Author: Jessica.F

Adding a certain compound to certain chemical reactions, such as: 93-50-5, name is 4-Chloro-2-methoxyaniline, belongs to chlorides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 93-50-5, category: chlorides-buliding-blocks

General procedure: To a solution containing para-chloro-meta-fluoroaniline (10.0 g, 70.1 mmol) in 600 mL THF at 0 C was added Et3N (9.11 mL, 70.1 mmol) followed by ethyl oxalylchloride (7.70 mL, 70.1 mmol) dropwise over 15 minutes. The reaction mixture was warmed to room temperature and stirred for 18 hrs. The reaction mixture was filtered and the filter cake was washed with one-300 mL portion of ethyl acetate. The organic phase was washed with two-100 mL portions of 1M HCl, dried over MgSO4, filtered, and concentrated to give the product. Recrystallization from hot Et2O gave 14.4 g (84%) of 27 as a colorless crystalline solid.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Article; Lalonde, Judith M.; Elban, Mark A.; Courter, Joel R.; Sugawara, Akihiro; Soeta, Takahiro; Madani, Navid; Princiotto, Amy M.; Kwon, Young Do; Kwong, Peter D.; Schoen, Arne; Freire, Ernesto; Sodroski, Joseph; Smith III, Amos B.; Bioorganic and Medicinal Chemistry; vol. 19; 1; (2011); p. 91 – 101;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 38762-41-3, name is 4-Bromo-2-chloroaniline, A new synthetic method of this compound is introduced below., COA of Formula: C6H5BrClN

Synthesis of 2-chloro-4-(4,4, 5,5-tetramethyl- 1,3 ,2-dioxaborolan-2-yl)aniline (22):A mixture of 4-bromo-2-chloroaniline (5 g, 24.4 mmol), 4,4,4?,4?,5,5,5?,5?-octamethyl-2,2?- bi(1,3,2-dioxaborolane) (6.8 g, 26.8 mmol), Pd(dppf)C12 (1.8 g, 2.4 mmol) and KOAc (4.8 g, 48.8 mmol) in dioxane (80 mL) was degassed and heated at 100C for 6 h. After cooling down to room temperature, the reaction mixture was filtered. The filtrate was concentrated under reduced pressure and purified by silica gel chromatography (0-25% EtOAc/petroleum ether) to give 4.7 g of 2-chloro-4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)aniline 22 as yellow solid (63% yield). LCMS: m/z 254.1 [M+H], , tR= 2.02 min

The synthetic route of 38762-41-3 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; KARYOPHARM THERAPEUTICS INC.; BALOGLU, Erkan; SHACHAM, Sharon; SENAPEDIS, William; (153 pag.)WO2017/31213; (2017); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Application of 2687-12-9,Some common heterocyclic compound, 2687-12-9, name is Cinnamyl chloride, molecular formula is C9H9Cl, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: A representative procedure of skeleton 4 is as follows: K2CO3 (400 mg, 2.9 mmol) was added to a solution of 3 (1.0 mmol) in acetone (10 mL) at rt. The reaction mixture was stirred at rt for 10 min. Cinnamyl chloride (1.05 mmol) was added to the reaction mixture at rt. The reaction mixture was stirred at reflux for 8 h. The reaction mixture was cooled to rt, concentrated, and extracted with CH2Cl2 (3¡Á20 mL). The combined organic layers were washed with brine, dried, filtered, and evaporated to afford crude product under reduced pressure. Purification on silica gel (hexanes/EtOAc=6:1 to 1:1) afforded 4.

The synthetic route of 2687-12-9 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Chang, Meng-Yang; Lu, Yi-Ju; Cheng, Yu-Chieh; Tetrahedron; vol. 71; 8; (2015); p. 1192 – 1201;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 363-51-9, name is 2-Chloro-6-fluoroaniline, This compound has unique chemical properties. The synthetic route is as follows., COA of Formula: C6H5ClFN

General procedure: NaOt-Bu (0.240 g, 2.5 mmol), Pd(OAc)2 (0.006 g, 0.025 mmol) and [HPt-Bu3][BF4] (0.010 g, 0.035 mmol) were suspended in toluene (3 ml) in a 5 ml microwave vial. The appropriate 2-chloroaniline (0.50 mmol) and aryl bromide (0.50 mmol) were then added and the vial sealed. The reaction was then heated in the microwave reactor at 160 C for 3 h, allowed to cool, and then quenched by addition of aqueous HCl (2 M, 3 ml). The organic phase was extracted with CH2Cl2 (2¡Á20 ml), dried (MgSO4), then filtered and the solvent removed under reduced pressure. The crude product mixture was then subjected to column chromatography (SiO2).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 363-51-9.

Reference:
Article; Bedford, Robin B.; Bowen, John G.; Weeks, Amanda L.; Tetrahedron; vol. 69; 22; (2013); p. 4389 – 4394;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Electric Literature of 139512-70-2,Some common heterocyclic compound, 139512-70-2, name is 4-Chloro-5-fluorobenzene-1,2-diamine, molecular formula is C6H6ClFN2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: A mixture of compounds 1a-l (0.013 mol) and 4-chloro-5-fluoro-ophenylenediamine(2) (0.01 mol) in methanol (10 mL) was irradiatedwith ultrasonic irradiation at 50 C for 7 min (8 min for 3a) Afterreaction completion (monitored by TLC, ethyl acetate/hexane = 3:1), themixture was poured onto water and the precipitated product was filtrated off, washed with water and recrystallised from ethanol/water, 3:1.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 4-Chloro-5-fluorobenzene-1,2-diamine, its application will become more common.

Reference:
Article; Mente?e, Emre; Kahveci, Bahittin; Mente?e, Meltem; Journal of Chemical Research; vol. 42; 6; (2018); p. 329 – 331;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 172921-33-4, name is 1-Bromo-4-chloro-2,5-difluorobenzene, belongs to chlorides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 172921-33-4, Recommanded Product: 1-Bromo-4-chloro-2,5-difluorobenzene

1-Bromo-4-chloro-2,5-difluorobenzene (1.11 g, 4.9 mmol) was dissolved in tetrahydrofuran (THF; 15 mL) and cooled to -10¡ã C. A 2.0M solution of isopropyl-magnesium chloride (2.7 mL, 5.4 mmol) in THF was added dropwise via syringe. The reaction mixture was stirred at -10¡ã C. for 1 h, allowed to warm toward 0¡ã C. for 1 h, then cooled again to -10¡ã C. A solution of 2-isopropoxy-4,4,5,5-tetramethyl-1,3,2-dioxaborolane (1.0 g, 5.4 mmol) in THF (1.0 mL) was then added dropwise and the reaction mixture was allowed to warm to ambient temperature. The reaction mixture was then added to diethyl ether and extracted with 1N sodium hydroxide twice. The aqueous phases were combined, acidified to pH 3 with concentrated HCl, and extracted with dichloromethane twice. The organic phases were combined, dried, filtered and concentrated to give the title compound (0.97 g, 72.3percent yield) that was used without further purification: 1H NMR (CDCl3) delta 7.45 (dd, 1H), 7.09 dd, 1H), 1.36 (s, 12H).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; Dow AgroSciences LLC; US2009/88322; (2009); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 6940-78-9, name is 1-Bromo-4-chlorobutane, A new synthetic method of this compound is introduced below., Quality Control of 1-Bromo-4-chlorobutane

Step 1: Synthesis of 1-(4-Chlorobutyl)-1,5,6,7-tetrahydroindol-4-one To a solution of 1,5,6,7-tetrahydroindol-4-one (10.0 g) in DMSO (100 mL) was added powdered sodium hydroxide (3.26 g) and the mixture was stirred at ambient temperature for 0.25 hours. 1-Bromo-4-chlorobutane (9.38 mL) was then added and the resulting mixture stirred at ambient temperature for 7 hours after which time TLC (ethyl acetate:dichloromethane 1:1) showed complete reaction. The reaction was poured into ice cold water (250 mL) and stirred for 0.5 hours. An oil separated and was isolated with a separatory funnel. The aqueous layer was extracted with dichloromethane (50 mL). The oil was dissolved with dichloromethane (25 mL) and the combined organics were dried with sodium sulfate, filtered and the solvent removed under vacuum. Flash chromatography (ethyl acetate:hexane, 1:1 to 2:1) yielded an oil (6.0 g) as the titled compound.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; HELTON, David; FICK, David; US2009/264443; (2009); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Related Products of 3228-99-7, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 3228-99-7, name is Pentaerythrityl Tetrachloride belongs to chlorides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

General procedure: In the ovenDriedNitrogen gas in a stainless steel high pressure reactor with a capacity of 75 millilitersUnder0.4 g (0.16 mmol)And tributylphosphine immobilized on chloropropyl silsesukuoxen15 g (0.13 mol) of chloroform and 52.8 g(0.39 mol) of trichlorosilane was added. Seal the reactorAfter reacting at 150 for 2 hours, the reactant was distilled under reduced pressure.18.9 g (yield 51.3%) of bis (trichlorosilyl) methane was obtained

The synthetic route of Pentaerythrityl Tetrachloride has been constantly updated, and we look forward to future research findings.

Reference:
Patent; JSI Silicone Co., Ltd.; Jeong Il-nam; Kim Eun-seong; Kim Seong-min; Kim Yeong-min; (13 pag.)KR2020/15644; (2020); A;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 7149-75-9, name is 4-Chloro-3-methylaniline, belongs to chlorides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 7149-75-9, Product Details of 7149-75-9

tert-butyl 4-oxopiperidine-l-carboxylate (1 g, 5.02 mmol) and 4-chloro-3- methylaniline (711 mg, 5.02 mmol), were dissolved in DCE (30 mL) and acetic acid (287 mul, 5.02 mmol) was added. The reaction was stirred at 60 ¡ãC for 6 h. The reaction was allowed to cool and Sodium Tri(acetoxy)borohydride (1.49 g, 7.03 mmol) was added. The reaction was then stirred at room temperature for 18 h, then washed with water and brine. The organic layer was dried and concentrated, then purified using column chromatography (Biotage, 25g SNAP KP-SIL, 100percent DCM, 10CV). The crude product was then purified a second time using low pH reverse phase column chromatography to yield a white solid (130 mg, 8percent). LCMS Method D: rt 1.64 min, 92 percent; m/z. 269.1 (MH+-*Bu)

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; PRESIDENT AND FELLOWS OF HARVARD COLLEGE; EVOTEC INTERNATIONAL GMBH; GAMPE, Christian, M.; KAHNE, Daniel, Evan; KAHNE, Suzanne, Walker; QIAO, Yuan; EAST, Stephen; PARKES, Alastair, L.; SOUTHEY, Michelle; HUNTER, James; WHITTAKER, Mark; ARTHUIS, Martin; (359 pag.)WO2016/191658; (2016); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Reference of 1127-85-1, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 1127-85-1, name is 2,4-Dichloro-5,6,7,8-tetrahydroquinazoline belongs to chlorides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

To a stirred suspension of INT-6 (339 mg, 1.13 mmol) in anhydrous DMF (25 mL) was added t-BuOK (1M in THF, 2.26 mL, 2.26 mmol) at 0 C. dropwise to give a brown solution. The resulting solution was stirred for further 0.5 h at this temperature. 2,4-dichloro-5,6,7,8-tetrahydroquinazoline (299.1 mg, 1.13 mmol) in DMF (5 mL) was added dropwise to the above solution and the reaction was stirred overnight at room temperature. The reaction mixture was partitioned between ethyl acetate (30 mL) and water (40 mL), the organic layer was separated and the aqueous layer was extracted with ethyl acetate (2¡Á30 mL). The combined organic layers were washed with brine (80 mL) and the organic layer was separated, dried over Na2SO4, filtered and concentrated under reduced pressure. Purification by preparative HPLC afforded I-109 (87.4 mg, 29.2%) as a yellow solid. 1H NMR (400 MHz, DMSO-d6): delta 9.34 (d, J=9.2 Hz, 1H), 8.71 (s, 1H), 8.18-8.11 (m, 2H), 7.83 (d, J=9.2 Hz, 1H), 7.58 (d, J=9.2 Hz, 1H), 7.10-7.20 (m, 1H), 3.70 (s, 2H), 3.60-3.50 (m, 1H), 3.52-3.36 (m, 6H), 2.63-2.60 (m, 2H), 2.29 (s, 3H), 1.17 (d, J=7.8 Hz, 3H), 1.06 (t, J=7.8 Hz, 3H). MS m/z (M+H): 527.0.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2,4-Dichloro-5,6,7,8-tetrahydroquinazoline, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Celgene Avilomics Research, Inc.; Alexander, Matthew David; Chuaqui, Claudio; Malona, John; McDonald, Joseph John; Ni, Yike; Niu, Deqiang; Petter, Russell C.; Singh, Juswinder; (164 pag.)US2016/75720; (2016); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics