Category: chlorides-buliding-blocks

Electric Literature of 694-80-4, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 694-80-4 name is 1-Bromo-2-chlorobenzene, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

General procedure: To a round bottle with a magnetic stir bar, ligand (0.01% mmol), PdCl2 (0.01% mmol), aryl halides (1.0 mmol), phenylboronic acid (1.2 mmol), K2CO3 (2.0 mmol) and 6 ml of solvent were added. The reaction mixture was conducted at room temperature for the required time, and then the solvent was removed under reduced pressure. The residual was diluted with Et2O (5 mL), followed by extraction twice (2×5 mL) with Et2O. The organic layer was dried with anhydrous MgSO4, filtered and evaporated under vacuum. The conversions rates were analyzed by gas chromatography, based on the peak area normalization method. The corrected factor was determined by samples against a standard of n-heptane. The crude products were purified by silica-gel column chromatography using petroleum ether-ethyl acetate (20:1) as an eluent, and the isolated yield was then calculated based on the feeding of the aryl halide. The isolated corresponding products were characterized by 1H NMR and 13C NMR.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 1-Bromo-2-chlorobenzene, and friends who are interested can also refer to it.

Reference:
Article; Zhou, Zhen; Cao, Gao; Liu, Ning; Chemistry Letters; vol. 48; 6; (2019); p. 547 – 550;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Related Products of 6775-78-6, These common heterocyclic compound, 6775-78-6, name is 6-Chloroimidazo[1,2-b]pyridazine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

478 mg (3.11 mmol) of 6-chloroimidazo[1 ,2-b]pyridazine were introduced into 10 mL of chloroform under argon and, while cooling in ice, 664 mg (3.73 mmol) of N-bromosuccuinimide were added. After the addition was complete, the reaction mixture was stirred at room temperature overnight. The reaction mixture was then mixed with water and ethyl acetate and, after addition of saturated sodium bicarbonate solution, the phases were separated. The aqueous phase was extracted three more times with ethyl acetate. The combined organic phases were then washed with sat. sodium chloride solution and dried over sodium sulfate. In the final removal of the solvent in vacuo, the desired product was isolated in quantitative yield in the form of an amorphous white solid which was employed without further chromatographic purification in subsequent reactions. 1H-NMR (CHLOROFORM-d): delta [ppm] = 7.12 (1 H); 7.79 (1 H); 7.90 (1 H).

Statistics shows that 6-Chloroimidazo[1,2-b]pyridazine is playing an increasingly important role. we look forward to future research findings about 6775-78-6.

Reference:
Patent; BAYER INTELLECTUAL PROPERTY GMBH; EIS, Knut; PUeHLER, Florian; ZORN, Ludwig; SCHULZE, Volker; SUeLZLE, Detlev; LIENAU, Philip; HAeGEBARTH, Andrea; PETERSEN, Kirstin; BOeMER, Ulf; WO2013/144189; (2013); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 1435-48-9, name is 2,4-Dichloro-1-fluorobenzene, belongs to chlorides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 1435-48-9, COA of Formula: C6H3Cl2F

[209] Alternate preparation: To a solution of 2,4-dichloro-1-fluorobenzene (100 g, 0.606 mol) in THF (1.4 L) under nitrogen at -78 C, was added a 2.5 M solution of n-BuLi in hexanes (267 ml_, 0.666 mol) dropwise over a period of 30 min, maintaining the temperature between -70 to -78 C. After 1.5 h stirring at -78 C, methyl formate (72.6 ml_, 1.21 mol) was added slowly, and the reaction mixture was stirred overnight, warming up to rt. The reaction was quenched with sat. aqueous NH4CI (200 ml.) and the organic layer was separated. The organic solvents were removed by distillation at atmosphere pressure and the crude material which contained a small amount of THF was crystallized from hexanes to give the title compound.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; OSI PHARMACEUTICALS, INC.; CHEN, Xin; JIN, Meizhong; KLEINBERG, Andrew; LI, An-hu; MULVIHILL, Mark, J.; STEINIG, Arno, G.; WANG, Jing; WO2010/59771; (2010); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Electric Literature of 96558-78-0, The chemical industry reduces the impact on the environment during synthesis 96558-78-0, name is 3-Bromo-5-chlorophenylamine, I believe this compound will play a more active role in future production and life.

Preparation of starting material 3-chloro-5-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)aniline (SM-17) This material was prepared from 3-bromo-5-chloroaniline following a similar procedure used for SM-9, step 3. The crude product was purified by flash chromatography (RediSep Cyano, Teledyne ISCO, 0-50% EtOAc in hexanes) to afford 3-chloro-5-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)aniline (48%) as a pale orange solid: LCMS(m/z) 172.1 (MH+), tR=0.33 minute.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 3-Bromo-5-chlorophenylamine, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Costales, Abran Q.; Huang, Shenlin; Jin, Jeff (Xianming); Liu, Zuosheng; Pecchi, Sabina; Poon, Daniel; Tellew, John; US2011/52578; (2011); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Application of 33406-96-1, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 33406-96-1, name is 1-Chloro-4-fluoro-2-methylbenzene belongs to chlorides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

2-Chloro-5-fluoro-4-nitrotoluene. To a stirred solution of 2-chloro-5-fluorotoluene (0.500 g, 3.46 mmol, Lancaster, used as received) in conc. H2 SO4 (5.0 mL) at 0 C., KNO3 (0.350 g, 3.46 mmol) was added in one lot. The resulting pale yellow solution was allowed to warm to 28 C. and stirred overnight at 28 C. It was then poured into ice (50 g) and extracted with ether (2*50 mL). The ether was dried over anhydrous Na2 SO4, removed under vacuum, and the resulting oil was dried further under vacuum to afford 0.616 g (94%) of the title compound as an oil, which was used as such for the next reaction; 1 H NMR (CDCl3): delta2.459 (s, 3H), 7.193 (d, 1H, J1 =11.1 Hz), 8.083 (d, 1H, J1 =6.6 Hz).

The synthetic route of 1-Chloro-4-fluoro-2-methylbenzene has been constantly updated, and we look forward to future research findings.

Reference:
Patent; State of Oregon, acting by and through the Oregon State Board of Higher Education, acting for and on behalf of the Oregon Health Sciences University and the University of Oregon, Eugene Oregon; Acea Pharmaceuticals, Inc.; The Regents of the University of California; US5631373; (1997); A;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 13918-92-8, name is 2,4-Difluorobenzene-1-sulfonyl chloride, A new synthetic method of this compound is introduced below., Safety of 2,4-Difluorobenzene-1-sulfonyl chloride

General procedure: To a solution of 5-bromo-2-methoxypyridin-3-amine (2.01 g,10 mmol) in pyridine (50 mL) at 0 C was added methanesulfonylchloride (1.72 g, 11 mmol). Then the mixture was stirred at 25 C for24 h. Pyridine was removed at reduced pressure and add water (100 mL), extracted with ethyl acetate (3×100 mL), the organic layerwas washed with water (50 mL), dried with Na2SO4 and evaporated togive compound 6a as a white solid. Yield 78.4%, m.p. 150-151 C. 1HNMR (400 MHz, DMSO-d6) 9.51 (s, 1H, NH), 8.09 (d, J=2.4 Hz, 1H,Ar-H), 7.77 (d, J=2.4 Hz, 1H, Ar-H), 3.91 (s, 3H, OCH3), 3.16 (t,J=7.6 Hz, 2H, CH2), 1.73-1.65 (m, 2H, CH2), 1.42-1.33 (m, 2H, CH2),0.87 (t, J=7.2 Hz, 3H, CH3). ESI-MS: m/z 384.1 [M+H]+.Compounds 6b was synthesized according to the procedure describedin 6a.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Dong, Fu-Dan; Liu, Dan-Dan; Deng, Cheng-Long; Qin, Xiao-chun; Chen, Kai; Wang, Jian; Song, Hong-Rui; Ding, Huai-Wei; Bioorganic and Medicinal Chemistry; vol. 26; 14; (2018); p. 3982 – 3991;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 1996-29-8, name is 1-Bromo-4-chloro-2-fluorobenzene belongs to chlorides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below. Computed Properties of C6H3BrClF

To a stirred solution of l-Bromo-4-chloro-2-fluorobenzene Al (200 g, 0.955 mol, 1.0 equiv.) in anhydrous THF (2.0 L) was added 2.0 M lithium diisopropylamide (LDA) in THF (620 mL, 1.24 mol, 1.3 equiv.) at -50 C, the reaction mixture was allowed to -20 C and stirred for 1 h. Then it was re-cooled to -50 C and slowly added DMF (184.8 mL, 2.48 mol, 2.6 equiv.) at the same temperature. The mixture was allowed to 0 C and stirred for 30-45 min. After completion of the reaction (monitored by TLC), it was quenched with the slow addition of ice cold water (2.0 L); then diluted with ethyl acetate (2.0 L) and stirred for 15 min at room temperature. The organic layer was separated and aqueous layer was extracted with ethyl acetate (2 x 1.0 L). The combined organic layers were washed with water (2 x 1 0 L); 1.0 N HC1 (1 0 L) and 1 % NaCl solution (2.0 L). The organic layer was dried over anhydrous Na2SC , concentrated under vacuum. The resultant crude solid was directly used for next step without further purification. Yield: 210.0 g, 93% (reported 78%). NMR (400 MHz, CDCb): delta 10.39 (d, J= 0.8 Hz, 1H), 7.69 (dd, Ji = 7.2 Hz, J2 = 8.8 Hz, 1H), 7.19 (dd, Ji = 1.2 Hz, J2 = 8.4 Hz, 1H).

The synthetic route of 1996-29-8 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; VIIV HEALTHCARE UK (NO.5) LIMITED; BABU, Suresh; BELEMA, Makonen; BENDER, John A; IWUAGWU, Christiana; KADOW, John F.; KUMARAVEL, Selvakumar; NAGALAKSHMI, Pulicharla; NAIDU, B. Narasimhulu; PATEL, Manoj; PEESE, Kevin M; RAJAMANI, Ramkumar; SAULNIER, Mark; WANG, Alan Xiangdong; (536 pag.)WO2018/203235; (2018); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Electric Literature of 69411-05-8, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 69411-05-8, name is 3-Chloro-5-trifluoromethylaniline belongs to chlorides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

General procedure: To a solution of 3-chloroaniline 5a (37mg, 0.33mmol) in H2O (10mL cooled to-5C) was added 0.2mL of 2N HCl (aq.). To the resulting acidic aniline solution, 1N solution of sodium nitrite (0.33mL, 0.33mmol) was added dropwise to generate the aryldiazonium salt solution 6a. To the aryldiazonium salt solution was added sodium acetate (54mg, 0.66mmol), followed by 1mL solution of crude 3-oxo-3-(3-phenylisoxazol-5-yl)propanenitrile 4a (88mg, 0.33mmol) in ethanol. The reaction mixture was stirred at 0C for 5min, and then poured onto H2O (10mL) and extracted with ethyl acetate (20mL). The organic layer was dried over Na2SO4, filtered and concentrated under reduced pressure. The residue was purified by short column chromatography on silica gel, eluting with hexane/ethyl acetate (2/1) to provide the desired product 7 (67mg, 50% for two steps from 3a) as a yellow solid.

The synthetic route of 3-Chloro-5-trifluoromethylaniline has been constantly updated, and we look forward to future research findings.

Reference:
Article; Ye, Na; Zhu, Yingmin; Liu, Zhiqing; Mei, Fang C.; Chen, Haiying; Wang, Pingyuan; Cheng, Xiaodong; Zhou, Jia; European Journal of Medicinal Chemistry; vol. 134; (2017); p. 62 – 71;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Reference of 4261-67-0, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 4261-67-0 name is 3-Chloro-N,N,2-trimethylpropan-1-amine hydrochloride, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

EXAMPLE 3 Cis(+)-3-acetyloxy-2,3-dihydro-5-(2-methyl-3-dimethylaminopropyl)-2-(4-methoxyphenyl)-1,5-benzothiazepin-4(5H)-one oxalate (diastereoisomer B) 5 g cis(+)-2,3-dihydro-3-hydroxy-2-(4-methoxyphenyl)-1,5-benzothiazepin-4(5H)-one, 2.9 g 2-methyl-3-dimethylaminopropylchloride hydrochloride, 5.7 g K2 CO3, 1.4 ml H2 O were reacted in 75 ml acetone, according to the procedure as in Example 1 (a), then reacted with 70 ml acetic anhydride, (see Example 1 (b)). The crude was treated with ethyl ether and the so obtained solid is filtered off and the solution was evaporated to dryness. This procedure was repeated. 4.3 g residue were dissolved in isopropyl alcohol and treated with 1.2 g oxalic acid. A solid, which was crystallized from acetone-ethyl ether, was obtained; m.p. 84°-89° C.; [alpha]D20 =119.3 (H2 O).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 3-Chloro-N,N,2-trimethylpropan-1-amine hydrochloride, and friends who are interested can also refer to it.

Reference:
Patent; Istituto Luso Farmaco d’Italia S.p.A.; US5571807; (1996); A;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 106131-61-7, name is 3,6-Dichloro-1,2,4,5-tetrazine, This compound has unique chemical properties. The synthetic route is as follows., Quality Control of 3,6-Dichloro-1,2,4,5-tetrazine

To a solution of 3,6-dichloro-1,2,4,5-tetrazine (1.51 g, 10 mmol) in acetonitrile (70 ml) was added the sodium salt of 5-amino-1H-tetrazole (2.14 g, 10 mmol). The mixture was refluxed for 24 hours then allowed to cool to room temperature. The suspension was centrifuged until the supernatant liquid was clear. The liquid was decanted and the brown solid washed successively with acetonitrile and water. With each wash the solid was separated from the solvent by centrifugation followed by decantation. The isolated crude yield was 1.5 g (60%), this material was recrystallized from DMSO/methanol yielding an orange brown powder mp 264 C. dec; 1H NMR(deuteriomethylsulfoxide) 12.5(b,r s,4H); 13 C NMR (deuteriomethylsulfoxide) 151.74, 158.25; IR (KBr) 3421, 3000, 1615, 1436, 1127 cm-1. A gas pycnometer density of 1.76 g/cm3 was also determined and a drop height of 195 cm was measured (Type 12, HMX=24-27 cm).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 106131-61-7.

Reference:
Patent; The Regents of the University of California; US6657059; (2003); B2;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics