Category: chlorides-buliding-blocks

Reference of 2613-34-5, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 2613-34-5, name is 3-Chloro-2,4-difluoroaniline belongs to chlorides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

To a solution of 3-chloro-2,4-difluoroaniline (1 g, 6.1 mmol) in DMF (20 mL) was added NIS (1.7 g, 7 mmol) at RT. The mixture was stirred at RT for 3 h. The reaction mixture was diluted with water (20 mL) and extracted with EA (10 mL x 3). The combined organic phases were dried over Na2S04, filtered and concentrated. The crude product was purified by silica gel chromatography (PE/EA=lO: l) to give 3-chloro-2,4-difluoro-6-iodoaniline (1.1 g, 62% yield) as a yellow oil. 1H NMR (CDC13, 400 MHz): d 7.09-7.09 (m, 1H).

The synthetic route of 3-Chloro-2,4-difluoroaniline has been constantly updated, and we look forward to future research findings.

Reference:
Patent; PADFORWARD LLC; KANOUNI, Toufike; (109 pag.)WO2019/152883; (2019); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Reference of 104-52-9, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 104-52-9, name is 3-Phenylpropyl Chloride belongs to chlorides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

EXAMPLE 2 Preparation of N-methyl 3-(o-methoxyphenoxy)-3-phenylpropylamine hydrochloride. A reaction mixture consisting of 1000 g. of 3-chloropropylbenzene, 1500 g. of N-bromosuccinimide, 5 g. of benzoyl peroxide and 6 l. of carbon tetrachloride were placed in a 12 l. 3-neck, round-bottom flask equipped with stirrer and condenser. The reaction mixture was stirred and heated until an exothermic reaction began. The heat source was then removed, and the refluxing of reaction mixture controlled by external cooling. After the reaction had been completed as noted by the disappearance of the N-bromosuccinimide, the reaction mixture was cooled and crystalline succinimide collected by filtration. The succinimide filter cake was washed with carbon tetrachloride. The combined filtrate and wash was concentrated in vacuo. The residue comprising 3-chloro-1-bromopropylbenzene obtained in the above reaction was shown by a NMR to be the desired material and was used without further purification.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 3-Phenylpropyl Chloride, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Eli Lilly and Company; US4018895; (1977); A;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

These common heterocyclic compound, 202925-08-4, name is 1-Chloro-3-fluoro-5-methoxybenzene, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Recommanded Product: 202925-08-4

A mixture of aluminum chloride (2.50 g, 18.7 mmol) and acetyl chloride (1.30 rnL, 18.7 mmol) in CH2Cl2 (10.0 mL) was stirred at 0 C for 30 min. The reaction mixture was slowly added with 1-chloro-3-fluoro-5-methoxybenzene (13-1, 1.00 g, 6.23 mmol) in CH2Cl2 (5.0 mL). The solution was stirred at room temperature for additional 2.0 h. The solution was bsified with saturated aqueous NaHCO3, and the organic layer was separated,dried over MgSO4(s), and concentrated under reduced pressure. The residue was purified by column chromatography on silica gel to give a mixture of 1-(2-chloro-6-fluoro-4-methoxyphenyl)ethanone (13-2) and 1-(2-chloro-4-fluoro-6-methoxyphenyl)ethanone (13-3) as yellow oil in 1.2 g (5.9 mmol) total weight (95% yield).

The synthetic route of 1-Chloro-3-fluoro-5-methoxybenzene has been constantly updated, and we look forward to future research findings.

Reference:
Patent; TAIVEX THERAPEUTICS CORPORATION; HUANG, Yu-Ling; CHUANG, Shih-Hsien; LEE, Ying-Shuan Eda; HUANG, Jiann-Jyh; LAU, Johnson; WO2013/82324; (2013); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Application of 6940-78-9, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 6940-78-9, name is 1-Bromo-4-chlorobutane belongs to chlorides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

Production Example 1 Synthesis of dihydrate of Compound (I) Methanol (149 L), 7-hydroxy-1H-quinolin-2-one (14.87 kg), and potassium hydroxide (6.21 kg) were mixed in a reaction vessel, and the resulting mixture was stirred. After dissolution, 1-bromo-4-chlorobutane (47.46 kg) was added thereto, and the resulting mixture was stirred under reflux for seven hours. Thereafter, the mixture was stirred at 10 C. for one hour. The precipitated crystal was centrifuged and washed with methanol (15 L). The wet crystal was collected and placed in a tank. Water (149 L) was added thereto, followed by stirring at room temperature. After centrifugation, the result was washed with water (30 L). The wet crystal was collected and placed in a tank. After adding methanol (74 L), the mixture was stirred under reflux for one hour, cooled to 10 C., and then stirred. The precipitated crystal was centrifuged and washed with methanol (15 L). The separated crystal was dried at 60 C. to obtain 7-(4-chlorobutoxy)-1H-quinolin-2-one (15.07 kg).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1-Bromo-4-chlorobutane, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Sato, Tetsuya; Minowa, Takuya; Hoshika, Yusuke; Toyofuku, Hidekazu; US2015/86632; (2015); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 932-32-1, name is 2-Chloro-N-methylaniline, A new synthetic method of this compound is introduced below., HPLC of Formula: C7H8ClN

To a solution of the 2-chloro-N-methylaniline (Intermediate 237) (8g, 0.057 mol.) in acetonitrile (340 mL) was added oxoacetic acid (42.2 g, 0.57 mol.). After stirring for 0.5 hours at room temperature, NaBH3CN (17.7 g, 0.285 mol) was added in portions by keeping the temperature below 40C. The mixture was stirred at room temperature for 2 hours then acetic acid (23 mL) was added drop-wise. After stirring for 1 hour, the solid material was removed by filtration and the filtrate was concentrated to dryness. The residue was poured in water and the pH was adjusted to 9 with aqueous NaOH. After extraction of the aqueous layer with EtOAc, the aqueous layer was acidified to pH: 4 with diluted HCI. The white solid was filtered, washed with water then dried to give the title compound as a white solid (7g, 62%). LC/MS: m/z 200.1 (M+H) Rt: 1.67 min.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; SMITHKLINE BEECHAM CORPORATION; WO2008/104524; (2008); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Reference of 174913-12-3, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 174913-12-3, name is 1-Bromo-3-chloro-5-methoxybenzene, This compound has unique chemical properties. The synthetic route is as follows.

Preparation 17 1-Bromo-2,3-dichloro-5-methoxybenzene 1-Bromo-3-chloro-5-methoxybenzene (Preparation 16, 6.0 g, 27 mmol) and trichloroisocyanuric acid (2.3 g, 9.9 mmol) were stirred in dimethylformamide (100 ml) at 50 C. for 3 hours. n-Heptane was added and the mixture filtered to remove insoluble impurities. The mixture was then concentrated in vacuo and the residue purified by silica gel column chromatography, eluding with n-heptane:ethyl acetate 9:1, to afford the title product as a white solid (5.0 g). 1H-NMR (CDCl3): 3.80 (s, 3H), 7.00 (s, 1H), 7.20 (s, 1H). GC-MS m/z 256 [MH]+, Rt=4.60 min

The chemical industry reduces the impact on the environment during synthesis 1-Bromo-3-chloro-5-methoxybenzene. I believe this compound will play a more active role in future production and life.

Reference:
Patent; Pfizer Limited; US2007/105872; (2007); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

These common heterocyclic compound, 202925-07-3, name is 2-Chloro-1-fluoro-4-methoxybenzene, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Recommanded Product: 202925-07-3

A mixture of 3-chloro-4-fluoroanisole (2.52 g, 15.7 mmol, 1.0 eq.), silver trifluoroacetate (8.53 g, 38.6 mmol, 2.5 eq.), iodine (7.94 g, 31.3 mmol, 2.0 eq.) and chloroform (100 mL) is stirred at r.t. for 16h. The reaction mixture is filtered through a silica plug on a fritted funnel and rinsed with chloroform. The filtrate is washed successively with an aqueous solution of Na2S2O3, water and brine, dried over MgSO4, filtered and concentrated in vacuo. The residue is purified by flash chromatography on silica gel to afford the expected product

The synthetic route of 2-Chloro-1-fluoro-4-methoxybenzene has been constantly updated, and we look forward to future research findings.

Reference:
Patent; GALAPAGOS NV; LES LABORATOIRES SERVIER; LABEGUERE, Frederic, Gilbert; HENG, Rama; DE CEUNINCK, Frederic, Andre; ALVEY, Luke, Jonathan; AMANTINI, David; BREBION, Franck, Laurent; DEPREZ, Pierre, Marc, Marie, Joseph; GOSMINI, Romain, Luc, Marie; JARY, Helene; PEIXOTO, Christophe; POP-BOTEZ, Iuliana, Ecaterina; VARIN, Marie, Laurence, Claire; (180 pag.)WO2017/211666; (2017); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 103889-37-8, name is 1-Chloro-3-fluoro-2-(trifluoromethyl)benzene, A new synthetic method of this compound is introduced below., HPLC of Formula: C7H3ClF4

Concentrated nitric acid (12.6 mL) and concentrated sulfuric acid (12.6 niL) were combined at 0 C and treated with neat l-chloro-3-fluoro-2-(trifluoromethyl)benzene (5.36 g, 26.5 mmol) dropwise with stirring. The mixture was stirred at 0 0C for 10 minutes, allowed to warm to room temperature over 30 minutes, and poured into a beaker containing ice (50 g). The mixture was extracted with dichloromethane (3 x 30 mL). The organic extracts were combined, dried over sodium sulfate, filtered, and the filtrate was concentrated under reduced pressure. The residue was purified by flash chromatography (silica gel/ 10% ethyl acetate in hexanes, product Rf = 0.5) to provide an inseparable mixture of the title compound and a regioisomer. 1H NMR (CDCl3) major regioisomer delta 7.97 (dd, IH), 7.33 (dd, IH); minor regioisomer delta 8.18 (dd, IH), 7.53 (d, IH).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; ABBOTT LABORATORIES; WO2006/86229; (2006); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 89794-02-5, name is 4-Bromo-2-chlorotoluene, This compound has unique chemical properties. The synthetic route is as follows., Safety of 4-Bromo-2-chlorotoluene

Example 3 Bis(4,4′-(3-chloro-4-methylphenylhydroxyboryl)benzyl) ether; [Show Image] Bis(4-bromobenzyl) ether (157 mg) was dissolved in 8 mL of ether, and the solution was cooled to -78C. After addition of 2 mL of a 1 M sec-BuLi solution, the mixture was stirred for two hours (solution A). 4-Bromo-2-chlorotoluene (205 mg) was dissolved in 8 mL of ether, and the solution was cooled to -90C. After addition of 2 mL of a 1 M sec-BuLi solution, the mixture was stirred for two hours. Triisopropoxyborane (0.46 mL) was added to the resulting solution, and the mixture was stirred for 1.5 hours. The solution A was added to the solution, and the mixture was gradually returned to room temperature and stirred overnight. Aqueous dilute hydrochloric acid was added, and the mixture was stirred. The organic layer was dried and then concentrated and applied to a silica gel column to give 77 mg of the entitled compound as a grease. Rf= 0.48 (EtOAc, Hexane 1: 1) NMR (CDCl3) 2.35 (s, 6H), 4.53 (s, 4H), 7.1-8.2 (m, 14H)

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 89794-02-5.

Reference:
Patent; Japan Science and Technology Agency; EP1961756; (2008); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 4584-46-7, name is 2-Chloro-N,N-dimethylethanamine hydrochloride, This compound has unique chemical properties. The synthetic route is as follows., name: 2-Chloro-N,N-dimethylethanamine hydrochloride

Reference Example 6 Manufacture of 4-dimethylaminoethyloxy-benzenethiol Dimethylaminoethyl chloride hydrochloride (2.40 g; 17.1 mmol) and 5.83 g (42.2 mmol) of potassium carbonate were successively added to a solution (70 ml) of 3.00 g (13.6 mmol) of 4-iodophenol in N,N-dimethylformamide followed by stirring at 70C for 15 hours. The reaction solution was diluted with water and extracted with ethyl acetate. The organic layer was washed with water and a saturated aqueous saline solution, dried and concentrated. The resulting residue was purified by a silica gel column chromatography (chloroform: methanol = 30:1) to give 840 mg (yield: 21%) of an iodine derivative as an oily substance. _

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 4584-46-7.

Reference:
Patent; BANYU PHARMACEUTICAL CO., LTD.; EP1598349; (2005); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics