Author: Jessica.F

Electric Literature of 918538-05-3, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 918538-05-3 name is 2,4-Dichloropyrrolo[2,1-f][1,2,4]triazine, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

General procedure: To a solution of 2,4-dichloropyrrolo[1,2-f][1,2,4]triazine (4a) (0.5 g, 2.7 mmol) in 2-Propanol (6 mL) was added (S)-pyrrolidin-2-ylmethanol (0.39 mL, 4.0 mmol), DIPEA (1.39 mL, 8.0 mmol) and heated at 90 C for 1 hr. The reaction was cooled to room temperature and solid obtained was collected by filtration to afford (S)-(l-(2-chloropyrrolo[2,l-f][l,2,4]triazin-4- yl)pyrrolidin-2-yl)methanol (96a) (0.49 g, 73 % yield) as a white solid; NMR (300 MHz, DMSO-i/e): delta 7.70 (dd, J= 2.6, 1.4 Hz, 1H), 6.97 (dd, J= 4.7, 1.6 Hz, 1H), 6.80 – 6.57 (m, 1H), 5.15 (t, J = 5.7 Hz, 1H, D2O exchangeable), 4.87 (t, J= 5.7 Hz, 1H), 4.44 (d, J= 17.8 Hz, 1H), 4.05 – 3.82 (m, 1H), 3.72 – 3.39 (m, 2H), 2.22 – 1.84 (m, 4H). MS (ES+): 253.3, 255.3 (M+2); MS (ES-): 287.2, 289.2 (M+Cl).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 2,4-Dichloropyrrolo[2,1-f][1,2,4]triazine, and friends who are interested can also refer to it.

Reference:
Patent; BIOCRYST PHARMACEUTICALS, INC.; KOTIAN, Pravin, L.; BABU, Yarlagadda, S.; KUMAR, V., Satish; ZHANG, Weihe; LU, Peng-Cheng; RAMAN, Krishnan; (747 pag.)WO2018/232094; (2018); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Synthetic Route of 2533-69-9, These common heterocyclic compound, 2533-69-9, name is Methyl 2,2,2-trichloroacetimidate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A three-necked flask was charged with 10 mL of dimethylformamide and 0.26 g (0.001 mol) of alpha-N-Boc-L-Lys-OMe. To this solution was added 0.35 g (0.002 mol) of methyl trichloroacetimidate and 0.53 mL (0.003 mol) of diisopropylethylamine. This solution was allowed to stir and warm to 25 C. overnight. Concentration in vacuo removed the dimethylformamide.

Statistics shows that Methyl 2,2,2-trichloroacetimidate is playing an increasingly important role. we look forward to future research findings about 2533-69-9.

Reference:
Patent; G. D. Searle & Co.; US6344483; (2002); B1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Electric Literature of 115843-99-7,Some common heterocyclic compound, 115843-99-7, name is 4-Bromo-3-chloro-2-fluoroaniline, molecular formula is C6H4BrClFN, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Example 9: Synthesis of boronate fragment 9b (used in Example 43)Anhydrous DMF (60 mL) is added to a flask charged with bromide 9a (5.00 g, 22.2 mmol), /?/s-(pinacolato)diborone (8.48 g, 33.4 mmol) and potassium acetate (6.35 g, 66.8 mmol) and the resulting suspension is deoxygenated by bubbling a stream of N2 gas through the mixture for 45 min. 1 ,1′-bis(diphenylphosphino)ferrocene (2.73 g, 3.34 mmol) is then added and the mixture is deoxygenated for approximately a further 5 min and is then heated to 950C. After 16 h, the dark reaction mixture is cooled, extracted with EtOAc (500 mL and 300 mL) and washed with 1 :1 water/brine (600 mL) and brine (600 mL). The combined extracts are dried over anhydrous MgSO4, filtered and evaporated to a black syrup which is purified by flash column chromatography (EtOAc/hexanes) to afford the boronate 9b as white solid contaminated with <25 % of the diboron reagent (4.24 g, 62% yield). These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 4-Bromo-3-chloro-2-fluoroaniline, its application will become more common. Reference:
Patent; BOEHRINGER INGELHEIM INTERNATIONAL GmbH; WO2009/62285; (2009); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 1996-29-8, name is 1-Bromo-4-chloro-2-fluorobenzene belongs to chlorides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below. HPLC of Formula: C6H3BrClF

1-Bromo-4-chloro-2-fluorobenzene (61g, 291mmol), 2,6-dimethoxyphenylboronic Acid (50.4g, 277mmol), K2CO3 (60.4g, 437mmol) and Pd(PPh3)4 (10.1g, 8.7mmol) were added to a round bottom flask and dissolved in THF (500ml) and distilled water (200ml) and stirred under reflux at 60 C for 12 hours. After completion of the reaction, remove the water layer and perform column chromatography (Hexane: DCM (20%)), by using the intermediate (Int-1) to afford 38g (51%)

The synthetic route of 1996-29-8 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Samsung SDI Co., Ltd; Samsung Electronics Co., Ltd.; Lee Seung-jae; Kim Chang-u; Kim Byeong-gu; Kim Hyeong-seon; Ryu Dong-wan; Shin Chang-ju; Jang Gi-po; Seo Min-seok; Jeong Seong-hyeon; (39 pag.)KR102044943; (2019); B1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 39989-43-0, name is 3,5-Dichlorobenzylamine, This compound has unique chemical properties. The synthetic route is as follows., SDS of cas: 39989-43-0

1 -(2-(3 ,5-DichloiObenzylamino)-4-fluoro-nitrobenzene:; A mixture of 2,4-difluoronitrobenzene (5.0 mmol), 3,5-dichlorobenzylamine (5.0 mmol), N, N- diisopropylethylamine (10.0 mmol) and acetonitrile (25 mL) was heated at reflux for 18 h, cooled and concentrated in vacuo. The residue was dissolved in ethyl acetate; this solution was washed with water, dried over Na2SO4 and concentrated in vacuo. The residue was purified by flash column chromatography on silica gel using 5 % ethyl acetate in hexanes as eluent to yield the title compounds as a yellowish solid (46 %). 1H NMR (400 MHz, CDCl3): delta 9.28 (br s, 1 H)5 7.88 (m, 1 H)5 7.34 (s, 1 H)5 7.22 (s, 2 H), 6.44 (m, 1 H), 6.30 (dd, 1 H), 4.43 (d, 2 H).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 39989-43-0.

Reference:
Patent; PREDIX PHARMACEUTICALS HOLDINGS, INC.; WO2006/81332; (2006); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

These common heterocyclic compound, 57946-56-2, name is 4-Chloro-2-fluoroaniline, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Quality Control of 4-Chloro-2-fluoroaniline

Example 3 Production of the nitroaniline (XIII):- 4-Chloro-2-fluoroaniline (23 g) was dissolved in conc, sulfuric acid (120 ml), and the resultant mixture was cooled to -20C, followed by dropwise addition of fuming nitric acid (15 g). The reaction mixture was stirred at -20 to -15C for 1.5 hours, poured into ice-water and then extracted with ether. The ether extract was washed with water and a saturated sodium bicarbonate solution, dried and concentrated. The residue was crystallized from a mixture of toluene and hexane (2: 1) to obtain 20 g of 4-chloro-2-fluoro-5-nitroaniline. M.P., 83 – 84.5C.

The synthetic route of 4-Chloro-2-fluoroaniline has been constantly updated, and we look forward to future research findings.

Reference:
Patent; SUMITOMO CHEMICAL COMPANY, LIMITED; EP208374; (1991); B1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Reference of 39065-95-7, A common heterocyclic compound, 39065-95-7, name is 4-(Chlorodifluoromethoxy)aniline, molecular formula is C7H6ClF2NO, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a mixture of 3-bromo-4-(methylamino)-5-nitrobenzoic acid (6a, 1.27 g, 6.54 mmol, 1.2 eq) and 4-(chlorodifluoromethoxy)aniline (1h, 1.50 g, 5.45 mmol, 1 eq) in DMF (10 mL) was added HATU (2.28 g, 6.00 mmol, 1.1 eq) and DIEA (775.28 mg, 6.00 mmol, 1.04 mL, 1.1 eq) in one portion. The mixture was heated to 30 C. and stirred for 12 hours. LC-MS showed one main peak with desired mass was detected. The mixture was concentrated and the resulting residue was purified by column chromatography (SiO2, petroleum ether:ethyl acetate=20:1 to 5:1) to yield 6b as a yellow solid.

The synthetic route of 39065-95-7 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Terns, Inc.; ROMERO, F. Anthony; KIRSCHBERG, Thorsten A.; HALCOMB, Randall; XU, Yingzi; (144 pag.)US2020/87283; (2020); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 932-32-1, name is 2-Chloro-N-methylaniline belongs to chlorides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below. Quality Control of 2-Chloro-N-methylaniline

General procedure: Ureas used in this project were prepared according to reaction equation (1)-(3) and related procedures given below. A 100 mL two-necked flask with a magnetic stir bar was evacuated and backfilled with argon three times. Amine (2 eq) was dissolved in THF. A solution of n-BuLi (2.5 M in hexane, 1.0 eq) was added slowly at -40 C and the resulting mixture was stirred for 15 min at the same temperature. After cooling to -60 C, iodomethane (1.0 eq) was added slowly and the mixture was allowed to warm to rt and stirred for additional 8 h at rt. The mixture was quenched by adding H2O and the organic phase was separated. The aqueous phase was extracted with EtOAc and the combined organic phases were washed with sat. NaHCO3-solution, dried over Na2SO4 and the solvents were evaporated under reduced pressure. After purification by flash chromatography the pure product was obtained. A 100 mL two-necked flask with a magnetic stir bar was evacuated and backfilled with argon three times. Triphosgene (5.0 mmol) and CH2Cl2 (30 mL) were added to the flask. The mixture was cooled at -30 C and dry pyridine (3.0 mL) was slowly added to the flask (Caution: highly toxic phosgene was generated). After stirring for 15 min at -30 C, secondary amine (10 mmol) was slowly added to the mixture. The mixture was warmed to room temperature and stirred for 6 h at room temperature. The reaction mixture was carefully quenched by 1N HCl (10 mL) and was extracted with CH2Cl2 (5 mL x 3). The organic layer was washed with water and brine, then dried over Na2SO4. After the filtration, the solution was concentrated to dryness. The crude product was purified by silica gel column chromatography. Further purification was carried out by recrystallization or distillation under vacuum. MeNH2 methanol solution (33.3%) (1.5 equiv.), acid chloride (1.0 equiv.), Et3N (2.0 equiv.) and CH2Cl2 (0.5 M) were added into a round bottom flask capped with a septum. The mixture was stirred at room temperature. After 2 h, the crude reaction mixture was extracted with CH2Cl2, purified by flash chromatography.

The synthetic route of 932-32-1 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Wang, Yan; Zhou, Hao; Xu, Ke; Shen, Mei-Hua; Xu, Hua-Dong; Chinese Chemical Letters; vol. 28; 1; (2017); p. 92 – 96;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 933190-51-3, name is 8-Bromo-6-chloroimidazo[1,2-b]pyridazine, A new synthetic method of this compound is introduced below., HPLC of Formula: C6H3BrClN3

To a stirred solution of phenylmethanol (3.35 g, 31 mmol, 1.2 eq) in THF (80 mL), NaH (60% dispersion in mineral oil, 1.34 g, 33.5 mmol, 1.3 eq) is added in portions. The resulting mixture is stirred at RT for 30 min and then 8-bromo-6-chloroimidazo[1,2-b]pyridazine (D-3) (6 g, 25.8 mmol, 1.0 eq) is added. The resulting mixture is stirred at RT for an additional 2 h and then poured into water (30 mL). The mixture is extracted with ethyl acetate (2*100 mL). The combined organic layers are washed with brine, dried over Na2SO4 and filtered. The filtrate is concentrated in vacuo to afford the product, 8-(benzyloxy)-6-chloroimidazo[1,2-b]pyridazine (D-4).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Ren, Pingda; Liu, Yi; Li, Liansheng; Chan, Katrina; Wilson, Troy Edward; Castro, Alfredo C.; Evans, Catherine A.; Snyder, Daniel A.; US2012/122838; (2012); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Some common heterocyclic compound, 108-70-3, name is 1,3,5-Trichlorobenzene, molecular formula is C6H3Cl3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. COA of Formula: C6H3Cl3

General procedure: An oven-dried and argon-flushed pressure tube was charged with 1,3,5-trichlorobenzene, 1,2,4-trichlorobenzene or 1,2,3-trichlorobenzene (0.25 mmol), Pd2(dba)2 (1.25 mol%), cataCXium A (5.0 mol%), boronic acid (1.5 mmol) and K3PO4 (1.5 mmol) followed by anhydrous toluene (4.0 mL). The tube was sealed with a Teflon valve and the reaction mixture was stirred at 110 C for 24 h. The cooled reaction mixture was diluted with water and extracted with DCM. The combined organic layers were dried (Na2SO4), filtered and the filtrate was concentrated in vacuo. The residue was purified by column chromatography.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 108-70-3, its application will become more common.

Reference:
Article; Reimann, Sebastian; Ehlers, Peter; Sharif, Muhammad; Spannenberg, Anke; Langer, Peter; Tetrahedron; vol. 72; 8; (2016); p. 1083 – 1094;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics