Category: chlorides-buliding-blocks

These common heterocyclic compound, 94-97-3, name is 5-Chloro-1H-benzo[d][1,2,3]triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Recommanded Product: 5-Chloro-1H-benzo[d][1,2,3]triazole

a) A mixture of 5 g of 5-chlorobenzotriazole, 1.4 g of chloroacetone, 5.1 g of potassium carbonate and 0.5 g of potassium iodide is stirred into 50 mi of acetone at room temperature for 48 h. The mixture is subsequently filtered, the filtrate concentrated by evaporation in a vacuum, and the residue purified by flash chromatography. In this way, two isomeric products, [1- (5-CHLOROBENZOTRIAZOL-1-YI)-PROPAN-2-ONE] and [1-(6-CHLOROBENZOTRIAZOL-1-YL)-] propan-2-one, are isolated in approximately the same quantities, the first of which is then used directly in the next step.

The synthetic route of 5-Chloro-1H-benzo[d][1,2,3]triazole has been constantly updated, and we look forward to future research findings.

Reference:
Patent; NOVARTIS AG; NOVARTIS PHARMA GMBH; WO2004/24704; (2004); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 1996-29-8, name is 1-Bromo-4-chloro-2-fluorobenzene, belongs to chlorides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 1996-29-8, 1996-29-8

EXAMPLE 13 (3R,4S)-4-(4′-Chloro-2′-fluorobiphenyl-4-yloxy)-1-pyridin-3-yl-pentan-3-ol Prepared according to the method described in Example 12b) from (1S,2R)-4-[2-(tert-butyldimethylsilanyloxy)-1-methyl-4-pyridin-3-ylbutoxy]benzeneboronic acid (0.20 g, Example 11)), 1-bromo-4-chloro-2-fluorobenzene (0.21 g), 2M aqueous sodium carbonate (0.57 ml) and tetrakis(triphenylphosphine)palladium (0) (0.1 g) in toluene (5 ml) and ethanol (2 ml). The reaction mixture was heated at 100 C. for 4 hours. After cooling, the solution was concentrated under reduced pressure. Concentrated hydrochloric acid (1 ml) was added to a solution of the residue in methanol (5 ml) and the suspension was stirred at room temperature for 6 hours. After work up, the residue was purified by normal-phase HPLC eluding with a gradient of 0-25% ethanol in dichloromethane to give an oil (0.13 g). MS (APCI) 386 (M+H)+ 1H-NMR(CDCl3) 8.51(1H,d); 8.45(1H,dd); 7.56-7.54(1H,m); 7.43(2H,dd); 7.33(1H,t); 7.26-7.15(3H,m); 6.94(2H,d); 4.41-4.37(1H,m); 3.87-3.86(1H,m); 3.0-2.95(1H,m); 2,80-2.75(1H,m); 2.15(1H,d); 1.87-1.84(2H,m); 1.31 (3H,d).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1-Bromo-4-chloro-2-fluorobenzene, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; AstraZeneca AB; US6300352; (2001); B1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Reference of 112-26-5, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 112-26-5, name is 1,2-Bis(2-chloroethoxy)ethane belongs to chlorides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

The synthesis of benzoaza-12-crown-4 is based on the condensation process of o-aminophenol with triethylene glycol dichloride in the presence of sodium hydroxide in the isopropanol medium. 17.4 g of o-aminophenol (0.16 mol) and 12.6 g of sodium hydroxide in 200 ml of isopropanol are placed into a flask, mechanically stirred, and kept at a temperature of 60 C for 60 min. After this 25 ml (0.16 mol) of triethylene glycol dichloride are dropped. The reaction mixture is kept boiling for 20 h. Then the mixture is cooled, acidified with hydrochloric acid to pH 3-4, filtered from inorganic impurities, alkalized with 25% ammonium hydroxide to pH 8-9, and evaporated on a rotary evaporator. The technical product obtained is distilled under vacuum and the high-boiling fraction is separated at a temperature of 150 C and pressure of 6 mm of mercury. The fraction is placed into a sealed vessel and kept at room temperature until the substance transition to the crystalline state. After crystallization the crystals are isolated, washed with acetone, and dried in the air. The product yield is 49 %.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1,2-Bis(2-chloroethoxy)ethane, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Glushko; Sadovskaya; Blokhina; Anan’Ev; Journal of Structural Chemistry; vol. 56; 1; (2015); p. 142 – 147; Zh. Strukt. Kim.; vol. 56; 1; (2015); p. 149 – 154,6;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Electric Literature of 13526-66-4, These common heterocyclic compound, 13526-66-4, name is 3-Bromo-6-chloroimidazo[1,2-b]pyridazine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

13.9 g (59.8 mmol) 3-bromo-6-chloro-imidazo[1 ,2-6]pyridazine were suspended in 508 mL 1 ,4-dioxane. 10, 1 g (62.8 mmol) 2-benzofuranylboronic acid, 2.76 g (2.29 mmol) tetrakis(triphenylphosphino)palladium-(0) and 19.0 g (179 mmol) sodium carbonate were added. The obtained mixture was heated to 100 C for 24 h.400 mL of a saturated aqueous ammonium chloride solution were added. The obtained mixture was extracted with ethyl acetate. The combined organic layers were washed with brine and dried over magnesium sulfate. After evaporation of the solvent, the obtained solid material was digested in 40 mL of a mixture of dichioromethane and methanol (8:2), filtered off and dried in vacuo to yield 5.42 g (44%) of the title compound as solid material. 1H-NMR (300 MHz, DM50-d6): delta [ppm]= 7.23 – 7.40 (m, 2H), 7.51 (d, 1 H), 7.59 – 7.67 (m, 2H), 7.77 (d, 1 H), 8.33 – 8.40 (m, 2H).LCM5 (Method 1 ): Rt = 1 .35 min; MS (ESIpos) m/z = 270 [M+H]

Statistics shows that 3-Bromo-6-chloroimidazo[1,2-b]pyridazine is playing an increasingly important role. we look forward to future research findings about 13526-66-4.

Reference:
Patent; BAYER INTELLECTUAL PROPERTY GMBH; KNUT, Eis; PUeHLER, Florian; ZORN, Ludwig; SCHOLZ, Arne; LIENAU, Philip; GNOTH, Mark; BOeMER, Ulf; GUeNTHER, Judith; FANGHAeNEL, Joerg; KORR, Daniel; WO2012/163942; (2012); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

These common heterocyclic compound, 2106-02-7, name is 2-Chloro-4-fluoroaniline, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Recommanded Product: 2106-02-7

Into a 20-L 4-neck round flask was placed a solution of 2-chloro-4- fluorobenzenamine (1300 g, 8.82 mol, 1.00 equiv, 99%) in toluene (10 L), 4- methylbenzenesulfonic acid (3.1 g, 17.84 mmol, 99%), and hexane-2,5-dione (1222.5 g, 10.62 mol, 1.20 equiv, 99%). The resulting solution was heated to reflux for 1 h in an oil bath and cooled. The pH value of the solution was adjusted to 8 with sodium carbonate (1 mol/L). The resulting mixture was washed with 1×5000 mL of water and concentrated under vacuum. The crude product was purified by distillation and the fraction was collected at 140 0C to afford l-(2- chloro-4-fluorophenyl)-2,5-dimethyl-lH-pyrrole (1700 g, yield: 85%).

The synthetic route of 2-Chloro-4-fluoroaniline has been constantly updated, and we look forward to future research findings.

Reference:
Patent; ARRAY BIOPHARMA INC.; GENENTECH, INC.; ALIAGAS, Ignacio; GRADL, Stefan; GUNZNER, Janet; MATHIEU, Simon; RUDOLPH, Joachim; WEN, Zhaoyang; WENGLOWSKY, Steven Mark; WO2011/25947; (2011); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 112581-77-8 as follows. Computed Properties of C6H3Cl2N3

Reference Example 1 Into a 500 mL four-necked separable flask purged with nitrogen, 20.17 g of 2,6-dichloroimidazo[1,2-b]pyridazine (content: 99.2% by weight) and 190.5 g of xylene were charged to prepare a xylene solution containing 2,6-dichloroimidazo[1,2-b]pyridazine. The solution obtained by mixing 4 mL of xylene and 0.22 g of 1,3-bis(diphenylphosphino)propane and 0.62 g of a toluene solution of nickel naphthenate (II) (content: 5% by weight) were mixed to prepare a solution containing a nickel catalyst. The xylene solution containing 2,6-dichloroimidazo[1,2-b]pyridazine and the solution containing a nickel catalyst were mixed, and to the resultant mixture, 63.4 g of a tetrahydrofuran solution of n-propylmagnesium bromide (content: 22.2% by weight) was added dropwise over about 2 hours at an inner temperature of 20 to 30C to effect reaction. After completion of the reaction, the reaction mixture was added dropwise into a mixture of 40.4 g of 3% by weight aqueous sulfuric acid solution and 1 g of Radiolite (which was manufactured by Showa Chemical Industry Co., LTD.). After that, the resultant mixture was stirred and filtrated. The organic layer was separated from the filtrate obtained and washed twice with about 40 g of water. The organic layer after washing was concentrated to obtain 20.9 g of 6-n-propyl-2-chloroimidazo[1,2-b]pyridazine (purity: 93.2%). Yield: 94%

According to the analysis of related databases, 112581-77-8, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Sumitomo Chemical Company, Limited; EP1932846; (2008); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Some common heterocyclic compound, 15205-11-5, name is 2-Chloro-4-fluorobenzylamine, molecular formula is C7H7ClFN, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. COA of Formula: C7H7ClFN

Example 82; /V-[(2-chloro-4-fluorophenyl)methyl]-2-[3,5-dimethyl-1-(2-phenylethyl)- 1H-pyrazol-4-yl]acetamide (E82)[3,5-dimethyl-1-(2-phenylethyl)-1 H-pyrazol-4-yl]acetic acid (0.63 mmol) was dissolved in dimethylformamide (2 ml) and to this was added O-(7-Azabenzotriazol- 1-yl)-N,N,N’,N’-tetramethyluronium hexafluorophosphate (HATU, 0.63 mmol) and diisopropylethylamine (DIPEA, 1.26 mmol). The mixture was left to stand at room temperature for 15-20 minutes and then [(2-chloro-4-fluorophenyl)methyl]amine (0.63 mmol) in dimethylformamide (1 ml) was added. The mixture was left to stand overnight at room temperature and then the solvents were evaporated in-vacuo. The residue was partitioned between dichloromethane and saturated aqueous sodium hydrogen carbonate. The mixture was then filtered through a phase separator and the organic phase was evaporated to give the crude product. The crude material was purified by mass-directed automated HPLC to give the title compound as product after lyophilisation of the combined product fractions. LC/MS [M+H]+ = 399, retention time = 3.16 minutes.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 15205-11-5, its application will become more common.

Reference:
Patent; GLAXO GROUP LIMITED; WO2008/138876; (2008); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

432-21-3, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 432-21-3 as follows.

1-Chloro-3-iodo-2-trifluoromethyl-benzeneTo a suspension of 3-Chloro-2-trifluoromethyl-phenylamine hydrochloride (30.9 g, iQ 0.16 mol) in H2O (90 mL) was added cone. HCI (65 mL) portion wise allowing the reaction to heat up to -45 0C. The temperature was maintained for 30 min then cooled in an ice bath < 5 0C. CH2CI2 (10 mL) was added and -10 min later a solution of sodium nitrite (13.6 g, 0.197 mol) in H2O (25 mL) was added dropwise. After a further 30 min, a solution of NaI (28.2 g, 0.188 mol) in H2O (50 mL) was again added dropwise keeping the temperature < 5 0C j 5 throughout both additions. After -1 h the reaction was diluted with CH2CI2 (200 mL) and sodium metabisulfite was added until the I2 color had been discharged. The layers were separated and the organic washed with brine, dried and the solvent evaporated to give 1- Chloro-3-iodo-2-trifluoromethyl-benzene (38.3 g, 79%) as an orange solid, which was used without further purification. MS: APCI: M+: 306.0 (305.9) At the same time, in my other blogs, there are other synthetic methods of this type of compound, 432-21-3, and friends who are interested can also refer to it. Reference:
Patent; PFIZER PRODUCTS INC.; WO2008/20306; (2008); A2;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 4535-90-4, name is 2-Chloro-N-methylethanamine hydrochloride, A new synthetic method of this compound is introduced below., Quality Control of 2-Chloro-N-methylethanamine hydrochloride

Water (0.5 mL), intermediate 17 (0.17 g; 0.51 mmol) followed by tetrabutylammonium bromide (41 mg; 0.13 mmol) were added at room temperature to a mixture of potassium hydroxide (0.50 g; 7.63 mmol) in 2-methyltetrahydrofuran (5 mL). The reaction mixture was stirred for 10 minutes at room temperature, then stirred at 50C for 1 hour and (2- chloroethyl)-methylamine hydrochloride (CAS 4535-90-4) (0.119 g; 0.92 mmol) was added. The reaction mixture was stirred for 24 hours at 50C. The reaction mixture was cooled down to room temperature, poured into water and extracted with EtOAc. The organic layer was washed with brine, dried over MgS04, filtered and evaporated to dryness. The residue was purified by chromatography over silica gel (Spherical SiOH, 10muiotaeta, 60g; mobile phase: gradient from 0.5% NH4OH, 97% DCM, 3% MeOH to 0.5% NH OH, 95% DCM, 5% MeOH). The pure fractions were collected and evaporated to give 30 mg (15%) which was taken up Et20 and evaporated to give 29 mg (14%) of compound 44 , MP.: 80C (gum, Kofler).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; ASTEX THERAPEUTICS LIMITED; BERDINI, Valerio; SAXTY, Gordon; ANGIBAUD, Patrick Rene; QUEROLLE, Olivier Alexis Georges; PONCELET, Virginie Sophie; ROUX, Bruno; MEERPOEL, Lieven; WO2013/61080; (2013); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Synthetic Route of 13726-14-2, A common heterocyclic compound, 13726-14-2, name is 4-Chloro-3-methoxyaniline, molecular formula is C7H8ClNO, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: Procedure B: A mixture of substituted 2,4-dichloropyrimidine (1.0 equiv.), and substituted aniline (1.0-1.05 equiv.), and DIPEA (1.2 equiv.) in isopropanol (0.1 M) was stirred and heated at reflux. The reaction time, work-up, and product isolation procedure are described below.

The synthetic route of 13726-14-2 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; H. LEE MOFFITT CANCER CENTER AND RESEARCH INSTITUTE, INC.; SCHOeNBRUNN, Ernst; LAWRENCE, Nicholas, J.; LAWRENCE, Harshani, R.; (257 pag.)WO2016/22460; (2016); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics