Category: chlorides-buliding-blocks

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 13078-79-0, name is 2-(3-Chlorophenyl)ethanamine, A new synthetic method of this compound is introduced below., Recommanded Product: 13078-79-0

General procedure: To a solution of amine 12 (Scheme 5, 1.0 equiv) in anhydrous CH2C12 (10 mE) cooled in an ice/water bath were sequentially added triethylamine (1.1 equiv) and then carbon disulfide (1.1 equiv). The solution was stirred for 30 mm at 00 C. Afier this time, methyl iodide (1.2 equiv) was then added and the reaction was allowed to warm to room temperature and stirred overnight. The reaction mixture was then poured into 1 M H2504 and extracted with EtOAc (3×10 mE). The combined organic solutions were washed with brine, dried over anhydrous Na2504, and concentrated to afford crude material 13 which was purified by chromatography (silica, EtOAc/hexanes). The majority of the dithiocarbamates exist in tautomeric form (25% to 35%) as observed by ?H NMR, and are listed with spectral data.

The synthetic route of 13078-79-0 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; NEWLINK GENETICS CORPORATION; Mautino, Mario; Jaipuri, Firoz; Marcinowicz-Flick, Agnieszka; Kesharwani, Tanay; Waldo, Jesse; (201 pag.)US10047066; (2018); B2;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 50638-47-6, name is 4-Bromo-2-chloro-1-methoxybenzene belongs to chlorides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below. COA of Formula: C7H6BrClO

To a 5 ml of toluene solution containing 0.20 g of 3 (S) -aminopyrrolidine-1-carboxylic acid tert-butyl ester (1.1 mmol) and 0.238 g of 2-chloro-3-bromoanisole (1.1 mmol) were added 67.0 mg of BINAP (0.11 mmol), 24 mg of tris (dibenzylideneacetone) dipalladium (0.027 mmol) and 144 mg of sodium tert-butoxide (1.5 mmol). The mixture was heated under reflux under a nitrogen atmosphere at 100,C for one hour. After cooling to room temperature, the reaction solution was filtered EPO using Celite. The filtrate was concentrated under reduced pressure, and the residue was purified by silica gel column chromatography (n-hexane : ethyl acetate = 10 : 1 ? 3 : 1) . The purified product was concentrated to dryness under reduced pressure to thereby obtain 0.28 g of light yellow amorphous solid 3 (S) – (3-chloro-4-methoxyphenylamino)pyrrolidine-l-carboxylic acid tert-butyl ester. 1H-NMR(CDCl3) deltappm: 1.47(9H,s), 1.80-1.90 (IH,m) , 2.10-2.20 (lH,m) , 3.10-3.25 (IH,m) , 3.38-3.75(3H,m), 3.83(3H,s), 3.92-3.96 (IH,m) , 6.47 (IH,dd, J=2.8Hz, J=8.8Hz), 6.67 (IH, d, J=2.8Hz) , 6.81 (IH, d, J=8.8Hz) .

The synthetic route of 50638-47-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; OTSUKA PHARMACEUTICAL CO., LTD.; WO2006/121218; (2006); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 38762-41-3, name is 4-Bromo-2-chloroaniline, A new synthetic method of this compound is introduced below., name: 4-Bromo-2-chloroaniline

a Tert-butyl N-(4-bromo-2-chlorophenyl)carbamate A solution of 4-bromo-2-chloroaniline (5.00 g, 0.0242 mol) in tetrahydrofuran (50 mL) was reacted with a 1.0 M solution of sodium bis(trimethylsilyl)amide in tetrahydrofuran (53.2 mL, 0.0532 mol). The mixture was stirred 15 minutes at ambient temperature. Di-tert-butyl dicarbonate (6.34 g, 0.0290 mol) was added and the solution was stirred for 2 hours. The solvent was removed in vacuo, and the crude material was purified by flash column chromatography on silica using heptane /ethyl acetate (4:1). The solvent was removed in vacuo to give tert-butyl N-(4-bromo-2-chlorophenyl)carbamate as a white solid (4.214 g, 0.0137 mol). 1H NMR (DMSO-d6, 400 MHz) delta 8.75 (s, 1H), 7.71 (d, 1H), 7.54 (d, 1H), 7.50 (dd, 5H), 1.46 (s, 9H); TLC (heptane/ethylacetate 4:1) Rf 0.54.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Abbott Laboratories; US2002/156081; (2002); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Reference of 348-59-4,Some common heterocyclic compound, 348-59-4, name is 2,5-Dichlorofluorobenzene, molecular formula is C6H3Cl2F, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

EXAMPLE 19 2-[3-(2,5-Dichloro-phenoxy)4-ethyl-phenyl]-N-(4-sulfamoyl-phenyl)-acetamide (I-19) step 1-To a solution of 12a (0.200 g; 0.960 mmol) and NMP (4 mL) was added K2CO3 (0.398 g; 2.88 mmol) and 1,4-dichloro-2-fluoro-benzene (0.124 mL; 1.056 mmol). The reaction was heated to 120 C. and monitored by TLC. After 8 h the reaction was cooled to RT and 10% HCl was added. The mixture was extracted with EtOAc and the combined extracts were washed with H2O and brine. The extracts were dried (Na2SO4) filtered and evaporated. The crude product was purified by SiO2 chromatography eluding with a gradient of hexane/EtOAc (100:0 to 60:40) to afford 142. steps 2 and 3-Hydrolysis and formation of the acid chloride were carried as described in step 7and 8 of Example 1 and used without additional purification. step 4-The acid chloride from step 3 (0.415 mmol) was dissolved in acetone (2 mL) and the flask and purged with nitrogen. NaHCO3 (0.070 g; 0.83 mmol) was added followed by 4-amino-benzenesulfonamide (0.072 g; 0.415 mmol) and water (4 mL). The mixture was sonicated for 5 min and allowed to stir for 12 h at RT. The reaction mixture was filtered and the crude product was washed sequentially with water and diethyl ether to afford I-19 Compound I-21 was prepared in the same manner except 4-amino-benzenesulfonamide was replaced with 2-chloro-phenylamine.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 2,5-Dichlorofluorobenzene, its application will become more common.

Reference:
Patent; Roche Palo Alto LLC; US2005/239880; (2005); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Synthetic Route of 1939-99-7, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 1939-99-7, name is Phenylmethanesulfonyl chloride, This compound has unique chemical properties. The synthetic route is as follows.

K2CO3 (8.7 g, 62 mmol) was added into a mixture of phenylmethanesulfonyl chloride (6 g, 31 mmol) and 2-bromoethanamine hydrobromide (6.4 g, 31 mmol) in DCM (100 mL) at 0 C. And the resulting mixture was stirred at r.t. for 4 hours and left standing overnight. Upon the completion of reaction, water (100 mL) was added in and DCM phase was separated. The aqueous phase was extracted with DCM. The combined organic phase was dried over Na2SO4, filtered and concentrated in vacuo to provide a crude which was separated with column chromatography (silica gel with 200-300 mesh, 0 to 50% of EtOAc in petroleum ether) to provide compound N-(2-bromoethyl)(phenyl)methanesulfonamide (7.0 g, 80%) as a pale yellow solid. 1H NMR (300 MHz, CDCl3) delta 7.40 (m, 5H), 4.58 (m, 1H), 4.29 (s, 2H), 3.34-3.29 (m, 4H). LCMS (ESI), 300, 302 [M+Na]+, Br pattern found.

The chemical industry reduces the impact on the environment during synthesis Phenylmethanesulfonyl chloride. I believe this compound will play a more active role in future production and life.

Reference:
Patent; Genentech, Inc.; Fauber, Benjamin; Gobbi, Alberto; Rene, Olivier; van Niel, Monique Bodil; Gancia, Emanuela; Gaines, Simon; Ladduwahetty, Tammy; Vesey, David; Ward, Stuart; Winship, Paul; (101 pag.)US2016/168141; (2016); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 62356-27-8 as follows. name: 1-Bromo-3-chloro-2-methylbenzene

EXAMPLE 175 6-(3-chloro-2-methylphenyl)-1,2-dihydro-2,2,4-trimethylquinoline (Compound 275, Structure 4 of Scheme II, where R1 =3-chloro-2-methylphenyl) This compound was prepared according to General Method 2 (EXAMPLE 9) from Compound 9 (70.0 mg, 0.22 mmol) and 2-bromo-6-chlorotoluene (45.2 mg, 0.22 mmol). The crude material was purified by flash column chromatography (75 ml silica, hexane to 5% ethyl acetate/hexane) to afford 63.1 mg (96%) of Compound 275. Data for Compound 275: 1 H NMR (400 MHz, acetone-d6) 7.30 (d, J=8.3, 1 H), 7.16 (m, 1 H), 6.95 (s, 1 H), 6.87 (d, J=10.2, 1 H), 6.54 (d, J=8.0, 1 H), 5.36 (s, 1 H), 5.25 (s, 1 H), 2.03 (s, 3 H), 1.28 (s, 6 H).

According to the analysis of related databases, 62356-27-8, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Ligand Pharmaceuticals Incorporated; US5693646; (1997); A;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Synthetic Route of 870-24-6, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 870-24-6, name is 2-Chloroethanamine hydrochloride belongs to chlorides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

A stirred solution of 2-chloroethylamine hydrochloride (l.OOg, 8.62mmol) and Et3N (3.60ml, 25.9mmol) in dry DCM (25ml) at 0C was treated with a solution of nosyl chloride (1.91g, 8.62mmol) in dry DCM (25ml) dropwise. On complete addition, the solution was warmed to ambient temperature and stirred overnight. The solution was evaporated and the residue purified by column chromatography (Si02, 20% EtOAc to 30% EtOAc in cyclohexane) to afford the title compound as a white solid (2.03g, 89%). XH NM (400 MHz, DMSO-d6) delta 8.45 – 8.38 (m, 3H), 8.09 – 8.04 (m, 2H), 3.59 (t, J = 6.0 Hz, 2H), 3.17 (s, 2H).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-Chloroethanamine hydrochloride, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; AB SCIENCE; BENJAHAD, Abdellah; MARTIN, Jason; SCHALON, Claire; PEZ, Didier; CHEVENIER, Emmanuel; SANDRINELLI, Franck; PICOUL, Willy; MOUSSY, Alain; WO2015/144614; (2015); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Electric Literature of 6940-78-9,Some common heterocyclic compound, 6940-78-9, name is 1-Bromo-4-chlorobutane, molecular formula is C4H8BrCl, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Preparation of 4-Methyl-l,2,4-triazine-3,5(2H,4H)-dione2-Acetyl-l,2,4-triazine-3,5(2H,4H)-dione (10 g, 64.5 mmol) was added portionwise over 40 min to a suspension of sodium hydride (3.09 g, 60wt suspension in oil, 77.4 mmol) in DMF (160 mL) and stirred vigorously for 45 min. Iodomethane (4.41 mL, 10.1 g, 70.9 mmol) was added and the whole mixture stirred at ambient temperature for 66 h under a dry nitrogen atmosphere. A slight ppt remained but this disappeared on warming to evaporate the solvent. The residue was dissolved in EtOH (200 mL) and /rara-toluenesulfonic acid monohydrate (1.4 g, -10 mol ) was added and the yellow solution refluxed for 2 h before allowing to cool. Solvent was evaporated and toluene (275 mL) added with heating. After standing overnight, solid was filtered off. The crude solid was suspended in EtOAc (250 mL) and stirred overnight to dissolve out sodium iodide, then filtered off to give 4-methyl-l,2,4-triazine-3,5(2H,4H)-dione (4.9 g, 60%).1H NMR (300 MHz, DMSO-d6) 5 3.10 (3H, s, CH3), and 7.48 (lH, s, CH). 13C NMR (75 MHz, DMSO-d6) delta 25.6 (CH3), 134.4 (CH), 149.4 (NHC(=0)CH), and 156.5 (NHC(=0)NH).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 1-Bromo-4-chlorobutane, its application will become more common.

Reference:
Patent; GE HEALTHCARE LIMITED; MEDI-PHYSICS, INC.; NEWINGTON, Ian, Martin; WYNN, Duncan George; NAIRNE, Robert James Domett; GUILBERT, Benedicte; MANDAL, Subrata; JINTO, Jose; VARADARAJAN, Sunderaraman; RANGASWAMY, Chitralekha; BETTS, Helen; DAVIS, Rebecca; WO2011/150183; (2011); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Related Products of 367-22-6, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 367-22-6 name is 4-Chloro-3-fluoroaniline, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

At 0 C, to a mixture of 4-chloro-3-fluoroaniline (7 g, 48.1 mmol) in DCM (100 mL) was added pyridine (7.8 mL, 96 mmol), followed by phenyl carbonochloridate (6.3 mL, 50.5 mmol). The mixture was stirred at 0 C for 1 h, then warmed up to rt overnight. The mixture was washed with IN HCl and back extracted with DCM. The combined organics were washed with brine, dried over anhydrous Na2SO4, and filtered. The filtrate was concentrated to give phenyl (4-chloro-3-fluorophenyl)carbamate (12 g, 45.2 mmol, 94 % yield) as a colorless solid. The crude product was used without further purification.LC/MS (ESI): m/z 266.1 (M+H)+, 1.13 min (ret. time).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 4-Chloro-3-fluoroaniline, and friends who are interested can also refer to it.

Reference:
Patent; GLAXOSMITHKLINE INTELLECTUAL PROPERTY DEVELOPMENT LIMITED; BAILEY, James; CHEN, Yao; HURLE, Mark; LEACH, Craig; TURUNEN, Brandon; (103 pag.)WO2018/134731; (2018); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Electric Literature of 1127-85-1, A common heterocyclic compound, 1127-85-1, name is 2,4-Dichloro-5,6,7,8-tetrahydroquinazoline, molecular formula is C8H8Cl2N2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Step C: Synthesis of (2-chloro-5,6,7,8-tetrahydro-quinazolin-4-yl)-methyl-amine. To a solution of 2,4-dichloro-5,6,7,8-tetrahydro-quinazolin (8.70 g, 42.8 mmol) in THF (87 mL) was added 40% aqueous MeNH2 (8.32 g, 107 mmol). The mixture was stirred at ambient temperature for 8 hr. The solution was poured into saturated aqueous NaHCO3 and the aqueous layer was extracted with CHCl3 (three times). The combined organic layer was dried over MgSO4, filtrated, concentrated, and purified by flash chromatography (NH-silica, 50% EtOAc in hexane) to give (2-chloro-5,6,7,8-tetrahydro-quinazolin-4-yl)-methyl-amine (7.04 g, 83%) as a white solid. ESI MS m/e 220, M + Na+; 1H NMR (300 MHz, CDCl3) delta 1.74-1.92 (m, 4 H), 2.26 (t, J= 5.5 Hz, 2 H), 2.67 (t, J= 5.6 Hz, 2 H), 3.05 (d, J= 5.0 Hz, 3 H), 4.81 (s, 1 H).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Taisho Pharmaceutical Co. Ltd.; Arena Pharmaceuticals, Inc.; EP1464335; (2004); A2;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics