Category: chlorides-buliding-blocks

60811-21-4,Some common heterocyclic compound, 60811-21-4, name is 4-Bromo-2-chloro-1-fluorobenzene, molecular formula is C6H3BrClF, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a solution of dissoprppylamine (5.1 mL, 36.0 mmol, 1.5 eq.) in anhydrous THF (15 mL) was added n-BuLi (19.2 mL, 28.8 mmol, 1.2eq.) dropwise at -78C under N2 atmosphere, then was added the 4-bromo-2-chloro-l-fluorobenzene (5 g, 24.0 mmol, 1.0 eq.) at -78C 1 h later. The mixture was stirred at -78C for 45 minutes, then was added DMF (2.8 mL, 36.0 mmol, 1.5 eq. ), warmed to -30C until TLC showed that the reaction was completed. The reaction was quenched with H20 (100 mL), then adjusted to pH 2-3, extracted with EA (50 mLx3). The combined organic layers were washed with brine, dried over anhydrous Na2S04 and evaporated. The residue was purified by column chromatography (PE/EA=100: 1) to provide 5-bromo-3-chloro-2-fluoroben low solid.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 4-Bromo-2-chloro-1-fluorobenzene, its application will become more common.

Reference:
Patent; LIFESCI PHARMACEUTICALS, INC.; MCDONALD, Andrew; QIAN, Shawn; (297 pag.)WO2018/229543; (2018); A2;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Reference of 33863-76-2,Some common heterocyclic compound, 33863-76-2, name is 1-Bromo-3-chloro-5-fluorobenzene, molecular formula is C6H3BrClF, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Preparation 5 TERT-BUTYL 3-(3-CHLORO-5-FLUOROPHENYL)-3-HYDROXYPYRROLIDIN-1-CARBOXYLATE To a solution of 1-bromo-3-chloro-5-fluorobenzene (4.0 g, 19.1 mmol) in dry tetrahydrofuran (40 mL), under nitrogen, was added magnesium turnings (0.47 g, 21.0 mmol) and a small piece of iodine. The mixture was heated with a heat-gun until the colour disappeared and then stirred at ambient temperature for 0.5 h after which a solution of 1-N-boc-3-pyrrolidinone (2.8 g, 15.3 mmol) in dry tetrahydrofuran (10 mL) was added drop wise. The reaction mixture was stirred for 0.5 h at ambient temperature and then quenched with water (70 mL). Aqueous saturated ammonium chloride (20 mL) was added and the mixture was extracted with ethyl acetate (2*100 mL). The combined organic phase was dried (MgSO4), filtered and evaporated. Purification by flash column chromatography on silica gel (ethyl acetate/isooctane, 1:1) gave the title compound (2.43 g). MS m/z (rel. intensity, 70 eV) 315 (M+, 1), 259 (14), 214 (22), 184 (13), 143 (11), 57 (bp).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 1-Bromo-3-chloro-5-fluorobenzene, its application will become more common.

Reference:
Patent; NSAB, FILIAL AF NEUROSEARCH SWEDEN AB; US2010/179211; (2010); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Related Products of 2613-34-5, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 2613-34-5, name is 3-Chloro-2,4-difluoroaniline belongs to chlorides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

(R)- 1,5 -dimethyl-4-(N-( 1,1,1 -trifluoropropan-2- yl)sulfamoyl)-1H-pyrrole-2-carboxylic acid (450 mg, 1.43 mmol) and 3-chloro-4,5- difluoroaniline hydrochloride (0.57 g, 2.86 mmol) (synthesis described in synthesis for compound 57) and HATU (0.73 g, 1.91 mmol) were dissolved in DMF (2 mL) containingdiisopropylethylamine (0.82 mL, 4.77 mmol). The reaction mixture was stirred at 40C for 66 hours. The reaction mixture was directly loaded on column. The reaction mixture was purified using silica gel column chromatography (ethyl acetate in heptane from 20 to 80%). The desired fractions were combined and evaporated to keep 50 mL of solvent. The precipitates were filtered and washed with petroleum ether and dried in vacuum oven at 50C overnight to affordcompound 137 (490 mg) as white powder.(R)- 1,5 -dimethyl-4-(N-( 1,1,1 -trifluoropropan-2-yl)sulfamoyl)- 1 H-pyrrole-2-carboxylic acid (168mg, 0.53 mmol) (synthesis described in synthesis for compound 137) 5-amino-2-fluorobenzonitrile (0.15 g, 1.07 mmol) and HATU (0.24 g, 0.64 mmol) were dissolved in DMF (1 mL) containing diisopropylethylamine (0.23 mL, 1.34 mmol). The reaction mixture was stirred at 50C for 1 hour. The reaction mixture was purified using silica gel column chromatography (ethyl acetate in heptane from 20 to 80%). The desired fractions were combinedand evaporated to keep 50 mL of the solvent. The white solids were filtered and dried invacuum oven to afford compound 140 (180 mg) as white powder.Compound 143 (147 mg) as white powder was synthesized similarly as described for compound140 using 3-chloro-2,4-difluoroaniline (0.17 g, 1.07 mmol) instead of 5-amino-2-fluorobenzonitrile. The reaction mixture was stirred at 60C for 2 hours more. Method B; Rt:1.07 mi mlz: 458 (M-H) Exact mass: 459.04. ?H NMR (400 MHz, DMSO-d6) oe ppm 1.09 (d,J7.0 Hz, 3 H), 2.44 (s, 3 H), 3.82 (s, 3 H), 3.76 – 3.91 (m, 1 H), 7.34 (td, J=9.0, 2.0 Hz, 1 H),7.35 (s, 1 H), 7.52 (td, J8.7, 5.8 Hz, 1 H), 8.20 (br. s., 1 H), 10.05 (s, 1 H).

The synthetic route of 3-Chloro-2,4-difluoroaniline has been constantly updated, and we look forward to future research findings.

Reference:
Patent; JANSSEN R&D IRELAND; VANDYCK, Koen; HACHE, Geerwin, Yvonne, Paul; LAST, Stefaan, Julien; MC GOWAN, David, Craig; ROMBOUTS, Geert; VERSCHUEREN, Wim, Gaston; RABOISSON, Pierre, Jean-Marie, Bernard; WO2014/184350; (2014); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Related Products of 20850-43-5,Some common heterocyclic compound, 20850-43-5, name is 5-(Chloromethyl)benzo[d][1,3]dioxole, molecular formula is C8H7ClO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a slurry of magnesium turnings (1.09 g, 44.8 mmol) in 5 mL of THF was added iodine (0.0650 g, 0.256 mmol), followed by a solution of 5-(chloromethyl)benzo[d][l,3]dioxole (6.55 g, 38.4 mmol) in 30 mL of THF. After 1 minute, the exothermic reaction mixture was placed in an ice bath for 1 minute and then stirred at ambient temperature for 1 hour. TMEDA (7.68 ml, 51.2 mmol) was added to the reaction and the mixture was cooled to -78 0C for 5 minutes at which point a solution of (E)-N-((S)-2,3-bis(tert- butyldimethylsilyloxy)propylidene)-2-methylpropane-2-sulfinamide (5400 mg, 12.8 mmol) in 25 mL THF was added via a syring pump over 15 minutes. The reaction was allowed to warm to RT over the course of 2 hours then stirerd at RT for an additional hour. The mixture was diluted with ethyl acetate (100 mL) and poured in saturated ammonium chloride (250 mL). The aqueous layer was extracted with ethyl acetate (2 x 250 mL) and the combined organic layers were washed with water and then brine and dried over Na2SO4. The organic colvents were filtered, concentrated under reduced pressure and the crude material was purified by silica gel to provide N-((2R,3S)-1- (benzo[d][l,3]dioxol-5-yl)-3,4-bis(tert-butyldimethylsilyloxy)butan-2-yl)-2- methylpropane-2-sulfinamide (4.51 g, 63.1% yield) as a colorless oil.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 5-(Chloromethyl)benzo[d][1,3]dioxole, its application will become more common.

Reference:
Patent; AMGEN INC.; WO2009/64418; (2009); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Synthetic Route of 63624-28-2, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 63624-28-2, name is 2,4-Dimethoxybenzene-1-sulfonyl chloride belongs to chlorides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

Example 24:Methyl 3-(5-(4-(2,4-dimethoxyphenylsulfonamido)phenyl)thiazol-2-yl) propanoate The compound of example 5 (100 mg) was dissolved in methylene chloride (2 mL) to which pyridine (0.061 mL) was added and the reaction mixture was stirred for 5 min. To this reaction mixture, 2,4-dimethoxybenzene-1 -sulfonyl chloride (0.135 g) was added and the reaction mixture was stirred for 16 h. Water was added into the reaction mixture and the reaction mixture was neutralized with dilute hydrochloric acid. The organic layer was washed with water and dried over anhydrous Na2S04. The solvent was evaporated to obtain an oil, which was purified by column chromatography (silicagel, EtOAc in chloroform) to obtain a solid, which was crystallized using EtOAc in petroleum ether to afford the title compound. Yield: 153 (86 %); 1H NMR (DMSO-d6, 300MHz): delta 10.07 (s, 1 H), 7.88 (s, 1 H), 7.71 (d, 1 H), 7.44 (d, 2H), 7.12 (d, 2H), 6.63 (d, 1 H), 6.57 (dd, 1 H), 3.86 (s, 3H), 3.78 (s, 3H), 3.59 (s, 3H), 3.22 (t, 2H), 2.79 (t, 2H); MS: m/z 463 (M+1 ).

The synthetic route of 2,4-Dimethoxybenzene-1-sulfonyl chloride has been constantly updated, and we look forward to future research findings.

Reference:
Patent; PIRAMAL LIFE SCIENCES LIMITED; SHARMA, Rajiv; KADAM, Kishorkumar Shivajirao; JADHAV, Ravindra Dnyandev; KANDRE, Shivaji Sadashiv; GUPTE, Amol; WO2012/29032; (2012); A2;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Reference of 883499-24-9, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 883499-24-9, name is 1-Bromo-2-chloro-3-fluorobenzene, This compound has unique chemical properties. The synthetic route is as follows.

5.3) 1-Benzylsulfanyl-3-bromo-2-chloro-benzene (intermediate 16): To stirred phenyl-methanethiol (14.8 g, 119,36 mmol) in 175 ml DMF was added Cs2CO3 (38.89 g, 119.36 mmol) under argon. After 10 min 1-bromo-2-chloro-3-fluoro- benzene (25 g, 119.36 mmol) in 25 ml DMF was added and stirring was continued overnight at RT and then 3 h at 800C. After cooling the mixture was diluted with ethyl acetate/water and washed subsequently with 1 N HCI and brine. The organic layer was dried with MgSO4, filtered and evaporated. Purification by chromatography on silica gel yielded 22 g (59 %) as an amorphous, colourless solid.

The chemical industry reduces the impact on the environment during synthesis 1-Bromo-2-chloro-3-fluorobenzene. I believe this compound will play a more active role in future production and life.

Reference:
Patent; SANOFI-AVENTIS; WO2009/103440; (2009); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Reference of 7051-16-3,Some common heterocyclic compound, 7051-16-3, name is 1-Chloro-3,5-dimethoxybenzene, molecular formula is C8H9ClO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A solution of 1-chloro-3,5-dimethoxybenzene (5 g, 29.0 mmol) and TMEDA (4.37 mL, 29.0 mmol) in diethyl ether (100 mL, 962 mmol) at -78 C under N2 atmosphere was charged with BuLi (19.91 mL, 31.9 mmol) dropwise over a period of 30 minutes using a syringe pump. After stirring for 4 hours at -78 C, DMF was added and the reaction mixture continued to stir for 1.5 hours after which 1N HCl (~30 mL) was added (all at -78 C). The reaction mixture was warmed to room temperature and extracted withy ethyl acetate. The organic phase was dried (MgSO4), filtered and concentrated to dryness. The residue was purified by ISCO using hexanes/EtOAc as eluent. Fractions containing the desired product were concentrated to dryness to give the title material (1.97 g, 9.82 mmol, 33.9% yield) as a light yellow solid. LC (Method B): 1.924 min. LCMS (APCI): calcd for C9H10ClO3 [M+H]+ m/z 201.03, found 201.0. 1H NMR (CDCl3, 400 MHz): delta ppm 10.28 (s, 1H), 6.87 (s, 2H), 3.86 (s, 6H).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 1-Chloro-3,5-dimethoxybenzene, its application will become more common.

Reference:
Patent; BRISTOL-MYERS SQUIBB COMPANY; UNIVERSITE DE MONTREAL; PRIESTLEY, Eldon Scott; POSY, Shoshana L.; TREMBLAY, Francois Tremblay; MARTEL, Alain; MARINIER, Anne; WO2013/163241; (2013); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Electric Literature of 41965-95-1, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 41965-95-1, name is 3-Chloro-4-methoxybenzylamine Hydrochloride belongs to chlorides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

9-((3-chloro-4-methoxybenzyl)amino)-2-ethyl-7-methoxy-2,3-dihydro-lH- pyrrolo[3,4-b]quinolin-l-one L [00289] A solution of 43 (0.11 mmol), 3-chloro-4-methoxybenzylamine hydrochloride (0.16 mmol) and (‘pr)2NEt (0.66 mmol) in n-propanol (1.5 mL) was heated to 90 C for lh. The solvent was evaporated off and the residue was purified by flash chromatography (AcOEt: MeOH 19: 1) to give the final product L. MS ESI (m/z) 412 (M+H)+; 1H NMR (400 MHz, CDC13) delta 8.14 (t, 1H, J=6.4 Hz), 7.85 (d, 1H, J=9.6 Hz), 7.48 (d, 1H, J=2.4 Hz), 7.37-7.29 (m, 3H), 6.95 (d, 1H, J=8.8 Hz), 4.95 (d, 2H, J=6.8 Hz), 4.38 (s, 2H), 3.90 (s, 3H), 3.66 (q, 2H, J=7.2 Hz), 3.59 (s, 3H), 1.28 (t, 3H, J=7.2 Hz)

The synthetic route of 3-Chloro-4-methoxybenzylamine Hydrochloride has been constantly updated, and we look forward to future research findings.

Reference:
Patent; THE TRUSTEES OF COLUMBIA UNIVERSITY IN THE CITY OF NEW YORK; LANDRY, Donald, W.; DENG, Shixian; FIORITO, Jole; ARANCIO, Ottavio; WASMUTH, Andrew; WO2015/9930; (2015); A2;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Electric Literature of 2533-69-9, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 2533-69-9, name is Methyl 2,2,2-trichloroacetimidate belongs to chlorides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

Step B4-bromo-6-( 1, 1-dimethylethyl)-2-(trichloromethyl)- 1H-benzimidazole[00244] 3-bromo-5-(1 ,1-dimethylethyl)-1 ,2-benzenediamine (1.2 g, 4.9 mmol) was dissolved in acetic acid (25 mL) and methyl 2,2,2-trichloromethylacetimidatate (0.94 mL, 7.4 mmol) was added drop-wise. The reaction was stirred for 3 hours. The mixture was diluted with ethyl ether and washed with water. The aqueous layer was extracted again with ether. The combined organic layers were washed with water, washed with brine, dried over sodium sulfate, and concentrated to give the title compound (0.91 g, 50%). LCMS: m/z 369, 371 , 373 (M+1).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, Methyl 2,2,2-trichloroacetimidate, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; GLAXOSMITHKLINE LLC; BANKA, Anna; CATALANO, John G; FANG, Jing; PEAT, Andrew James; TAI, Vincent; TURNER, Elizabeth; WO2011/97491; (2011); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 39989-43-0, name is 3,5-Dichlorobenzylamine, belongs to chlorides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 39989-43-0, Recommanded Product: 39989-43-0

EXAMPLE 125 8-hydroxy-6-methyl-[1,6]naphthyridine-7-carboxylic acid 4-fluoro-benzylamide (125) In a manner similar to that for the compound 124H in Example 124, Step 8, substituting 3,5-dichlorobenzylamine with 4-fluorobenzylamine in Step 8, 8-hydroxy-6-methyl-[1,6]naphthyridine-7-carboxylic acid the 4-fluoro-benzylamide (125) was prepared. 1H NMR (400 MHz, CD3OD) delta 9.10 (d, 1H), 8.72 (d, 1H), 7.84 (dd, 1H), 7.43 (dd, 2H), 7.06 (t, 2H), 4.64 (s, 2H), 2.88 (s, 3H).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; Anthony, Neville J.; Gomez, Robert P.; Young, Steven D.; Egbertson, Melissa; Wai, John S.; Zhuang, Linghang; Embrey, Mark; Tran, LeKhanh; Melamed, Jeffrey Y.; Langford, H. Marie; Guare, James P.; Fisher, Thorsten E.; Jolly, Samson M.; Kuo, Michelle S.; Perlow, Debra S.; Bennett, Jennifer J.; Funk, Timothy W.; US2003/55071; (2003); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics