Category: 5137-55-3

Enhanced separation of nitrophenols from wastewater by using ammonium ionic liquid with thiocyanate anion in supported liquid membrane was written by Kulkarni, Prashant Shripad;Shaikh, Vasi Ahmed Ebrahim;Sutradhar, Monish. And the article was included in Separation Science and Technology in 2022.Application In Synthesis of N-Methyl-N,N-dioctyloctan-1-aminium chloride The following contents are mentioned in the article:

The present investigation deals with separation of various types of nitrophenols using SILM technique. Several ionic liquids were developed and the SILM parameters such as role of ILs, feed and strip phase concentration, wastewater pH, salt effect and mixture of pollutants were thoroughly investigated. The percentage extraction and stripping, flux, apparent rate constants and selectivity were evaluated. The selected ammonium IL being more polar than the imidazolium IL showed better separation of 2-nitrophenol. The SILM constituting an ammonium IL with SCN anion exhibited extraction efficiency of >96% and Ka: 0.264 h^-1. The change in feed concentration showed maximum transport of nitrophenol at 300 ppm concentration (Ka: 0.673 h^-1). The membranes were repeated for 4 cycles which demonstrated good stability for runs of more than 48 h. The selectivity of 2-nitrophenol, 2,4-dinitrophenol, 2,4,6- trinitrophenol over nitrobenzene was 26, 36 and 58, resp. The morphol. of membranes was studied by using FTIR and FE-SEM and the transport mechanism was elucidated. With the optimized parameters, a concentration factor of 7 can be achieved in the present SILM system. The application of SILM including ammonium IL with SCN anion shows a promising potential for the treatment of various types of nitrophenol bearing wastewater. This study involved multiple reactions and reactants, such as N-Methyl-N,N-dioctyloctan-1-aminium chloride (cas: 5137-55-3Application In Synthesis of N-Methyl-N,N-dioctyloctan-1-aminium chloride).

N-Methyl-N,N-dioctyloctan-1-aminium chloride (cas: 5137-55-3) belongs to organic chlorides. Chlorination modifies the physical properties of hydrocarbons in several ways. These compounds are typically denser than water due to the higher atomic weight of chlorine versus hydrogen. Alkyl chlorides are versatile building blocks in organic chemistry. While alkyl bromides and iodides are more reactive, alkyl chlorides tend to be less expensive and more readily available.Application In Synthesis of N-Methyl-N,N-dioctyloctan-1-aminium chloride

Referemce:
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Magnetic all-inorganic perovskite nanocrystals demonstrating well-defined hybrid structure and superhydrophobic behavior towards movable and stable photoluminescence was written by Yu, Weitai;Wei, Zhan;Chen, Jiaqi;Lin, Pengcheng;Zhao, Xi;Chen, Ying. And the article was included in Journal of Luminescence in 2022.Category: chlorides-buliding-blocks The following contents are mentioned in the article:

As an emerging light-harvesting and light-emitting materials, all-inorganic perovskite nanocrystals (AIPNCs) have attracted widespread attentions in optoelectronic materials and devices. However, great challenges exist for the fabrication of novel AIPNCs demonstrating magnetic properties. Here, magnetic AIPNCs (M-AIPNC) with well-defined hybrid nanostructures of Fe₃O₄@SiO₂@AIPNC are proposed. The core-shell structured chem. encapsulation and the in-situ crystal growth are designed to fabricate the magnetic substrate of Fe₃O₄@SiO₂ and to link the AIPNCs, resp. The as-prepared M-AIPNCs display brilliant blue, green and red photoluminescence by adjusting the chem. compositions of AIPNCs. The M-AIPNCs also demonstrate enhanced water stability due to their surficial hydrophobicity. The photoluminescence of Fe₃O₄@SiO₂@AIPNC in the heating process exhibits a power exponential temperature response, and can be recovered in the cooling process. Most importantly, the M-AIPNCs can realize the mobile photoluminescence driven by a remote magnetic field. The M-AIPNCs with multi-colored fluorescence, excellent fluorescence stability, reversible temperature response and non-contact motion control provide a brand-new strategy to create the next generation of intelligent optical materials. This study involved multiple reactions and reactants, such as N-Methyl-N,N-dioctyloctan-1-aminium chloride (cas: 5137-55-3Category: chlorides-buliding-blocks).

N-Methyl-N,N-dioctyloctan-1-aminium chloride (cas: 5137-55-3) belongs to organic chlorides. Chlorinated organic compounds are found in nearly every class of biomolecules and natural products including alkaloids, terpenes, amino acids, flavonoids, steroids, and fatty acids. Aryl chlorides may be prepared by the Friedel-Crafts halogenation, using chlorine and a Lewis acid catalyst.Category: chlorides-buliding-blocks

Referemce:
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Development of a new binding phase for the diffusive gradients in thin films technique based on an ionic liquid for mercury determination was written by Elias, Gemma;Diez, Sergi;Zhang, Hao;Fontas, Claudia. And the article was included in Chemosphere in 2020.HPLC of Formula: 5137-55-3 The following contents are mentioned in the article:

Determining bioavailable trace concentrations of mercury (Hg) in water is still a challenging anal. task. In this study, we report a methodol. for determining labile Hg in natural waters using newly developed sorbents. Silicon dioxide at a nanoparticle range (Si-np) and cellulose powder at a microparticle range (Cel-p), both modified with the ionic liquid trioctylmethylammonium thiosalicylate (TOMATS), have been tested as sorbents (sorb-TOMATS) for Hg(II) uptake from solution These novel sorb-TOMATS materials were characterized, and parameters affecting the uptake were examined A similar Hg(II) uptake efficiency (97%) and binding capacity (9 mg Hg/g) was obtained for both sorb-TOMATS, while only a 25% of Hg(II) was taken up using non-impregnated materials. Moreover, these sorb-TOMATS were effectively embedded in agarose gel and were tested as a novel binding phase for the Diffusive Gradients in Thin Films (DGT) technique. Research revealed Si(np)-TOMATS sorbent as a suitable binding phase in the DGT technique for Hg(II) measurements, since it also allowed the efficient elution of the bound Hg(II). This new binding phase showed strong linear correlation between the accumulated Hg(II) mass and deployment time, which is in agreement with the DGT principle. In summary, this novel sorbent has a great potential to improve Hg monitoring in natural waters when integrated it in the DGT design. This study involved multiple reactions and reactants, such as N-Methyl-N,N-dioctyloctan-1-aminium chloride (cas: 5137-55-3HPLC of Formula: 5137-55-3).

N-Methyl-N,N-dioctyloctan-1-aminium chloride (cas: 5137-55-3) belongs to organic chlorides. Organochlorines stimulate the central nervous system and cause convulsions, tremor, nausea, and mental confusion. Examples are dichlorodiphenyltrichloroethane (DDT), chlordane, lindane, endosulfan, and dieldrin. The haloform reaction, using chlorine and sodium hydroxide, is also able to generate alkyl halides from methyl ketones, and related compounds. Chloroform was formerly produced thus.HPLC of Formula: 5137-55-3

Referemce:
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Extraction and determination of strobilurin fungicides residues in apple samples using ultrasound-assisted dispersive liquid-liquid microextraction based on a novel hydrophobic deep eutectic solvent followed by H.P.L.C-U.V was written by Ahmadi-Jouibari, Touraj;Shaahmadi, Zahra;Moradi, Masoud;Fattahi, Nazir. And the article was included in Food Additives & Contaminants, Part A in 2022.Computed Properties of C25H54ClN The following contents are mentioned in the article:

In this study, several novel and natural hydrophobic deep eutectic solvents (D.E.Ss) were prepared using Me trioctylammonium chloride (M.T.O.A.C) as H. B. A and different types of straight chain alcs. as H. B.Ds. One of the D. E.Ss composed of M. T. O. A. C and n-butanol was advantageously used to develop an ultrasound-assisted dispersive liquid-liquid microextraction (U.A-D.L.L.M.E) method combined with high-performance liquid chromatog.-UV detection (H.P.L.C-U.V) for the determination of some strobilurin fungicides in apple samples. Several important parameters influencing extraction efficiency were investigated and optimized, including the type and volume of extractant in ultrasound stage, sonication time, the type and volume of D. E. S, sample solution pH and effect of salt addition Under optimal exptl. conditions, the method showed good linearity with correlation coefficients (R²) of 0.9985 – 0.9991 in the linear range of 4-1500μg kg^-1, low limits of detection of 1.5-2μg kg^-1 and acceptable extraction recoveries in the range of 76-92%. Enrichment factor was in the range of 95-115. The proposed method was successfully applied for the extraction and preconcentration of trace fungicides in apple samples, and the results demonstrated the potential of the synthesized D. E. S for the extraction and determination of contaminants in aqueous samples. This study involved multiple reactions and reactants, such as N-Methyl-N,N-dioctyloctan-1-aminium chloride (cas: 5137-55-3Computed Properties of C25H54ClN).

N-Methyl-N,N-dioctyloctan-1-aminium chloride (cas: 5137-55-3) belongs to organic chlorides. Chlorinated organic compounds are found in nearly every class of biomolecules and natural products including alkaloids, terpenes, amino acids, flavonoids, steroids, and fatty acids. Aryl chlorides may be prepared by the Friedel-Crafts halogenation, using chlorine and a Lewis acid catalyst.Computed Properties of C25H54ClN

Referemce:
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

In situ product recovery of bio-based industrial platform chemicals: a guideline to solvent selection was written by De Brabander, Pieter;Uitterhaegen, Evelien;Verhoeven, Ellen;Cruyssen, Cedric Vander;De Winter, Karel;Soetaert, Wim. And the article was included in Fermentation in 2021.Recommanded Product: 5137-55-3 The following contents are mentioned in the article:

In situ product recovery (ISPR), in the form of an extractive fermentation process, can increase productivity and product titers in the sustainable production of platform chems. To establish a guideline for the development of industrially relevant production processes for such bio-based compounds, a wide screening was performed, mapping the potential of an extensive range of solvents and solvent mixtures Besides solvent biocompatibility with Saccharomyces cerevisiae, distribution coefficients of three organic acids (protocatechuic acid, adipic acid and para-aminobenzoic acid) and four fragrance compounds (2-phenylethanol, geraniol, trans-cinnamaldehyde and β-ionone) were determined While for highly hydrophobic fragrance compounds, multiple pure solvents were identified that were able to extract more than 98%, reactive extraction mixtures were proven effective for more challenging compounds including organic acids and hydrophilic alcs. For example, a reactive mixture consisting of 12.5% of the extractant CYTOP 503 in canola oil was found to be biocompatible and showed superior extraction efficiency for the challenging compounds as compared to any biocompatible single solvent. This mapping of biocompatible solvents and solvent mixtures for the extraction of various classes of industrial platform chems. can be a tremendous step forward in the development of extractive fermentations This study involved multiple reactions and reactants, such as N-Methyl-N,N-dioctyloctan-1-aminium chloride (cas: 5137-55-3Recommanded Product: 5137-55-3).

N-Methyl-N,N-dioctyloctan-1-aminium chloride (cas: 5137-55-3) belongs to organic chlorides. Organic chlorides can cause corrosion in pipelines, valves and condensers, and cause catalyst poisoning. The hydrocarbon processing industry (HPI) and others are affected by damage caused by these substances. Alkyl chlorides are versatile building blocks in organic chemistry. While alkyl bromides and iodides are more reactive, alkyl chlorides tend to be less expensive and more readily available.Recommanded Product: 5137-55-3

Referemce:
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Emulsion liquid membrane modeling for chromium removal from electroplating wastewater using TOMAC as a carrier was written by Othman, Norasikin;Noah, Norul fatiha mohamed;Sulaiman, Raja norimie raja;Jusoh, Norela;Tan, Wan ting. And the article was included in Water Environment Research in 2021.Reference of 5137-55-3 The following contents are mentioned in the article:

Hexavalent chromium, emanating primarily from the electroplating industries, can be reduced to the less toxic trivalent variety by several methods, including emulsion liquid membrane (ELM). In this work, studies on the continuous removal of chromium from authentic electroplating wastewater by ELM are reported. The effects of treat ratio, external feed phase, and stripping agent concentration were examined A math. boundary breakage model was used to study the extraction efficiency of chromium through the ELM process. The model representing the prediction of ELM extraction performance for chromium was validated through the comparison between the simulation and exptl. results. The result showed the simulation model is found to be in good agreement with the exptl. result. Almost 100% of 40 ppm chromium in the external feed phase was extracted within 3 to 5 min using 0.022 M TOMAC as extractant, 1.0 M acidic thiourea in the internal phase, and 1 to 5 of treat ratio. This study involved multiple reactions and reactants, such as N-Methyl-N,N-dioctyloctan-1-aminium chloride (cas: 5137-55-3Reference of 5137-55-3).

N-Methyl-N,N-dioctyloctan-1-aminium chloride (cas: 5137-55-3) belongs to organic chlorides. Organic chlorides can cause corrosion in pipelines, valves and condensers, and cause catalyst poisoning. The hydrocarbon processing industry (HPI) and others are affected by damage caused by these substances. Aliphatic organochlorides are often alkylating agents as chlorine can act as a leaving group, which can result in cellular damage.Reference of 5137-55-3

Referemce:
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Cellulose extraction from methyltrioctylammonium chloride pretreated sugarcane bagasse and its application was written by Ejaz, Uroosa;Muhammad, Shoaib;Ali, Firdous Imran;Hashmi, Imran Ali;Sohail, Muhammad. And the article was included in International Journal of Biological Macromolecules in 2020.SDS of cas: 5137-55-3 The following contents are mentioned in the article:

Cellulose, the most abundant feedstock of chems. and energy is extracted from various agro-industrial wastes, such as sugarcane bagasse (SB). Pretreatment of SB with ionic liquids improves extraction of cellulose, yet the use of ionic liquid is hindered by its high cost. In this study, cellulose was extracted from SB pretreated with methyltrioctylammonium chloride under relatively mild conditions. The extracted cellulose from pretreated SB (PTB) and untreated SB (UTB) was characterized by SEM and FTIR. Fermentation of cellulose extracted from PTB by a thermophilic bacterium, Bacillus aestuarii UE25, yielded 245.16% higher titers of cellulase than cellulose extracted from UTB. The recyclability of the IL was assessed to make the pretreatment process cost effective and was monitored through TLC and FTIR. The results of this research demonstrated the potential of ionic liquid pretreated SB for cellulose extraction and for its subsequent utilization in thermostable cellulase production This study involved multiple reactions and reactants, such as N-Methyl-N,N-dioctyloctan-1-aminium chloride (cas: 5137-55-3SDS of cas: 5137-55-3).

N-Methyl-N,N-dioctyloctan-1-aminium chloride (cas: 5137-55-3) belongs to organic chlorides. An organic chloride is an organic compound containing at least one covalently bonded atom of chlorine. Their wide structural variety and divergent chemical properties lead to a broad range of names and applications.While alkyl bromides and iodides are more reactive, alkyl chlorides tend to be less expensive and more readily available. Alkyl chlorides readily undergo attack by nucleophiles.SDS of cas: 5137-55-3

Referemce:
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Separation and purification of pyrroloquinoline quinone from Gluconobacter oxydans fermentation broth using supramolecular solvent complex extraction was written by Ma, Ke;Wu, Zhen-Zhen;Wang, Guang-Lu;Yang, Xue-Peng. And the article was included in Food Chemistry in 2021.Application In Synthesis of N-Methyl-N,N-dioctyloctan-1-aminium chloride The following contents are mentioned in the article:

In this paper, new supramol. extractants, which contained surfactant, alkane and alkanol, were designed and used to sep. PQQ. After a series of tests, the optimal extractant composition was determined as benzalkalonium (C8-C16) chloride (BC): n-hexane:n-pentanol, and the highest extraction rate could reach 98%. The extraction equilibrium could be reached in five minutes. The mechanism of the extraction selectivity was inferred as an ion-pair and π-π complexation interaction between PQQ and BC, which was indicated by UV and fluorescence quenching experiments To recycle the organic extractant, the extract was back-extracted with sodium chloride solution After extraction, back extraction and crystallization, an isolated product with a purity of 97.5% was obtained from G. oxydans fermentation broth. The product was identified as PQQ by HPLC anal. and MS. Above all, the present research developed a simple and efficient method for the separation of PQQ from fermentation broth. This study involved multiple reactions and reactants, such as N-Methyl-N,N-dioctyloctan-1-aminium chloride (cas: 5137-55-3Application In Synthesis of N-Methyl-N,N-dioctyloctan-1-aminium chloride).

N-Methyl-N,N-dioctyloctan-1-aminium chloride (cas: 5137-55-3) belongs to organic chlorides. Chlorination modifies the physical properties of hydrocarbons in several ways. These compounds are typically denser than water due to the higher atomic weight of chlorine versus hydrogen. Alkyl chlorides are versatile building blocks in organic chemistry. While alkyl bromides and iodides are more reactive, alkyl chlorides tend to be less expensive and more readily available.Application In Synthesis of N-Methyl-N,N-dioctyloctan-1-aminium chloride

Referemce:
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

A simple and green ultrasound liquid-liquid microextraction method based on low viscous hydrophobic deep eutectic solvent for the preconcentration and separation of selenium in water and food samples prior to HG-AAS detection was written by Altunay, Nail;Tuzen, Mustafa. And the article was included in Food Chemistry in 2021.HPLC of Formula: 5137-55-3 The following contents are mentioned in the article:

A simple and green ultrasound liquid-liquid microextraction method based on low viscous hydrophobic deep eutectic solvent (ULLME-LV-HDES) was proposed for the preconcentration and separation of selenium prior to HG-AAS detection. Six different DESs were prepared for the extraction of selenium. Quercetin was used complexing agent for Se(IV) ions. Various anal. parameters such as pH, quercetin amount, DES type and its volume, sonication time, sample volume were optimized. Tolerance limits of anion, cation and transition metal ions were studied. Preconcentration and enhancement factor were found 62.5 and 121. Under the optimum conditions, limit of detection was found 0.25 ng L-1 with calibration range of 0.8-120 ng L-1. Relative standard deviation was found 3.2%. The accuracy of the method was confirmed with certified reference materials (NIST 1567a Wheat flour and NIST 1548a Typical diet). Finally, the developed method was successfully applied to food and water samples. This study involved multiple reactions and reactants, such as N-Methyl-N,N-dioctyloctan-1-aminium chloride (cas: 5137-55-3HPLC of Formula: 5137-55-3).

N-Methyl-N,N-dioctyloctan-1-aminium chloride (cas: 5137-55-3) belongs to organic chlorides. Organochlorines stimulate the central nervous system and cause convulsions, tremor, nausea, and mental confusion. Examples are dichlorodiphenyltrichloroethane (DDT), chlordane, lindane, endosulfan, and dieldrin.While alkyl bromides and iodides are more reactive, alkyl chlorides tend to be less expensive and more readily available. Alkyl chlorides readily undergo attack by nucleophiles.HPLC of Formula: 5137-55-3

Referemce:
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Green, fast and simple dispersive liquid-liquid microextraction method by using hydrophobic deep eutectic solvent for analysis of folic acid in fortified flour samples before liquid chromatography determination was written by Faraji, Mohammad;Mahmoodi-Maymand, Masoumeh;Dastmalchi, Farnaz. And the article was included in Food Chemistry in 2020.Electric Literature of C25H54ClN The following contents are mentioned in the article:

A fast, simple, sensitive, and efficient vortex-assisted dispersive liquid-liquid microextraction method (VA-DES-DLME) was developed based on hydrophobic deep eutectic solvent for extraction of folic acid from flour samples followed by HPLC determination Hydrophobic DES was prepared by mixing amylalc. as a hydrogen bond donor and methyltriocthylammonium chloride as a hydrogen bond acceptor. Factors affecting DLLME were considered and optimized. In optimal conditions, the calibration curve was linear in the range 5.0-500 ng g^-1 with a correlation coefficient higher than 0.99. The limit of detection (LOD) and the limit of quantification (LOQ) were 1.0 and 3.0 ng g^-1, resp. The intra-day and inter-day precision at concentrations of 10 and 100 ng g^-1 were less than 8%. Finally, application of the proposed procedure was investigated by folic acid anal. in flour samples and the relative recoveries obtained were acceptable (Recovery ≥ 90%). This study involved multiple reactions and reactants, such as N-Methyl-N,N-dioctyloctan-1-aminium chloride (cas: 5137-55-3Electric Literature of C25H54ClN).

N-Methyl-N,N-dioctyloctan-1-aminium chloride (cas: 5137-55-3) belongs to organic chlorides. Organochlorines are organic compounds having multiple chlorine atoms. They were the first synthetic pesticides that were used in agriculture. They are resistant to most microbial and chemical degradations. Organochlorine compounds are lipophylic, meaning they are more soluble in fat than in water. This gives them a high tenancy to accumulate in the food chain (biomagnification).Electric Literature of C25H54ClN

Referemce:
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics