Category: chlorides-buliding-blocks

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 118-69-4, name is 2,6-Dichlorotoluene, A new synthetic method of this compound is introduced below., Application In Synthesis of 2,6-Dichlorotoluene

EXAMPLE 1-1 Preparation of 2,4-dichloro-3-methylbromobenzene To a solution of 48.8 g (0.3 mol) of 2,6-dichlorotoluene in 60 ml of carbon tetrachloride, 0.7 g of iron powder and 0.1 g of iodine were added. Then, 52.8 g (0.33 mol) of bromine was dropwise added thereto at room temperature while maintaining the reaction temperature at a level of from 22 to 25 C. After completion of the dropwise addition, the reaction was continued at the same temperature until generation of hydrogen bromide ceased. After the reaction, the reaction solution was added to 300 ml of ice water and extracted with 300 ml of 1,2-dichloroethane. The organic layer was separated and washed sequentially with water, a saturated sodium hydrogen sulfite aqueous solution, water and a saturated sodium chloride aqueous solution. Then, the solvent was distilled off under reduced pressure to obtain 71.9 g (yield: 99.5%) of desired 2,4-dichloro-3-methylbromobenzene. Melting point: 32-33 C.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Nissan Chemical Industries Ltd.; US4942246; (1990); A;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Related Products of 61881-19-4, A common heterocyclic compound, 61881-19-4, name is 2,2,2-Trifluoro-N-phenylacetimidoyl chloride, molecular formula is C8H5ClF3N, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: Add sodium acetate, trifluoroethylimidyl chloride (II), hydrazone (III), and 1 mL of organic solvent to the 35 mL Schlenk tube according to the raw material ratio in Table 1.Mix and stir well. After the reaction is completed according to the reaction conditions in Table 2, 2-4 hours,Add elemental iodine, continue the reaction for 1-2 hours, filter, and stir the sample in silica gel.After purification by column chromatography, the corresponding 5-trifluoromethyl-substituted 1,2,4-triazole compound (I) is obtained. The reaction process is shown by the following formula:

The synthetic route of 61881-19-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Zhejiang Sci-Tech University; Chen Zhengkai; Hu Sipei; Yang Zuguang; (10 pag.)CN110467579; (2019); A;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 7051-16-3 as follows. Computed Properties of C8H9ClO2

Place 1-chloro-3,5-dimethoxybenzene (70 g, 406 mmol) and pyridine hydrochloride (468 g, 4055 mmol) in a round bottom flask.And then refluxed and stirred at 200 C for 24 hours. When the reaction is complete,The resultant was cooled to room temperature and then poured slowly into distilled water,And the mixture was stirred for 1 hour.The solids were filtered to obtain 51.6 g (88%) of Intermediate 10 (Int-10).

According to the analysis of related databases, 7051-16-3, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Samsung Sdi Co Ltd; Kim, Changwoo; Lee, Seungjae; Kim, Hyung Sun; Ryu, Dong Wan; Shin, Chang Ju; Jang, Kipo; Jung, Sung Hyun; Jung, Juyeon; Chu, Handong; (79 pag.)TW2019/30299; (2019); A;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 821-10-3, name is 1,4-Dichlorobut-2-yne, A new synthetic method of this compound is introduced below., Product Details of 821-10-3

To a solution of compound 15G (1.0 g, 1.9 mmol, 1.0 eq) in DMF (15 mL) was added 1 ,4-dichlorobut-2-yne (490 mg, 4.0 mmol, 2.0 eq), K2C03 (800 mg, 5.8 mmol, 3.0 eq) and Nal (290 mg, 1.9 mmol, 1.0 eq). The mixture was stirred at 80 C for 3 hours before it was concentrated under reduced pressure. The residue was purified by column chromatography (hexanes/EtOAc =10/1 to 5/1 ) to give compound 62A (900 mg, 77%).ESI-MS: [M+H]+: 603

The synthetic route of 821-10-3 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; REMPEX PHARMACEUTICALS, INC.; HECKER, Scott; REDDY, Raja, K.; (198 pag.)WO2016/149393; (2016); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Reference of 1871-57-4, The chemical industry reduces the impact on the environment during synthesis 1871-57-4, name is 3-Chloro-2-chloromethyl-1-propene, I believe this compound will play a more active role in future production and life.

A solution of ieri-butyl 2- hydroxyethylcarbamate 38.1 (9.00 mL, 58.2 mmol) in DMF (50.0 mL) was cooled in a ice bath and treated portion wise with sodium hydride (60% in mineral, 5.12 g, 128 mmol) .The mixture was stirred in ice bath for 15 minutes and then treated with 3-chloro-2-(chloromethyl)prop-l-ene (7.07 mL, 61.1 mmol). After addition was complete, the ice bath was removed and the reaction mixture was stirred was stirred at room temperature overnight. The mixture was diluted with water and extracted with ether. The combined organics were dried over Na2SC>4, filtered and concentrated in vacuo to afford an oil which purified by flash chromatography (gradient EtAOAc/hexane 5%-40%) to afford the desired product (4.6, 37% yield) clear oil. LCMS 1 14.10[M – tBuCO2]+.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 3-Chloro-2-chloromethyl-1-propene, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; BIOGEN IDEC MA INC.; ERLANSON, Daniel, A.; MARCOTTE, Doug; KUMARAVEL, Gnanasambandam; FAN, Junfa; WANG, Deping; CUERVO, Julio, H.; SILVIAN, Laura; POWELL, Noel; BUI, Minna; HOPKINS, Brian, T.; TAVERAS, Art; GUAN, Bing; CONLON, Patrick; ZHONG, Min; JENKINS, Tracy, J.; SCOTT, Daniel; SUNESIS PHARMACEUTICALS, INC.; LUGOVSKOY, Alexey, A.; WO2011/29046; (2011); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 27139-97-5, name is 2-Bromo-4-chloro-1-methylbenzene, A new synthetic method of this compound is introduced below., Safety of 2-Bromo-4-chloro-1-methylbenzene

Step 1 5-chloro-2-methylbenzaldehyde To a solution of 2-bromo-4-chlorotoluene (20.0 g; 97.3 mmol) in 300 mL of THF at -78¡ã C. was added dropwise a 2.5 M solution of n-BuLi (102.2 mmol). After 30 min of stirring at that temperature, 1-formylpiperidine (11.4 mL) in 10 mL of THF was added and the solution left for 1 h. It was brought to 0¡ã C., quenched with NH4OAc (25percent) and diluted with EtOAc. The organic phase was dried over Na2SO4, filtered and the solvent removed to yield 13.3 g of the title compound. 1H NMR (CDCl3) delta2.6 (3H, s), 7.15 (1H, d), 7.4 (1H, d), 7.75 (1H, s) and 10.2 (1H, s).

The synthetic route of 27139-97-5 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Merck Frosst Canada & Co.; US6242493; (2001); B1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 928783-85-1, name is 1-Bromo-3-chloro-5-(trifluoromethyl)benzene, belongs to chlorides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 928783-85-1, Formula: C7H3BrClF3

A solution of 1-bromo-3-chloro-5-(trifluoromethyl)benzene (5.0 g), 3-hydroxypyrrolidine (1.85 g), palladium(II) acetate (217 mg), (+/-)-2,2′-bis(diphenylphosphino)-1,1′-binaphthyl (1.2 g) and cesium carbonate (18.8 g) in toluene (96 mL) was stirred under an argon gas atmosphere at 85 C. for 16 hr. After cooling to room temperature, water was added, and the mixture was extracted with ethyl acetate. The organic layer was washed with saturated brine, dried over anhydrous magnesium sulfate, and filtered. The filtrate was concentrated, and the residue was purified by silica gel column chromatography (hexane/ethyl acetate 80:20-10:90) to give the title compound (4.11 g, yield 80%) as a brown oil.1H-NMR (300 MHz, CDCl3) delta: 1.65 (d, J=3.8 Hz, 1H), 2.00-2.29 (m, 2 H), 3.19-3.32 (m, 1H), 3.38 (td, J=8.7, 3.4 Hz, 1H), 3.45-3.60 (m, 2H), 4.58-4.72 (m, 1H), 6.61 (s, 1H), 6.63-6.68 (m, 1H), 6.88 (s, 1H).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1-Bromo-3-chloro-5-(trifluoromethyl)benzene, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Kasai, Shizuo; Kamaura, Masahiro; Cho, Nobuo; US2011/251187; (2011); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Application of 19752-55-7, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 19752-55-7, name is 1-Bromo-3,5-dichlorobenzene, This compound has unique chemical properties. The synthetic route is as follows.

Add 2.2 g of 1-bromo-3,5-dichlorobenzene (0.01 mol) to the reaction flask. 2.3 g of potassium 2,2,2-trifluoroacetate (0.015 mmol), 2.3 g of iodinated ketone (0.012),1.04 g of pyridine (0.013 mol), 10 ml of N-methylpyrrolidone, refluxed at 200 C for 1 hour, and the solvent was evaporated to give a crude compound 1.94 g. Then, after mixing 10 ml of H2SO4 and 5 ml of HNO3, the crude compound 1 was slowly added at 0 C. After the reaction for 2 hours, the reaction was stopped, and the mixture was poured into ice water and suction filtered to give the desired fipronil intermediate 2.19 g in a yield of 86.2%.

The chemical industry reduces the impact on the environment during synthesis 1-Bromo-3,5-dichlorobenzene. I believe this compound will play a more active role in future production and life.

Reference:
Patent; Jiangsu Changqing Agrochemical Co., Ltd.; Yu Guoquan; Sun Xialin; Ma Changqing; Ding Huaping; (5 pag.)CN109369403; (2019); A;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 2613-34-5, name is 3-Chloro-2,4-difluoroaniline, belongs to chlorides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 2613-34-5, name: 3-Chloro-2,4-difluoroaniline

A mixture of 2,4-dichloropyrimidine (6.0 g, 40.5 mmol), 3-chloro-2,4-difluoroaniline (6.28 g, 38.5 mmol), diisopropylethylamine (9.16 ml, 52.7 mmol) and pentanol (20 ml) was refluxed for 24 hrs. After concentration under reduced pressure, the residue was dissolved in ethyl acetate and the solution washed with water, dried and concentrated. The crude material was triturated in methylene chloride and the white solid collected by filtration to give 2.1 g of the desired product. The filtrate was concentrated and purified on silica gel (10 to 50% EtOAc in petroleum ether) to give another 1.9 g of material (total yield 4.0 g, 36%). NMR Spectrum (500 MHz, DMSOd6) 6.80 (d, IH), 7.38 (ddd, IH), 7.74 (ddd, IH), 8.21 (d, IH), 9.95 (bs, IH); Mass Spectrum MH+ 276.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 3-Chloro-2,4-difluoroaniline, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; ASTRAZENECA AB; ASTRAZENECA UK LIMITED; WO2008/104754; (2008); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 139512-70-2, name is 4-Chloro-5-fluorobenzene-1,2-diamine, belongs to chlorides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 139512-70-2, category: chlorides-buliding-blocks

General procedure: A mixture of compounds 1a-l (0.013 mol) and 4-chloro-5-fluoro-ophenylenediamine(2) (0.01 mol) in methanol (10 mL) was irradiatedwith ultrasonic irradiation at 50 C for 7 min (8 min for 3a) Afterreaction completion (monitored by TLC, ethyl acetate/hexane = 3:1), themixture was poured onto water and the precipitated product was filtrated off, washed with water and recrystallised from ethanol/water, 3:1.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Article; Mente?e, Emre; Kahveci, Bahittin; Mente?e, Meltem; Journal of Chemical Research; vol. 42; 6; (2018); p. 329 – 331;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics