Category: chlorides-buliding-blocks

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 26487-67-2, name is 1-(2-Chloroethyl)azepane hydrochloride, A new synthetic method of this compound is introduced below., HPLC of Formula: C8H17Cl2N

To a solution of 1,1-bis(4-hydroxyphenyl)-2-phenylethene (100 mg, 0.344 mmol) in DMF (3.44 mL) at 0 C was added 60% sodium hydride (dispersion in paraffin liquid, 82.6 mg, 2.07 mmol). The reaction mixture was stirred for 15 min at 50 C and then N-(2-chloroethyl)hexahydro-1H-azepine hydrochloride (222 mg, 1.12 mmol) was added in portions at room temperature. After the reaction mixture had been stirred for 4 h at 50 C, saturated aqueous ammonium chloride was added at 0 C. The mixture was extracted with dichloromethane and the organic layer was dried over sodium sulfate. After filtration of the mixture and evaporation of the solvent, the crude product was purified by thin layer chromatography on silica (eluant; ammoniacal chloroform/methanol = 30/1) to afford RID-F-S*1 (compound 13) (147 mg, 79%) as a brown oil

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Hasegawa, Makoto; Yasuda, Yukari; Tanaka, Makoto; Nakata, Kenya; Umeda, Eri; Wang, Yanwen; Watanabe, Chihiro; Uetake, Shoko; Kunoh, Tatsuki; Shionyu, Masafumi; Sasaki, Ryuzo; Shiina, Isamu; Mizukami, Tamio; European Journal of Medicinal Chemistry; vol. 71; (2014); p. 290 – 305;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 873-38-1, name is 2-Bromo-4-chloroaniline, belongs to chlorides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 873-38-1, category: chlorides-buliding-blocks

General procedure: 1-Hydroxynaphthalene-2-carboxylic acid (5.3 mmol) and the corresponding substituted aniline (5.3 mmol) were suspended in 30 mL of dry chlorobenzene. Phosphorous trichloride (2.65 mmol) was added dropwise, and the reacting mixture was heated in the microwave reactor at maximal allowed power 500 W and 130 C, using infrared flask-surface control of temperature, for 15 min. The solvent was evaporated under reduced pressure, the solid residue washed with 2 M HCl, and the crude product was recrystallized from aqueous ethanol. All the studied compounds are presented in Table 1.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Article; Gonec, Tomas; Kos, Jiri; Pesko, Matus; Dohanosova, Jana; Oravec, Michal; Liptaj, Tibor; Kralova, Katarina; Jampilek, Josef; Molecules; vol. 22; 10; (2017);,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

2268-05-5, name is 2,6-Dichlorofluorobenzene, belongs to chlorides-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. name: 2,6-Dichlorofluorobenzene

n a 250 ml four-necked flask, 64 g of 98% concentrated sulfuric acid was charged(0.606 mol) of 2,6-dichlorofluorobenzene was added dropwise to a stirred solution of 33 g of 98% concentrated sulfuric acid at 20 to 25 CMixed with 39 g of 98% concentrated nitric acid, 2.5 hThe addition is complete.After warming up to 40 ~ 45 C and heat 1.5 hours. After the end of the washing, to neutral, organic subtractionPressure dehydration after use.In a 250 ml four-necked flask285gSulfolane and87g (1.5mol) KF, after dehydration by adding the last step nitration products,In 195 ¡À 5 C heat 5h, vacuum distillation of the solvent and then distillation 2,3,4-trifluoronitrobenzene 91. 7g,The content was 99.8% and the yield was 85.5%

The synthetic route of 2268-05-5 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Binhai Yongtai Medical Chemical Co Ltd; He, Renbao; Shao, Hongming; (8 pag.)CN102249881; (2016); B;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 6579-54-0, name is 2,6-Dichlorobenzenesulfonyl chloride, This compound has unique chemical properties. The synthetic route is as follows., Product Details of 6579-54-0

General procedure: Benzenesulfonyl chloride (1 mmol) in butanone (5 mL) was heated with stirring to 40C, and cyanamide solution (50%)was added dropwise, then the temperature was raised to 60C and stirring continued for 3 h. The compound 7 (0. 8 mmol)was added and heated to 80C for 3 h. After cooling to 40C, the reaction mixture was poured into cold water while stirring, white crystals or powders were precipitated, filtered,washed with water, and dried. Analytically pure samples were obtained by recrystallization from aqueous ethanol.

According to the analysis of related databases, 6579-54-0, the application of this compound in the production field has become more and more popular.

Reference:
Article; Li, Jie; Zheng, Tu-Cai; Jin, Yi; Xu, Jian-Guo; Yu, Jian-Gang; Lv, Yan-Wen; Chemical and Pharmaceutical Bulletin; vol. 66; 1; (2018); p. 55 – 60;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 627-42-9, name is 2-Methoxyethyl chloride, A new synthetic method of this compound is introduced below., SDS of cas: 627-42-9

Starting Material Synthetic Example 106 4-Hydroxybenzaldehyde (300 g) and 2-chloroethyl methyl ether (279 g) were dissolved in DMF (3 L) and potassium carbonate (408 g) was added. The mixture was stirred with heating at 60 C. for 16 hr. After the reaction, the reaction mixture was poured into water and liberated oil was extracted with ethyl acetate. The organic layer was washed with 1N aqueous sodium hydroxide solution and washed with saturated brine. The organic layer was dried over anhydrous magnesium sulfate. After drying, the residue was concentrated under reduced pressure to give 4-(2-methoxyethoxy)benzaldehyde as an oil (212 g). 1H-NMR 270 MHz (CDCl3, ppm) delta: 9.87(1H, s), 7.82(2H, d), 7.02(2H, d), 4.18(2H, m), 3.77(2H, m), 3.44(3H, s).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Welfide Corporation; US6288061; (2001); B1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 106-39-8, name is 1-Bromo-4-chlorobenzene, belongs to chlorides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 106-39-8, Quality Control of 1-Bromo-4-chlorobenzene

General procedure: The catalytic o-arylation reaction was carried out in a magnetically stirred round bottom flask (capacity: 25 cm3), at the following reaction conditions: reaction mixture = 1 mmol aryl halides + 1.2 mmol phenol or naphthol + 3 ml solvent (DMF) + catalyst (50 mg), bath temperature = 140 C and reaction time = 7-15 h. The reaction was monitored by TLC. After completion of the reaction, the catalyst was separated by filtration and the filtrate was treated with water, followed by extraction with ethyl acetate to give the crude product, which was subsequently purified by column chromatography on silica gel with petroleum ether/ethyl acetate as eluent. The catalyst was further washed with acetone, dried and reused. The reaction product was isolated by column chromatography and was characterized by comparison of its NMR spectra with that reported earlier.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1-Bromo-4-chlorobenzene, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Choudhary; Dumbre; Yadav; Bhargava; Catalysis Communications; vol. 29; (2012); p. 132 – 136;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Reference of 61881-19-4,Some common heterocyclic compound, 61881-19-4, name is 2,2,2-Trifluoro-N-phenylacetimidoyl chloride, molecular formula is C8H5ClF3N, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: In a typical experimental procedure, a dry, two-necked, 50 mL round-bottomed flask equipped with a nitrogen inlet was charged with 5 mL of dry MeCN, 0.117 g (1.0 mmol) of indole and 0.24 g (1.0 mmol) of NaH. The solution was stirred under a nitrogen atmosphere at room temperature for 30 min, then a solution of 2a (1.0 mmol in 2 mL of dry MeCN) was added dropwise via a syringe. The mixture was stirred at room temperature for 20 h under an N2 atmosphere and then filtered. After removing the solvent under reduced pressure, the crude product was purified by preparative thin-layer chromatography on silica gel [eluent: n-hexane/EtOAC, 4:1] to give the product 4a. The products obtained from indole-3-carbaldehyde were purified by recrystallization from EtOH (twice).

The synthetic route of 61881-19-4 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Darehkordi, Ali; Rahmani, Fariba; Hashemi, Vahide; Tetrahedron Letters; vol. 54; 35; (2013); p. 4689 – 4692;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 94-97-3, name is 5-Chloro-1H-benzo[d][1,2,3]triazole, A new synthetic method of this compound is introduced below., Recommanded Product: 94-97-3

General procedure: TBHP (70% w.t. in H2O, 25.7 muL, 0.19 mmol) and an excess of iodine (3-4 equiv) was added to a solution of 1b (50 mg, 0.19 mmol) and 5-methyl-1H-benzotriazole (50 mg, 0.38 mmol) in anhydrous DMF (6 mL). The resulting dark solution was stirred for 15 min, after which TLC indicated 80% consumption of 1b and formation of less polar product(s). After 16 h, volatiles were evaporated and the resulting dark gum was partitioned between CHCl3 (10 mL) and diluted Na2S2O3/H2O (1 mL). The separated organic layer was concentrated and the residue was column chromatographed (10% MeOH/EtOAC) to give crude 11a/b (35 mg, 48%). Purification of this material on a semi-preparative HPLC column (Phenomenex Gemini RP-C18 column; 5 mu, 25 cm x 1 cm) using isocratic mobile phase mixture 20% CH3CN in H2O at a flow rate of 1.5 mL/min gave mixture (~3:2) of 11a/11b (23.5 mg, 32%; tR = 17 min) as a white powder: UV (MeOH) lambdamax 278 nm (epsilon 17 100), lambdamin 242 nm (epsilon 8050); 1H NMR delta 8.21 (s, 1H, H2), 8.10 (d, 0.4H, J = 8.4,HAr), 8.01 (s, 0.6H, HAr), 7.48-7.56 (m, 3.2H, HAr,NH2 ), 7.36 (s, 0.4 H, HAr), 7.35 (d, 0.4H, J = 8.4 Hz, HAr), 7.02 (s, 1H, H7), 5.58-5.62 (m, 1H, OH), 5.18-5.25 (m, 2H, H1′, OH), 4.55-5.00 (m, 2H,H2′, OH), 3.72-3.85 (m, 2H, H3′, H4′), 3.41-3.47 (m, 1H, H5′) 3.22-3.30 (m, 1H, H5”), 2.52 (brs, 1.8H, CH3), 2.48 (brs, 1.2H, CH3); 13CNMR delta 158.32, 158.26, 153.29, 153.28, 148.99, 148.94, 145.27, 143.28, 140.25, 135.83, 135.22, 133.84, 131.63, 127.44, 126.07, 125.97, 119.33, 118.63, 110.21, 109.78, 102.15, 102.12, 99.63, 99.53, 88.39, 88.37, 86.12, 86.01, 71.45, 71.40, 70.88, 70.86, 62.24, 21.57, 21.07; HRMS (ESI) m/z [M+H]+calcd for [C18H20N7O4]+398.1571; found 398.1589. Note: Analogous treatment of 1b (100 mg, 0.38 mmol) with 5-methyl-1H-benzotriazole (100 mg, mmol) in the presence of 0.2 equiv. of iodine (19 mg) gave 11a/11b (10 mg, 6%).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Kavoosi, Sam; Rayala, Ramanjaneyulu; Walsh, Brenna; Barrios, Maria; Gonzalez, Walter G.; Miksovska, Jaroslava; Mathivathanan, Logesh; Raptis, Raphael G.; Wnuk, Stanislaw F.; Tetrahedron Letters; vol. 57; 39; (2016); p. 4364 – 4367;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 13526-66-4, name is 3-Bromo-6-chloroimidazo[1,2-b]pyridazine, A new synthetic method of this compound is introduced below., Recommanded Product: 3-Bromo-6-chloroimidazo[1,2-b]pyridazine

To a solution of 3-bromo-6-chloroimidazo[1,2-b]pyridazine (500 mg, 2.15 mmol) in a mixed solvent of dioxane (5 mL) and water (0.5 mL) was added (3-fluorophenyl)boronic acid (273 mg, 1.96 mmol), K2CO3 (811 mg, 5.88 mmol) and Pd(dppf)2Cl2 (79 mg, 0.098 mmol). The reaction mixture was stirred at 80 C. overnight under N2. TLC (PE:EA=5:1) showed the starting material was consumed. The mixture was cooled and concentrated. The residue was purified by column chromatography on silica gel (petroleum ether/EtOAc=20:1 to 1:1) to give 6-chloro-3-(3-fluorophenyl)imidazo[1,2-b]pyridazine (300 mg, 56%) as a yellow solid.

The synthetic route of 13526-66-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Tolero Pharmaceuticals, Inc.; Xu, Yong; Brenning, Benjamin Gary; Kultgen, Steven G.; Liu, Xiaohui; Saunders, Michael; Ho, Koc-Kan; (119 pag.)US9416132; (2016); B2;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 13918-92-8, name is 2,4-Difluorobenzene-1-sulfonyl chloride, This compound has unique chemical properties. The synthetic route is as follows., HPLC of Formula: C6H3ClF2O2S

General procedure: To a mixture of7-(1,4-diazepan-1-yl)-2-(4-fluorophenyl)imidazo[1,2-a]pyrimidine 6 (1 mmol)in CH2Cl2 was added Et3N (2 mmol), followedby corresponding acid chloride or sulfonylchloride or alkyl halide (1.1 mmol)at room temperature and the mixture was allowed to stir for 3 h. The mixturewas diluted with water (50 mL), extracted with CH2Cl2(2 ¡Á 50 mL) and the combined organic layers were dried over anhydrous Na2SO4,filtered and concentrated under reduced pressure. The residue was purified bycolumn chromatography over silica gel [100-200 mesh; CH3OH:CH2Cl2 (1:9)]. Fractions containingthe product were concentrated under vacuum to obtain title compounds (10a-i,11a-g, 12).

According to the analysis of related databases, 13918-92-8, the application of this compound in the production field has become more and more popular.

Reference:
Article; Mantipally, Manohar; Gangireddy, Madhusudhana Reddy; Gundla, Rambabu; Badavath, Vishnu Nayak; Mandha, Santhosh Reddy; Maddipati, Venkatanarayana Chowdary; Bioorganic and Medicinal Chemistry Letters; vol. 29; 16; (2019); p. 2248 – 2253;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics