Author: Jessica.F

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 694-80-4 as follows. Product Details of 694-80-4

General procedure: Step 1: The substituted bromobenzene (1 equiv) and (3-formylphenyl)boronic acid or (4-formylphenyl) boronic acid (1 equiv) were dissolved in a mixture of 1M sodium carbonate aqueous solution (15mL), EtOH (5mL) and toluene (15mL). After nitrogen substitution, Pd(PPh3)4 (0.05 equiv) was added. The reaction mixture was stirred at 80C under nitrogen atmosphere for 12h. The reaction mixture was cooled, and water (15mL) was added. The mixture was diluted with AcOEt (15mL), and the insoluble material was filtered off through Celite. The organic layer of the filtrate was washed with brine, dried over anhydrous sodium sulfate, and concentrated in vacuo. The residue was purified by silica gel column chromatography using a mixture of petroleum ether/ethyl acetate (10:1, v/v) as eluent to afford the desired product 2a-r, 5a and 5b as a solid. Step 2: To a solution of 2a-r, 5a or 5b (1 equiv) in MeOH (10mL) and THF (20mL) was added portionwise sodium borohydride (3 equiv) at 0C and the mixture was stirred at 0C for 1h. The reaction mixture was pouring into ice water (10mL), and extracted with ethyl acetate (3×15mL), the organic fractions were combined, washed with saturated brine (2×15mL) prior to drying over anhydrous sodium sulfate. After filtration and concentrate using a rotary evaporator, the residue was used in next step without further purification. To a solution of the obtained solid (1 equiv) in dichloromethane (20mL) was slowly added thionyl chloride (6 equiv) and a catalytic amount of DMF at room temperature. After stirring at 40C for 4h, the reaction was concentrated under reduced pressure. The residue was purified by silica gel column chromatography using a mixture of petroleum ether/ethyl acetate (20:1, v/v) as eluent to afford the desired product.

According to the analysis of related databases, 694-80-4, the application of this compound in the production field has become more and more popular.

Reference:
Article; Li, Zheng; Liu, Chunxia; Xu, Xue; Qiu, Qianqian; Su, Xin; Dai, Yuxuan; Yang, Jianyong; Li, Huilan; Shi, Wei; Liao, Chen; Pan, Miaobo; Huang, Wenlong; Qian, Hai; European Journal of Medicinal Chemistry; vol. 138; (2017); p. 458 – 479;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Reference of 1435-50-3, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 1435-50-3, name is 2-Bromo-1,4-dichlorobenzene, This compound has unique chemical properties. The synthetic route is as follows.

Compound 4 – (4 – (1 – (phenyl-sulfonyl) -3 – vinyl – 1H – pyrrolo [2, 3 – b] pyridine -5 – yl) – 1H – pyrazole -1 – yl) piperidine -1 – carboxylic acid tert-butyl ester (205 mg, 0 . 95 mmol), 2 – bromo – 1, 4 – dichlorobenzene (500 mg, 0.9 mmol), Pd (OAc)2 (4 Mg, 0 . 018 mmol), PPh3 (9 Mg, 0 . 036 mmol), K2 CO3 (310 Mg, 2 . 25 mmol), TBAI (0.09 mmol, 33 mg) and anhydrous DMF (5 ml) the mixture under microwave conditions, for 170 C stirring reaction for 1 hour, cooled to the room temperature, the reaction liquid water (15 ml) washing, using EtOAc (10 mLx 3) extraction, the combined organic phase for salt water (30 ml) washing, anhydrous Na2 SO4 Drying, concentrated under reduced pressure, the residue by silica gel column chromatography (PE/EtOAc (v/v)=1/1) to obtain the title compound as a yellow solid (160 mg, 32%).

The chemical industry reduces the impact on the environment during synthesis 2-Bromo-1,4-dichlorobenzene. I believe this compound will play a more active role in future production and life.

Reference:
Patent; (88 pag.)CN104119331; (2018); B;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 13078-79-0, name is 2-(3-Chlorophenyl)ethanamine, A new synthetic method of this compound is introduced below., Computed Properties of C8H10ClN

To a solution of 2-(3-chlorophenyl)ethanamine (0.778 g, 5 mmol) and triethyl amine (1.05 mL, 7.5 mmol) in dichloromethane, was added 2,4,6- trimethylbenzene- l-sulfonyl chloride (1.09 g, 5 mmol) portion wise. The mixture was allowed to stir for 1 h at ambient temperature. The reaction mixture was washed with HC1 (2N) (3 x 50 mL), water and brine. The organic layer was dried over anhydrous MgS04 and concentrated in vacuo to obtain the title compound.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; THE SCRIPPS RESEARCH INSTITUTE; KAMENECKA, Theodore, Mark; BURRIS, Thomas; WO2014/85453; (2014); A2;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Related Products of 202197-26-0, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 202197-26-0 name is 3-Chloro-4-((3-fluorobenzyl)oxy)aniline, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

General procedure: Followed we described previously, substituted aniline (3.3 mol). The reaction mixture was heated to 130 and stirred for 15 min. The reaction mixture was then cooled to 25 . The acetic acid was evaporated. The reaction mixture was quenched in ice-water (25.0 mL), and adjusted pH~9 with ammonia solution. The mixture was stirred for 0.5 h. The precipitated product was filtered, and the filter cake was washed with water (3 × 10 mL) to afford crude product. The crude product was chromatographed by silica gel, eluting with EtOAc/PE (1:4) to afford residue 13a-13c as white solid (yield 84.3% ~ 92.5%). 1.2.1.1 4-(3-chloro-4-(3-fluorobenzyloxy)phenylamino)-6-iodoquinazoline (13a) White power, yield: 92.5%.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 3-Chloro-4-((3-fluorobenzyl)oxy)aniline, and friends who are interested can also refer to it.

Reference:
Article; Zhang, Yaling; Gao, Hongliang; Liu, Renjie; Liu, Juan; Chen, Li; Li, Xiabing; Zhao, Lijun; Wang, Wei; Li, Baolin; Bioorganic and Medicinal Chemistry Letters; vol. 27; 18; (2017); p. 4309 – 4313;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Some common heterocyclic compound, 622-24-2, name is (2-Chloroethyl)benzene, molecular formula is C8H9Cl, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Safety of (2-Chloroethyl)benzene

General procedure: One of 4a-d (1 equiv.) and K2CO3 (3 equiv.) in DMF was stirred at 90C for 1h, then the solution was allowed to cool to 60C and was added different substituted benzyl chlorides or phenyl ethyl chlorides (3 equiv.). The reaction mixture was stirred at 60C for another 7h and allowed to cool to room temperature. The saturated NH4Cl solution was added to quench the reaction. The mixture was diluted with water and extracted with ethyl acetate to afford the crude product that was purified by flash column chromatography on silica gel to yield the target products.4.1.5.1 3-Phenethylbenzo[d]oxazol-2(3H)-one (7a) [39] (0039) White solid. Yield 86%. Mp 116-118C. 1H NMR (300MHz, Chloroform-d): delta(ppm) 7.29 (d, J=7.7Hz, 3H), 7.20 (s, 3H), 7.10 (t, J=5.9Hz, 2H), 6.79 (d, J=7.1Hz, 1H), 4.06 (t, J=7.4Hz, 2H), 3.08 (t, J=7.2Hz, 2H). MS (EI): m/z 240.3 [M+H]+. IR (KBr): 3061, 1767, 1614, 1489, 1258cm-1.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 622-24-2, its application will become more common.

Reference:
Article; Zou, Yi; Wang, Yan; Wang, Fang; Luo, Minghao; Li, Yuezhen; Liu, Wen; Huang, Zhangjian; Zhang, Yihua; Guo, Wenjie; Xu, Qiang; Lai, Yisheng; European Journal of Medicinal Chemistry; vol. 138; (2017); p. 199 – 211;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

771583-81-4, name is 4-Chloro-2-(trifluoromethyl)benzylamine, belongs to chlorides-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. name: 4-Chloro-2-(trifluoromethyl)benzylamine

4-chloro-2-trifluoromethylbenzylamine (100.0 mg, 0.5 mmol), 1-bromo-2-fluoroethane (78.7 mg, 0.6 mmol) and potassium carbonate (138.2 mg, 1.0 mmol) were dissolved in acetonitrile (5mL),The reaction was heated to 80 C for 4 hours. The reaction solution was cooled to room temperature. The reaction solution was concentrated. The concentrate was purified by preparative thin layer chromatography (eluent: petroleum ether: ethyl acetate = 4: 1 (v: v)) to obtain the title compound (40.0 mg, yield: 30%).

The synthetic route of 771583-81-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Sichuan Kelun Botai Bio-pharmaceutical Co., Ltd.; Liu Chunchi; Liu Jinming; Cai Jiaqiang; Wang Lichun; Wang Jingyi; (25 pag.)CN110724076; (2020); A;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 870-24-6, name is 2-Chloroethanamine hydrochloride, A new synthetic method of this compound is introduced below., Formula: C2H7Cl2N

Step-I: 2-(2-Methyl-1H-pyrrol-1-yl)ethanamineSodium hydroxide anhydrous (9.87 g, 0.246 mol, 4.0 eq.) and TBAHS (0.838 g, 0.002 mol, 0.04 eq.) were added to a solution of 2-methyl-1 H-pyrrole (5.0 g, 0.061 mol, 1.0 eq.) in acetonitrile (180 ml) at 0 C and the mixture was stirred at RT for 1 h. 2-Chloroethylamine hydrochloride (8.59 g, 0.074 mol, 1.2 eq.) was added to the reaction mixture and it was then heated at reflux for 16 h. The reaction mixture was cooled to RT, filtered through celite and washed with 10% MeOH/DCM (200 ml). The filtrate was concentrated under reduced pressure to give the crude product which was used in the next step without further purification.Yield: 100 %, crude (7.6 g, 0.061 mol)

The synthetic route of 870-24-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; GRUeNENTHAL GMBH; REICH, Melanie; SCHUNK, Stefan; OBERBOeRSCH, Stefan; JOSTOCK, Ruth; GERMANN, Tieno; ENGELS, Michael; WO2012/28331; (2012); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 2106-04-9, name is 3-Chloro-2-fluoroaniline, This compound has unique chemical properties. The synthetic route is as follows., Recommanded Product: 3-Chloro-2-fluoroaniline

4. 0M HCI in Dioxane (4.0 ml) was added to a stirred suspension of 7- (benzyloxy)-4- chloro-6-methoxyquinazoline (CAS Registry NOL62364-72-9, prepared as described in W098/13354, Example 1) (60 g, 0.2 mol) and 3-CHLORO-2-FLUOROANILINE (31.96 g, 0.22 mol) in acetonitrile (1200 ml). The reaction mixture was heated at 80C for 1 hour then left to stand overnight. Acetonitrile (500 ml) was added and the resulting precipitate filtered, washed with acetonitrile (3 x 500 ml) and dried under vacuum to give 7- (BENZYLOXY)-N- (3-CHLORO-2- fluorophenyl) -6-methoxyquinazolin-4-amine hydrochloride as a beige solid (85.45 g, 96%);

According to the analysis of related databases, 2106-04-9, the application of this compound in the production field has become more and more popular.

Reference:
Patent; ASTRAZENECA AB; ASTRAZENECA UK LIMITED; WO2005/26150; (2005); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Application of 174913-12-3, The chemical industry reduces the impact on the environment during synthesis 174913-12-3, name is 1-Bromo-3-chloro-5-methoxybenzene, I believe this compound will play a more active role in future production and life.

Step a: A solution of l-bromo-3-chloro-5-methoxybenzene (835 mg, 3.77 mmol), and l,3,5-trichloro-l,3,5-triazinane-2,4,6-trione (299 mg, 1.29 mmol) in DMF (18 mL) was stirred 16 h under N2 and 50 C. After cooling to RT, the reaction mixture was diluted with aqueous NH4C1 and extracted with Et20. The combined organic phases were dried over MgS04, filtered, concentrated, and the resulting residue was purified by silica chromatography (0 to 25% gradient of EtO Ac/heptane) to l-bromo-2,3-dichloro-5-methoxybenzene (720 mg, 2.81 mmol). 1H NMR (400 MHz, CHLOROFORM-^ delta ppm 7.14 (d, J=2.76 Hz, 1 H), 7.01 (d, J=3.01 Hz, 1 H), 3.81 (s, 3 H).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1-Bromo-3-chloro-5-methoxybenzene, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; NOVARTIS AG; CHEN, Zhuoliang; DORE, Michael; FORTANET, Jorge Garcia; KARKI, Rajesh; KATO, Mitsunori; LAMARCHE, Matthew J.; PEREZ, Lawrence Blas; WILLIAMS, Sarah; SENDZIK, Martin; WO2015/107494; (2015); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Related Products of 51114-68-2, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 51114-68-2 as follows.

A solution of a (15 76 g, 100 mmol, 1.0 eq) in 3M HCI (100 mL) at 0 C was added dropwise a solution ofNaNC (7.59 g, 110 mmol, 1.1 eq) in water (20 mL). The mixture was stirred at 0 C for 30 min, then added to a solution of KI (49.8 g, 300 mmol, 3.0 eq) in water (40 mL). The resulting mixture was stirred at r.t. for 1 h, poured into water (100 mL), and extracted with EtOAc (150 mL x 2). The combined organic layers were washed with sat. NarSCb solution (50 mL x 2) and brine (50 ml, x 2) successively, and then dried with anhydrous NaiSOy filtered, and concentrated. The residue was purified by chromatography on silica gel (PE) to give b (26.0 g, 97%) as red liquid. LCMS: 2.68.9 i M · H | .

According to the analysis of related databases, 51114-68-2, the application of this compound in the production field has become more and more popular.

Reference:
Patent; SILICON SWAT, INC.; CHAMBERLAIN, Brian T.; RICE, James M.; JERNIGAN, Finith E., III; SHERMAN, Woody; KULKARNI, Meghana M.; SHECHTER, Sharon; ALLEN, Bryce K.; TAN, Dazhi; MARINO, Kristen A.; LIN, Zhixiong; (292 pag.)WO2019/100061; (2019); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics