Category: chlorides-buliding-blocks

Synthetic Route of 367-22-6,Some common heterocyclic compound, 367-22-6, name is 4-Chloro-3-fluoroaniline, molecular formula is C6H5ClFN, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a suspension of 4-chloro-3-fluoroaniline (10.67 g, 73.3 mmol) and Na2CO3 (24.5 g, 125 mmol) in Et20 (300 ml) at -10 C under N2 was added TFAA (12.23 ml, 88 mmol) dropwise. The mixture was allowed to warm to rt for 18 h. The reaction mixturewas diluted with hexane (300 ml), and filtered. The filtrate was washed with ice-water,10% aq NaHCO3, and brine, dried over Na2SO4, and concentrated. A pale yellow solid obtained as N-(4-chloro-3-fluorophenyl)-2,2,2-trifluoroacetamide (17 g, 96 % yield). MS (ESI) m/z: 242.1 (M+H)t

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 4-Chloro-3-fluoroaniline, its application will become more common.

Reference:
Patent; BRISTOL-MYERS SQUIBB COMPANY; SMITH II, Leon M.; PINTO, Donald J. P.; CORTE, James R.; EWING, William R.; (163 pag.)WO2016/205482; (2016); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Reference of 1005-56-7, A common heterocyclic compound, 1005-56-7, name is O-Phenyl carbonochloridothioate, molecular formula is C7H5ClOS, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

6b (100 mg, 0.30 mmol) was dissolved in 5 mL of acetonitrile,4-Dimethylaminopyridine (162 mg, 1.33 mmol) andThiocarbazoformate (0.1 mL),After stirring at 0-60 C for 2-12 hours, the reaction solution was filtered,Concentrated, separated by column (n-hexane / ethyl acetate: 20/1)To give colorless oil 9 (122 mg, 0.26 mmol, 86%).

The synthetic route of 1005-56-7 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; China Pharmaceutical University; Xie Weijia; Zhang Chenxi; Wang Zihao; Wu Xiaoming; Xu Jinyi; Yao Hequan; Lin Aijun; (12 pag.)CN107043403; (2017); A;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Application of 1435-44-5,Some common heterocyclic compound, 1435-44-5, name is 1-Chloro-2,4-difluorobenzene, molecular formula is C6H3ClF2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

(3-Chloro-2,6-difluoro-phenyl)-methanol (G=Cl, G’=H. G”=F) The title compound was prepared from 1-chloro-2,4-difluoro-benzene by a procedure analogous to that for (2,6-difluoro-4-methyl-phenyl)-methanol, above. 1H NMR (400 MHz, CDCl3) delta1.90 (t, J=6.4 Hz, 1H), 4.78 (d, J=6.4 Hz, 2H), 6.87 (app. dt, J=1.8, 8.9 Hz, 1H), 7.32 (app. dt, J=5.8, 2.8 Hz, 1H) ppm.

The synthetic route of 1435-44-5 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Pfizer Inc.; US6235764; (2001); B1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

2613-34-5, name is 3-Chloro-2,4-difluoroaniline, belongs to chlorides-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Recommanded Product: 3-Chloro-2,4-difluoroaniline

Et3N (0.19 mL, 1.35 mmol) was added to 3-fluoro-1-methyl-4-[[(1R)-2,2,2-trifluoro-1-methyl-ethyl]sulfamoyl]pyrrole-2-carboxylic acid (146 mg, 0.46 mmol), HATU (218 mg, 0.57 mmol)2,4-difluoroaniline (119.8 mg, 0.92 mmol) in DMF (1 mL, 12.92 mmol) and stirred at 65Covernight. The solution was directly charged on a silica gel column and purified by column chromatography using a gradient from 10 till 100% EtOAc in heptane. The product fractions were concentrated and the residue was crystallised from methanol (10 mL) upon addition of water. The white crystals were filtered off and dried at 50C overnight, resulting in compound 312 (105 mg). Method D: Rt: 1.88 mm mlz: 428.0 (M-H) Exact mass: 429.1. Differentialscanning calorimetry: From 30 to 300 C at 10C/mm: peak at 179.4C.?H NMR (400 MHz, DMSO-d6) oe ppm 1.18 (d, J=7.0 Hz, 3 H), 3.81 (s, 3 H), 3.91 – 4.03 (m, 1 H), 7.07 – 7.14 (m, 1 H), 7.31 – 7.39 (m, 1 H), 7.54 (d, J=4.6 Hz, 1 H), 7.63 – 7.72 (m, 1 H), 8.59 (d, J=8.8 Hz, 1 H), 9.69 (s, 1 H).

The synthetic route of 2613-34-5 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; JANSSEN R&D IRELAND; VANDYCK, Koen; HACHE, Geerwin, Yvonne, Paul; LAST, Stefaan, Julien; MC GOWAN, David, Craig; ROMBOUTS, Geert; VERSCHUEREN, Wim, Gaston; RABOISSON, Pierre, Jean-Marie, Bernard; WO2014/184350; (2014); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

These common heterocyclic compound, 67952-93-6, name is 3-Chloro-4-methylbenzylamine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. HPLC of Formula: C8H10ClN

General procedure: A mixture of 2-amino-3-nitrobenzoic acid (5.0 mmol), EDCI (6.0 mmol),and HOBt (0.6 mmol) in DCM (30 mL) was stirred at room temperature for 5 mins. Then, amines (6.0 mmol) were added and the reaction was stirred at room temperature overnight. After completion, the mixture was diluted with DCM, washed with water twice, dried over anhydrous Na2SO4, evaporated, and chromatographed (EtOAc – petroleum ether) to afford the compounds 2a-k.

The synthetic route of 3-Chloro-4-methylbenzylamine has been constantly updated, and we look forward to future research findings.

Reference:
Article; Chen, Yinbo; Le, Vanminh; Xu, Xiaoyong; Shao, Xusheng; Liu, Jianwen; Li, Zhong; Bioorganic and Medicinal Chemistry Letters; vol. 24; 16; (2014); p. 3948 – 3951;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Some common heterocyclic compound, 918538-05-3, name is 2,4-Dichloropyrrolo[2,1-f][1,2,4]triazine, molecular formula is C6H3Cl2N3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. category: chlorides-buliding-blocks

To stirred solution of pyridin-4-ylmethanamine (0.086 g, 0.798 mmol) in dioxane (5 mL) was dropwise added DIPEA (0.279 mL, 1.596 mmol) and stirred for 15 mm at room temperature. To the resulting reaction mixture was added 2,4-dichloropyrrolo[2,1- J][1,2,4]triazine (0.15 g, 0.798 mmol) stirred at room temperature for 1 h. The reactionwas monitored by LC-MS. The reaction mixture was concentrated under reduced pressure. To the residue was added water (50 mL) and extracted with ethyl acetate (3×80 mL). The combined organic phase was dried over anhydrous sodium sulfate filteredevaporated. The resulting crude product was purified by silica gel flash chromatography (ethyl acetate/petroleum ether) to get 2-chloro-N-(pyridin-4-ylmethyl)pyrrolo[2, 1-J][1,2,4]triazin-4-amine (0.14 g, 0.5 18 mmol, 64.9 % yield) as a brown solid. LCMS260.0 (M+H); rt 1.8 mm; Conditions E. ?HNMR: (300 MHz, DMSO-d6) oe 9.37-9.28 (m, 1H), 8.58-8.48 (m, 2H), 7.70 (dd, J2.6, 1.5 Hz, 1H), 7.38-7.30 (m, 2H), 7.03 (dd, J4.5, 1.5 Hz, 1H), 6.67 (dd, J4.2, 2.6 Hz, 1H), 4.75 (d, J6.0 Hz, 2H).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 918538-05-3, its application will become more common.

Reference:
Patent; BRISTOL-MYERS SQUIBB COMPANY; HARIKRISHNAN, Lalgudi S.; FINK, Brian E.; BORZILLERI, Robert M.; TONUKUNURU, Gopikishan; RAHAMAN, Hasibur; WARRIER, Jayakumar Sankara; SESHADRI, Balaji; (411 pag.)WO2017/15425; (2017); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 33863-76-2, name is 1-Bromo-3-chloro-5-fluorobenzene, A new synthetic method of this compound is introduced below., category: chlorides-buliding-blocks

A 100 mL 3 -neck flask was placed under N2 and equipped with a condenser and an addition funnel. Magnesium (2.0 g, 83 mmol) were added, bromo-3-chloro- 5-fluoro benzene (15 g, 72.5 mmol) was taken up in dry THF (70 mL), and transferred to the addition funnel. The Grignard reaction was initiated with approximately 2 mL of the bromo-3-chloro -5-fluorobenzene solution and iodine. The remaining bromo-3-chloro-5-fluorobenzene solution was added and the reaction was refluxed 1 hour.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; VITAE PHARMACEUTICALS, INC.; WO2008/156817; (2008); A2;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Electric Literature of 6579-54-0, The chemical industry reduces the impact on the environment during synthesis 6579-54-0, name is 2,6-Dichlorobenzenesulfonyl chloride, I believe this compound will play a more active role in future production and life.

Synthesis Example 26 Synthesis of 2,6-Dichlorobenzenesulfonamide [Compound (III-7)] To a solution obtained by dissolving 29% aqueous ammonia (6.9 g, 20.36*5 mmol) in 40 ml of acetonitrile was added dropwise a solution of 2,6-dichlorobenzenesulfonyl chloride [Compound (XXII-7)] (5 g, 20.36 mmol) in 10 ml of acetonitrile under cooling with water. Thereafter, the reaction solution was stirred at room temperature for 3 hours and distilled off. Water was added to the residue, followed by filtration to obtain an insoluble material, which was washed with water and then with a small amount of acetonitrile. White solid, m.p.; 173-5 C., yield: 4.3 g, percent yield: 94%. IR KBr cm-1: 3382, 3268, 1575, 1428, 1338, 1143, 780. 1H-NMR (60 MHz, d6-DMSO, delta): 7.4-7.6 (3H, aromatic ring H), 7.6-7.9 (2H, bs NH2).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2,6-Dichlorobenzenesulfonyl chloride, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Kureha Kagaku Kogyo K.K.; US6610853; (2003); B1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 1939-99-7, name is Phenylmethanesulfonyl chloride, belongs to chlorides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 1939-99-7, HPLC of Formula: C7H7ClO2S

K2CO3 (8.7 g, 62 mmol) was added into a mixture of phenylmethanesulfonyl chloride (6 g, 31 mmol) and 2-bromoethanamine hydrobromide (6.4 g, 31 mmol) in DCM (100 mL) at 0 C. And the resulting mixture was stirred at r.t. for 4 hours and left standing overnight. Upon the completion of reaction, water (100 mL) was added in and DCM phase was separated. The aqueous phase was extracted with DCM. The combined organic phase was dried over Na2SO4, filtered and concentrated in vacuo to provide a crude which was separated with column chromatography (silica gel with 200-300 mesh, 0 to 50% of EtOAc in petroleum ether) to provide compound N-(2-bromoethyl)(phenyl)methanesulfonamide (7.0 g, 80%) as a pale yellow solid. 1H NMR (300 MHz, CDCl3) delta 7.40 (m, 5H), 4.58 (m, 1H), 4.29 (s, 2H), 3.34-3.29 (m, 4H). LCMS (ESI), 300, 302 [M+Na]+, Br pattern found.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; Genentech, Inc.; Fauber, Benjamin; Gobbi, Alberto; Rene, Olivier; Bodil van Niel, Monique; Gancia, Emanuela; Gaines, Simon; Laddywahetty, Tammy; Vesey, David; Ward, Stuart; Winship, Paul; US2015/197529; (2015); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

These common heterocyclic compound, 1005-56-7, name is O-Phenyl carbonochloridothioate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Formula: C7H5ClOS

A suspension of activated zinc dust (98.5 mg, 1.51 mmol) and ethyl bromodifluoroacetate (0.19 mL, 1.51 mmol) in THF (5 mL) was refluxed for 20 min and then cooled to 00C. To this, the solution of the aldehyde (+)- 39 (100 mg, 0.30 mmol) in THF (5 mL) was added. The reaction mixture was warmed to15 room temperature, followed by refluxing for 20 min, and then cooled to room temperature. The reaction mixture was poured into 1 M KHSO4 and extracted with EtOAc (3x 20 mL), washed with brine, dried over MgSO4, concentrated in vacuo, and then purified by column chromatography (10% EtOAc/hexanes) to give 84.5 mg (62%) of a 1:1 mixture of diastereomers of the desired alcohol as a colorless oil. To a solution of ethyl ester (84 mg,20 0.18 mmol) and pyridine (0.066 mL, 0.82 mmol) in CH2Cl2 (5 mL), phenyl chlorothionoformate (0.053 mL, 0.38 mmol) was added. After being stirred at room temperature for 20 hours, the reaction mixture was diluted with water, extracted with ether (3x 20 mL), washed with satd NaHCO3 solution and brine, dried over MgSO4, concentrated in vacuo, and then purified by column chromatography (5% EtOAc/hexanes) to give 97.825 mg (90%) of the desired carbonate as diastereomeric mixtures. To the solution of the resulting phenylthianocarbonate (97.5 mg, 0.16 mmol) in anhydrous benzene (10 mL), 2,2′- azobisisobutyronitrile (AlBN, 5 mg) and tributyltin hydride (0.066 mL, 0.24 mmol) were added at room temperature. After being refluxed for 3 hours, the mixture was cooled to 0 0C, diluted with water, extracted with EtOAc (3x 20 mL), washed with brine, dried over30 MgSO4, concentrated in vacuo, and then purified by column chromatography (3%EtOAc/hexanes) to give 58.2 mg (80%) of the desired difluoro ester 42 as a colorless oil: 1H NMR (400 MHz, CDCl3) delta 4.32 (q, J= 7.2 Hz, 2H), 4.03 (s, IH), 2.14-2.06 (m, IH), 1.98- 1.89 (m, 2H), 1.85-1.75 (m, 2H), 1.69-1.64 (m, IH), 1.61-1.53 (m, 2H), 1.49-1.43 (m, EPO IH), 1.38-1.34 (m, 2H), 1.35 (t, J= 7.2 Hz5 3H), 1.26-1.17 (m, 3H), 1.13-0.99 (m, 2H), 0.94 (t, J= 8.0 Hz, 9H), 0.91 (d, J= 6.0 Hz5 3H), 0.90 (s, 3H), 0.55 (q, J= 8.0 Hz, 6H).

The synthetic route of O-Phenyl carbonochloridothioate has been constantly updated, and we look forward to future research findings.

Reference:
Patent; JOHNS HOPKINS UNIVERSITY; WO2006/74227; (2006); A2;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics