA₂[MCl₄] (M = Mn, Co, Ni, Cu, Zn) were synthesized and characterized by elemental anal., NMR (¹H, ¹³C) and FT-IR spectroscopy. Thermal gravimetric anal. showed more stability of synthesized metallosurfactants as compared to the precursor benzyldimethylhexadecylammonium chloride. Their critical micelle concentration (cmc) values were determined in aqueous medium by using surface tension, conductivity and fluorescence spectrophotometric methods. The cmc values follow the order: Mn > Co ≈ Cu ≈ Zn > Ni. The thermodn. parameters of micellization were computed from the temperature dependence of the cmc. These metallosurfactants have surprisingly low counterion binding constant values (0.25 to 0.31) compared to benzyldimethylhexadecylammonium chloride and other ionic surfactants. Compensation of enthalpy and entropy of micellization of BDHA₂[MCl₄] metallosurfactants is observed in the aqueous medium. Adsorption behavior of BDHA₂[MCl₄] metallosurfactants was assessed by calculating surface excess and area per mol. at the air/water interface. Dynamic light scattering and zeta potential measurements revealed the small average hydrodynamic diameter of highly stable micelles of the metallosurfactants in aqueous solutions (hydrodynamic diameter = 4-6 nm with polydispersity index <0.13 and zeta potential >+45 mV). Transmission electron microscope measurements also showed the presence of small spherical micelles. This study involved multiple reactions and reactants, such as N-Benzyl-N,N-dimethylhexadecan-1-aminium chloride (cas: 122-18-9Safety of N-Benzyl-N,N-dimethylhexadecan-1-aminium chloride).

N-Benzyl-N,N-dimethylhexadecan-1-aminium chloride (cas: 122-18-9) belongs to organic chlorides. Organochlorines stimulate the central nervous system and cause convulsions, tremor, nausea, and mental confusion. Examples are dichlorodiphenyltrichloroethane (DDT), chlordane, lindane, endosulfan, and dieldrin. Aliphatic organochlorides are often alkylating agents as chlorine can act as a leaving group, which can result in cellular damage.Safety of N-Benzyl-N,N-dimethylhexadecan-1-aminium chloride

Referemce:
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Towards Ni-rich layered oxides cathodes with low Li/Ni intermixing by mild molten-salt ion exchange for lithium-ion batteries was written by Luo, Yu-hong;Pan, Qing-lin;Wei, Han-xin;Huang, Ying-de;Tang, Lin-bo;Wang, Zhen-yu;He, Zhen-jiang;Yan, Cheng;Mao, Jing;Dai, Ke-hua;Zhang, Xia-hui;Zheng, Jun-chao. And the article was included in Nano Energy in 2022.Synthetic Route of ClLi The following contents are mentioned in the article:

In the conventional synthesis of layered transition metal oxides, the high-temperature process not only causes lithium loss due to evaporation, but also facilitate the inevitable cation mixing of Li⁺ and Ni²⁺, resulting in severe shifts in their stoichiometric ratios and thus structure instability. Herein, we report a universal ion-exchange method to prepared Ni-rich layered oxide materials LiNi₀.₈₅Co₀.₀₆Mn₀.₀₉O₂ (NCM85) with low Li/Ni intermixing at a low reaction temperature of 300C, where sodium-based layered oxides (NaNi₀.₈₅Co₀.₀₆Mn₀.₀₉O₂) were used as precursors for ion exchange with Li⁺ ion in lithium molten salts. By studying the effects of ion-exchange time and addnl. heat treatment on the structure and performance of the layered oxide materials, we established the processing-structure-performance relationships for Ni-rich NCM85 materials. Moreover, we further demonstrated the universality of this ion-exchange method and processing-structure-performance relationships for other layered oxide materials including LiNi0. ₅Co₀.₂Mn₀.₃O₂ and LiNi₀.₅Mn₀.₅O₂. We anticipate that such universal method of ion exchange and universal processing-structure-performance relationships can guide the rational design and synthesis of other layered oxide materials for lithium-ion batteries. This study involved multiple reactions and reactants, such as Lithium chloride (cas: 7447-41-8Synthetic Route of ClLi).

Lithium chloride (cas: 7447-41-8) belongs to organic chlorides. Organochlorines are organic compounds having multiple chlorine atoms. They were the first synthetic pesticides that were used in agriculture. They are resistant to most microbial and chemical degradations.While alkyl bromides and iodides are more reactive, alkyl chlorides tend to be less expensive and more readily available. Alkyl chlorides readily undergo attack by nucleophiles.Synthetic Route of ClLi

Referemce:
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Ultra-low-modulus positive-type photosensitive polyimides (4). Improvement of adhesion strength with copper foil was written by Ishii, Junichi;Morita, Keisuke;Hasegawa, Masatoshi. And the article was included in Journal of Photopolymer Science and Technology in 2009.Reference of 2272-40-4 The following contents are mentioned in the article:

Amide- and triazine-containing diamines were incorporated by copolymerization into a siloxane-containing ultra-low-modulus polyimide (PI) as a novel cover layer material to solve some serious problems in the plating process such as interpenetration of an acidic plating solution into the interface between the S-side of electro-deposited copper foil and the cover layer. Our previous approach, a phys. roughness modification of the S-side was effective to inhibit the interpenetration of the plating solution This result suggests that the Cu/cover layer adhesion strength can be an important factor in the present case. The present work describes our chem. approach to increase the adhesion strength by using some heterocyclic monomers expected as adhesion promoters. The modified siloxane-containing PI possessed significant film toughness in spite of their low inherent viscosities. Unfortunately, the use of the amide- and triazine-containing diamines with minor contents (5-20 mol %) did not enhance the peel strength, however, the initial peel strength was almost maintained at 5 mol% without curling in the copper clad laminates (CCL), although the value significantly decreased at higher contents (10-20 mol%) with a prompt increase in the tensile modulus of the PI films and concomitant CCL curling. The results suggest that the decreased peel strength is closely related to the increased modulus of the PIs. Other properties (thermal and elec. properties, resistance to plating solutions, and photosensitivity etc.) of the modified siloxane-containing PIs will be also discussed in this work. This study involved multiple reactions and reactants, such as 4,6-Dichloro-N-phenyl-1,3,5-triazin-2-amine (cas: 2272-40-4Reference of 2272-40-4).

4,6-Dichloro-N-phenyl-1,3,5-triazin-2-amine (cas: 2272-40-4) belongs to organic chlorides. Chlorinated organic compounds are found in nearly every class of biomolecules and natural products including alkaloids, terpenes, amino acids, flavonoids, steroids, and fatty acids. Organochlorine compounds are lipophylic, meaning they are more soluble in fat than in water. This gives them a high tenancy to accumulate in the food chain (biomagnification).Reference of 2272-40-4

Referemce:
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Rational Identification of Hsp90 Inhibitors as Anticancer Lead Molecules by Structure Based Drug Designing Approach was written by Gupta, Sayan D.;Swapanthi, Pappu S.;Bhagya, Deshetti;Federicci, Fernando;Mazaira, Gisela I.;Galigniana, Mario D.;Subrahmanyam, Chavali V. S.;Gowrishankar, Naryanasamy L.;Raghavendra, Nulgumnalli M.. And the article was included in Anti-Cancer Agents in Medicinal Chemistry in 2020.Recommanded Product: 4-Chlororesorcinol The following contents are mentioned in the article:

Heat shock protein 90 (Hsp90) is an encouraging anticancer target for the development of clin. significant mols. Schiff bases play a crucial role in anticancer research because of their ease of synthesis and excellent antiproliferative effect against multiple cancer cell lines. Therefore, we started our research work with the discovery of resorcinol/4-chloro resorcinol derived Schiff bases as Hsp90 inhibitors, which resulted in the discovery of a viable anticancer lead mol. The objective of the study is to discover more promising lead mols. using our previously established drug discovery program, wherein the rational drug design is achieved by mol. docking studies. The docking studies were carried out by using Surflex Geom X program of Sybyl X-1.2 version software. The mols. with good docking scores were synthesized and their structures were confirmed by IR, ¹H NMR and mass spectral anal. Subsequently, the mols. were evaluated for their potential to attenuate Hsp90 ATPase activity by Malachite green assay. The anticancer effect of the mols. was examined on PC3 prostate cancer cell lines by utilizing 3-(4,5-dimethythiazol-2-yl)-2,5-diphenyl tetrazolium bromide (MTT) assay methodol. Schiff bases 11, 12, 20, 23 and 27 exhibiting IC₅₀ value below 1μM and 15μM, in malachite green assay and MTT assay, resp., emerged as viable lead mols. for future optimization. The research work will pave the way for the rational development of cost-effective Schiff bases as Hsp90 inhibitors as the method employed for the synthesis of the mols. is simple, economic and facile. This study involved multiple reactions and reactants, such as 4-Chlororesorcinol (cas: 95-88-5Recommanded Product: 4-Chlororesorcinol).

4-Chlororesorcinol (cas: 95-88-5) belongs to organic chlorides. Chlorinated organic compounds are found in nearly every class of biomolecules and natural products including alkaloids, terpenes, amino acids, flavonoids, steroids, and fatty acids.While alkyl bromides and iodides are more reactive, alkyl chlorides tend to be less expensive and more readily available. Alkyl chlorides readily undergo attack by nucleophiles.Recommanded Product: 4-Chlororesorcinol

Referemce:
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics