Category: 5137-55-3

Combined pretreatment of sugarcane bagasse using alkali and ionic liquid to increase hemicellulose content and xylanase production was written by Rashid, Rozina;Ejaz, Uroosa;Ali, Firdous Imran;Hashmi, Imran Ali;Bari, Ahmed;Liu, Jing;Wang, Li;Fu, Pengcheng;Sohail, Muhammad. And the article was included in BMC Biotechnology.Computed Properties of C25H54ClN The following contents are mentioned in the article:

Multivariate anal. of different chem. pretreatment methods can aid to select the most appropriate strategy to valorize a particular biomass. Results: Amongst methods tested, the pretreatment by using sodium hydroxide in combination with methyltrioctylammonium chloride, an ionic liquid, (NaOH+IL) was the most significant for xylanase production by Bacillus aestuarii UE25. Investigation of optimal levels of five significant variables by adopting Box-Behnken design (BBD) predicted 20 IU mL^-1 of xylanase and exptl., a titer of 17.77 IU mL^-1 was obtained which indicated the validity of the model. The production kinetics showed that volumetric productivity of xylanase was much higher after 24 h (833.33 IU L^-1 h^-1) than after 48 h (567.08 IU L^-1 h^-1). The extracted xylan from SB induced more xylanase in the fermentation medium than pretreated SB or com. purified xylan. NMR, Fourier transform IR spectroscopy and SEM of SB indicated removal of lignin and changes in the structure of SB after NaOH+IL pretreatment and fermentation Conclusion: Combined pretreatment of SB with alkali and methyltrioctylammonium chloride appeared better than other chem. methods for bacterial xylanase production and for the extraction of xylan form SB. This study involved multiple reactions and reactants, such as N-Methyl-N,N-dioctyloctan-1-aminium chloride (cas: 5137-55-3Computed Properties of C25H54ClN).

N-Methyl-N,N-dioctyloctan-1-aminium chloride (cas: 5137-55-3) belongs to organic chlorides. Chlorinated organic compounds are found in nearly every class of biomolecules and natural products including alkaloids, terpenes, amino acids, flavonoids, steroids, and fatty acids. Aliphatic organochlorides are often alkylating agents as chlorine can act as a leaving group, which can result in cellular damage.Computed Properties of C25H54ClN

Referemce:
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Ultrasonic assisted magnetic solid phase extraction based on the use of magnetic waste-tyre derived activated carbon modified with methyltrioctylammonium chloride adsorbent for the preconcentration and analysis of non-steroidal anti-inflammatory drugs in wastewater was written by Akawa, Mpingana Ndilimeke;Dimpe, Kgogobi Mogolodi;Nomngongo, Philiswa N.. And the article was included in Arabian Journal of Chemistry in 2021.Computed Properties of C25H54ClN The following contents are mentioned in the article:

In this study, a magnetic waste-tyre derived activated carbon modified with methyltrioctylammonium chloride, was successfully synthesized, characterised, and applied for the extraction and preconcentration of four non-steroidal anti-inflammatory drugs in wastewater. The SEM and N2-adsorption/desorption anal. results confirmed that the synthesized nanocomposite was porous with a large sp. surface area of 570 m2 g-1. The significant factors affecting the Ultrasonic assisted magnetic solid phase extraction method were investigated using univariate approach and response surface methodol. The optimum conditions for the extraction and preconcentration of the target analytes were 0%, 15 min, 6.5 and 30 mg, for ionic strength, extraction time, pH and adsorbent mass resp. The quantification of the target analytes was performed using high performance liquid chromatog. equipped with diode array detector. Under optimum conditions, low limits of detection and quantification ranging between 0.054-0.38μg L-1 and 0.18-1.27μg L-1, resp., were obtained. A wide linearity (ranging from limit of detection – 500μg L-1 with R2 ≥ 0.99) and precision lower than 7%, were achieved. The applicability of proposed method was evaluated for the determination of naproxen, ketoprofen and diclofenac in wastewater. This study involved multiple reactions and reactants, such as N-Methyl-N,N-dioctyloctan-1-aminium chloride (cas: 5137-55-3Computed Properties of C25H54ClN).

N-Methyl-N,N-dioctyloctan-1-aminium chloride (cas: 5137-55-3) belongs to organic chlorides. Organic chlorides can be used in production of: PVC, pesticides, chloromethane, teflon, insulators. Alkyl chlorides readily react with amines to give substituted amines. Alkyl chlorides are substituted by softer halides such as the iodide in the Finkelstein reaction.Computed Properties of C25H54ClN

Referemce:
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Novel hydrophobic deep eutectic solvent for vortex-assisted liquid phase microextraction of common acaricides in fruit juice followed by HPLC-UV determination was written by Rostami-Javanroudi, Setareh;Moradi, Masoud;Sharafi, Kiomars;Fattahi, Nazir. And the article was included in RSC Advances in 2021.SDS of cas: 5137-55-3 The following contents are mentioned in the article:

In the present research, several novel and natural hydrophobic deep eutectic solvents (DESs) were prepared using methyltrioctylammonium chloride (MTOAC) as the hydrogen bond acceptor (HBA) and different types of straight chain alcs. as hydrogen bond donors (HBDs). One of the DESs composed of MTOAC and n-butanol was advantageously used to develop a vortex-assisted liquid phase microextraction (VALPME) method combined with high-performance liquid chromatog.-UV detection (HPLC-UV) for the determination of common acaricides in fruit juice samples. Several important parameters influencing extraction efficiency were investigated and optimized, including the type and volume of DES, sample solution pH, effect of salt addition and, extraction and vortex time. Under optimal exptl. conditions, the method showed good linearity with the correlation coefficients (R2) of 0.9986-0.9991 in the linear range of 2-300μg L-1, low limits of detection of 0.5-1μg L-1 and acceptable extraction recoveries in the range of 85-93%. The proposed method was successfully applied for the extraction and preconcentration of trace acaricides in real fruit juice samples, and the results demonstrated the potential of the synthesized DESs for the extraction and determination of contaminants in aqueous samples. This study involved multiple reactions and reactants, such as N-Methyl-N,N-dioctyloctan-1-aminium chloride (cas: 5137-55-3SDS of cas: 5137-55-3).

N-Methyl-N,N-dioctyloctan-1-aminium chloride (cas: 5137-55-3) belongs to organic chlorides. Organic chlorides can cause corrosion in pipelines, valves and condensers, and cause catalyst poisoning. The hydrocarbon processing industry (HPI) and others are affected by damage caused by these substances. Alkyl chlorides are versatile building blocks in organic chemistry. While alkyl bromides and iodides are more reactive, alkyl chlorides tend to be less expensive and more readily available.SDS of cas: 5137-55-3

Referemce:
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Dynamic adsorption of In(III) and Fe(III) on solvent impregnated resins containing trioctylmethylammonium chloride was written by Gao, Xuezhen;Liu, Junshen;Liu, Xunyong;Guo, Lei;Zhang, Shengxiao. And the article was included in Desalination and Water Treatment in 2021.Formula: C25H54ClN The following contents are mentioned in the article:

Solvent impregnated resins (SIRs) were prepared by dry impregnation using styrene-divinylbenzene type macroreticular resin (HZ-818) as support and trioctylmethylammonium chloride as extractant. Adsorption and separation performance of In(III) and Fe(III) with SIRs was studied on HCl medium by static and dynamic adsorption method. The effect of HCl concentration on the adsorption of In(III) and Fe(III) was investigated by static adsorption method. The effect of feed flow rate, bed height, and metal ion concentration (In(III) and Fe(III)) was investigated by dynamic adsorption method. The optimized acidity for In(III) and Fe(III) adsorption with SIRs was 4 mol/L HCl in single-component and bi-component systems containing In(III) and Fe(III). The dynamic adsorption study revealed that when the concentration of HCl, feed flow rate, bed height, and metal ion concentration were 4 mol/L, 1.4 mL/min, 140 mm, and 90 mg/L at ambient temperature, the adsorption capacities of In(III) and Fe(III) in single-component system were 13.1 and 37.8 mg/g, resp., and the adsorption capacities of In(III) and Fe(III) in bi-component system were 1.3 and 35.8 mg/g, resp. Hence, SIRs could selectively adsorb Fe(III), and the separation of In(III) and Fe(III) in HCl solution could be achieved. This study involved multiple reactions and reactants, such as N-Methyl-N,N-dioctyloctan-1-aminium chloride (cas: 5137-55-3Formula: C25H54ClN).

N-Methyl-N,N-dioctyloctan-1-aminium chloride (cas: 5137-55-3) belongs to organic chlorides. Organic chlorides can cause corrosion in pipelines, valves and condensers, and cause catalyst poisoning. The hydrocarbon processing industry (HPI) and others are affected by damage caused by these substances. Alkyl chlorides are versatile building blocks in organic chemistry. While alkyl bromides and iodides are more reactive, alkyl chlorides tend to be less expensive and more readily available.Formula: C25H54ClN

Referemce:
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Removal of picloram herbicide from an aqueous environment using polymer inclusion membranes was written by Mwakalesi, Alinanuswe J.;Potter, Ian D.. And the article was included in Journal of Environmental Chemical Engineering in 2020.Product Details of 5137-55-3 The following contents are mentioned in the article:

The picloram (4-amino-3,5,6-trichloro-2-pyridinecarboxylic acid) herbicide is widely applied to control the growth of woody plants and it has been frequently detected in aqueous environments due to its poor adsorption by soils and high leaching potential. Consequently, the removal of picloram from contaminated environmental waters is of major concern due to its adverse impacts on aquatic organisms, soils and animals. The development of a method for the extraction and transport of picloram from aqueous solutions using a polymer inclusion membrane (PIM) composed of cellulose triacetate, trioctylmethylammonium chloride (Aliquat 336) and 2-nitrophenyl octyl ether (NPOE) is reported. The exptl. method was optimized for the PIM composition, and the type and concentration of stripping reagent. The optimized method demonstrated good performance indicators of flux and transport efficiency for picloram during non-competitive and competitive transport experiments The PIM was also successfully applied in a passive sampling device to recover picloram at the maximum permissable concentration of 500μg/L from a complex matrix of natural water. Findings from this study demonstrate that PIMs can serve as a potential alternative method for the removal and recovery of picloram and related herbicides from contaminated aqueous solutions This study involved multiple reactions and reactants, such as N-Methyl-N,N-dioctyloctan-1-aminium chloride (cas: 5137-55-3Product Details of 5137-55-3).

N-Methyl-N,N-dioctyloctan-1-aminium chloride (cas: 5137-55-3) belongs to organic chlorides. Organic chlorides can be used in production of: PVC, pesticides, chloromethane, teflon, insulators. Aliphatic organochlorides are often alkylating agents as chlorine can act as a leaving group, which can result in cellular damage.Product Details of 5137-55-3

Referemce:
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

In vitro screening for chemical inhibition of the iodide recycling enzyme, iodotyrosine deiodinase was written by Olker, Jennifer H.;Korte, Joseph J.;Denny, Jeffrey S.;Haselman, Jonathan T.;Hartig, Phillip C.;Cardon, Mary C.;Hornung, Michael W.;Degitz, Sigmund J.. And the article was included in Toxicology In Vitro in 2021.Application In Synthesis of N-Methyl-N,N-dioctyloctan-1-aminium chloride The following contents are mentioned in the article:

The iodide recycling enzyme, iodotyrosine deiodinase (IYD), is a largely unstudied mol. mechanism through which environmental chems. can potentially cause thyroid disruption. This highly conserved enzyme plays an essential role in maintaining adequate levels of free iodide for thyroid hormone synthesis. Thyroid disruption following in vivo IYD inhibition has been documented in mammalian and amphibian models; however, few chems. have been tested for IYD inhibition in either in vivo or in vitro assays. Presented here are the development and application of a screening assay to assess susceptibility of IYD to chem. inhibition. With recombinant human IYD enzyme, a 96-well plate in vitro assay was developed and then used to screen over 1800 unique substances from the U. S. EPA ToxCast screening library. Through a tiered screening approach, 194 IYD inhibitors were identified (inhibited IYD enzyme activity by 20% or greater at target concentration of 200μM). 154 chems. were further tested in concentration-response (0.032-200μM) to determine IC50 and rank-order potency. This work broadens the coverage of thyroid-relevant mol. targets for chem. screening, provides the largest set of chems. tested for IYD inhibition, and aids in prioritizing chems. for targeted in vivo testing to evaluate thyroid-related adverse outcomes. This study involved multiple reactions and reactants, such as N-Methyl-N,N-dioctyloctan-1-aminium chloride (cas: 5137-55-3Application In Synthesis of N-Methyl-N,N-dioctyloctan-1-aminium chloride).

N-Methyl-N,N-dioctyloctan-1-aminium chloride (cas: 5137-55-3) belongs to organic chlorides. Organochlorines stimulate the central nervous system and cause convulsions, tremor, nausea, and mental confusion. Examples are dichlorodiphenyltrichloroethane (DDT), chlordane, lindane, endosulfan, and dieldrin. Alkyl chlorides are versatile building blocks in organic chemistry. While alkyl bromides and iodides are more reactive, alkyl chlorides tend to be less expensive and more readily available.Application In Synthesis of N-Methyl-N,N-dioctyloctan-1-aminium chloride

Referemce:
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Development of ionic liquid filled chitosan capsules to remove Cr(VI) from acidic solution: Adsorption properties and mechanism was written by Lin, Xiaoyu;He, Xi;Lei, Ling;Zhao, Yufeng;Cui, Longzhe;Wu, Guiping. And the article was included in Journal of Environmental Chemical Engineering in 2022.Category: chlorides-buliding-blocks The following contents are mentioned in the article:

Cr(VI)-contaminated water poses a serious threat to the environment. In this study, capsule-type biosorbent Aliquat-336-filled chitosan capsules (AFCCs) were prepared by a simple and gentle method for more efficient and eco-friendly removal of Cr(VI). The exptl. results show that the uptake of Cr(VI) by AFCCs increased with increasing Aliquat-336 content. The AFCCs show excellent stability under acidic conditions, and the maximum adsorption capacity was reached at a pH of 2. The maximum adsorption capacity of AFCCs for Cr(VI) was 110.94± 5.07 mg/g at 20°C, which was calculated based on the Langmuir model. The kinetic results show that the adsorption rate control process changed from liquid film diffusion to a chem. reaction with increasing shaking rate. In addition, the AFCCs and adsorption-reduction mechanism of Cr(VI) were characterized by digital photog., electron microscope, zeta potential, Fourier-transform IR spectroscopy (FT-IR) and XPS. The results indicated that the electrostatic attraction between quaternary amine groups in Aliquat-336 and Cr(VI) anions plays a major role in the removal of Cr(VI). Subsequently, the adsorbed Cr(VI) obtained electrons from C-C/C-H and -NH+3/-NH+2- were reduced to Cr(III), while C-C/C-H and -NH+3/-NH+2- were oxidized to C-O, C=O, =NH+-, =N- and N-O, resp. This study involved multiple reactions and reactants, such as N-Methyl-N,N-dioctyloctan-1-aminium chloride (cas: 5137-55-3Category: chlorides-buliding-blocks).

N-Methyl-N,N-dioctyloctan-1-aminium chloride (cas: 5137-55-3) belongs to organic chlorides. An organic chloride is an organic compound containing at least one covalently bonded atom of chlorine. Their wide structural variety and divergent chemical properties lead to a broad range of names and applications. Alkyl chlorides are versatile building blocks in organic chemistry. While alkyl bromides and iodides are more reactive, alkyl chlorides tend to be less expensive and more readily available.Category: chlorides-buliding-blocks

Referemce:
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Polarity-controlled deep eutectic solvents-based biphasic system for the selective separation of geniposidic acid and aucubin from Eucommia ulmoides male flowers was written by Wang, Yicong;Liu, Leilei;Tan, Zhijian. And the article was included in Journal of Molecular Liquids in 2022.Electric Literature of C25H54ClN The following contents are mentioned in the article:

Owing to their unique characteristics, deep eutectic solvents (DESs) have the potential to replace organic solvents in the extraction and separation of chems. from natural sources. In this study, a novel biphasic system composed of hydrophilic and hydrophobic DESs was designed for the selective separation of geniposidic acid (GPA) and aucubin (AU) from Eucommia ulmoides male flowers. Fifteen DESs with different hydrophilicity/hydrophobicity were used to design the biphasic system. The biphasic system designed using tetra-Bu ammonium chloride-hexanoic acid and choline chloride-D, L-malic acid was found to be an optimal extraction system. The influence of the phase volume ratio, system concentration, water content in the DESs, equilibrium temperature, and pH of the phosphate buffer solution was investigated through single-factor experiments Under optimal conditions, maximum extraction efficiencies were observed for GPA in the top phase (EGPA = 94.59%) and AU in the bottom phase (EAU = 80.41%). Further, d. functional theory calculations indicated that H-bond interaction was the main factor influencing the selective separation of GPA and AU. This DES-based biphasic system is efficient and environmentally friendly and could be used in the separation of other homologues present in natural products. This study involved multiple reactions and reactants, such as N-Methyl-N,N-dioctyloctan-1-aminium chloride (cas: 5137-55-3Electric Literature of C25H54ClN).

N-Methyl-N,N-dioctyloctan-1-aminium chloride (cas: 5137-55-3) belongs to organic chlorides. Chlorination modifies the physical properties of hydrocarbons in several ways. These compounds are typically denser than water due to the higher atomic weight of chlorine versus hydrogen. Aliphatic organochlorides are often alkylating agents as chlorine can act as a leaving group, which can result in cellular damage.Electric Literature of C25H54ClN

Referemce:
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

New metal-free nanolubricants based on carbon-dots with outstanding antiwear performance was written by Chimeno-Trinchet, C.;Pacheco, M. E.;Fernandez-Gonzalez, A.;Diaz-Garcia, M. E.;Badia-Laino, R.. And the article was included in Journal of Industrial and Engineering Chemistry in 2020.COA of Formula: C25H54ClN The following contents are mentioned in the article:

Nanoparticles have already demonstrated a good performance in improving the wear and/or coefficient of friction when used as nanolubricants. Nevertheless, they show two main drawbacks: most of them are metal-based and, therefore, eco-unfriendly, and they are mostly hydrophilic and, consequently, unstable in organic media, which finally drives to aggregation/sedimentation and the loose of the good properties. In this work, we carry out the synthesis of carbon-based nanoparticles for additives in lubricants from two different approaches: either using ionic liquids as carbons source, or using glutathione as carbon source and decorating the so-obtained carbon dots with the big organic cations of the ionic liquid The final materials (diameters between 2.2 and 3.5 nm) were characterized by TEM, FTIR, XPS, and luminescent methodologies, finding long-term stability of the suspensions in organic media (≥15 days). Carbon dots obtained directly from the ionic liquids, in particular from methyltrioctylammonium chloride (MTOACDs) have demonstrated to be the best candidate as additive in different base oils (0.1%, w/v) and lubrication regimes, reducing the coefficient of friction about 30% and wear scar in more than 60% in the most extreme of the tested conditions (120 N). Addnl., nanolubricants are metal-free and therefore, more eco-friendly than classic additives. This study involved multiple reactions and reactants, such as N-Methyl-N,N-dioctyloctan-1-aminium chloride (cas: 5137-55-3COA of Formula: C25H54ClN).

N-Methyl-N,N-dioctyloctan-1-aminium chloride (cas: 5137-55-3) belongs to organic chlorides. Chlorination modifies the physical properties of hydrocarbons in several ways. These compounds are typically denser than water due to the higher atomic weight of chlorine versus hydrogen. Aryl chlorides may be prepared by the Friedel-Crafts halogenation, using chlorine and a Lewis acid catalyst.COA of Formula: C25H54ClN

Referemce:
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Membrane support formulation and carrier selection in supported liquid membrane for extraction of zwitterionic form of Glutamic acid was written by Rajendaren, Vikneswary;Saufi, Syed M.;Zahari, M. A. K. M.;Mohammad, Abdul Wahab. And the article was included in Materials Today: Proceedings in 2021.Safety of N-Methyl-N,N-dioctyloctan-1-aminium chloride The following contents are mentioned in the article:

Glutamic acid (GA) is an amino acid which is usually appear in the zwitterionic form in solutions At present, cation and anion exchange carriers are widely use to extract this amino acids. However, the carriers only function either at high pH or low pH. Although, the pH can be adjusted by adding certain chem. to reach acidic or basic region, but it may lead to addnl. byproducts formation and affect the extraction process. In the current study, supported liquid membrane (SLM) was used to extract the zwitterionic form of GA from the aqueous solution without any pH adjustment. In the SLM process, the determination of the best carrier in liquid membrane formulation is important for achieving high extraction of GA. Hence, different types of carriers such as trioctylamine (TOA), tridodecylamine (TDA), tri-n-octyl phosphine oxide (TOPO), mixture of 50% TOA and 50% TDA, aliquat 336 and di-2-ethylhexyl phosphoric acid (D2EHPA) in 2-ethyl-1-hexanol were investigated. The polyethersulfone (PES) membrane with and without graphene membrane supports were prepared, characterized and used as the support in the SLM. The incorporation of graphene in PES membrane had increased the surface contact angle and tensile stress from 80.96 ± 1.92° to 97.8 ± 1.46° and 650.684 kPa to 1079.59 kPa, resp. Aliquat 336 was identified as the best carrier with 93% of GA extraction This study involved multiple reactions and reactants, such as N-Methyl-N,N-dioctyloctan-1-aminium chloride (cas: 5137-55-3Safety of N-Methyl-N,N-dioctyloctan-1-aminium chloride).

N-Methyl-N,N-dioctyloctan-1-aminium chloride (cas: 5137-55-3) belongs to organic chlorides. Organic chlorides can cause corrosion in pipelines, valves and condensers, and cause catalyst poisoning. The hydrocarbon processing industry (HPI) and others are affected by damage caused by these substances. Alkanes and aryl alkanes may be chlorinated under free radical conditions, with UV light. However, the extent of chlorination is difficult to control.Safety of N-Methyl-N,N-dioctyloctan-1-aminium chloride

Referemce:
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics