Author: Jessica.F

Adding a certain compound to certain chemical reactions, such as: 112-26-5, name is 1,2-Bis(2-chloroethoxy)ethane, belongs to chlorides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 112-26-5, category: chlorides-buliding-blocks

7.7Ig (50 mmo 1) of 2,6-dimethoxyphenol and 8.42 g (45 mmol) of 1,2- (dichloroethane) ethane were added to IOOml of acetonitrile at a temperature of 20 C with stirring , 6.06 g (108 mmol) of potassium hydroxide was added thereto, and the temperature was raised to 82 C. After 92 hours of reaction, acetonitrile was distilled off at atmospheric pressure to obtain orange turbid liquid.[0027] IOOml dichloromethane was added to the above-mentioned orange turbid liquid 1, the insoluble matter was filtered off, washed twice with 50 ml of IM sodium hydroxide solution and twice with saturated sodium chloride solution (20 C) Dried over anhydrous magnesium sulfate and evaporated to dryness at atmospheric pressure to give a yellow oily liquid 2;[0028] To the above yellow oily liquid 3 was added 25 ml of diethyl ether, the temperature was raised to 35 C, the insoluble matter was filtered off, cooled to _15 C, cooled for 3 hours, the liquid was stratified, and the pale yellow solution was taken and cooled to -15 C (2- (2,6-dimethoxyphenoxy) ethoxy) ethane in a yield of 69.33% and a purity of 98.42% as a white powder

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1,2-Bis(2-chloroethoxy)ethane, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Xi’an Modern Chemical Institute; Lu Tingting; Ji Yueping; Zhang Lijie; Liu Yajing; Wang Wei; Pan Yongfei; Xu Minghui; Mo Hongchang; Lu Xianming; Ding Feng; (6 pag.)CN106946664; (2017); A;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Reference of 60811-21-4, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 60811-21-4, name is 4-Bromo-2-chloro-1-fluorobenzene belongs to chlorides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

To a dry-ice/ethanol cooled solution of compound S1 (20.0 g, 0.95 mol) in THF (200 mL) was added 2 M LDA (52 mL, 1.05 mol) dropwise over 30 min. After addition, the reaction mixture was stirred at this temperature for 30 min followed by the addition of DMF (10.5 g, 1.43 mol). The reaction was stirred for 30 min and warmed to room temperature slowly. The reaction mixture was then quenched with aq. NH4Cl (100 mL) and extracted with ethyl acetate (500 mL). The organic phase was washed with brine, dried over anhydrous Na2SO4, filtered, and concentrated. The residue was purified by column chromatography on silica gel (eluted with petroleum ether/ethyl acetate=1:0 to 50:1) to give compound S2 (10 g, yield 40%) as a yellow oil.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 4-Bromo-2-chloro-1-fluorobenzene, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; ACHILLION PHARMACEUTICALS, INC.; WILES, Jason, Allan; PHADKE, Avinash, S.; DESHPANDE, Milind; AGARWAK, Atul; CHEN, Dawei; GADHACHANDA, Venkat, Rao; HASHIMOTO, Akihiro; PAIS, Godwin; WANG, Qiuping; WANG, Xiangzhu; (905 pag.)WO2017/35353; (2017); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

These common heterocyclic compound, 883499-24-9, name is 1-Bromo-2-chloro-3-fluorobenzene, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Application In Synthesis of 1-Bromo-2-chloro-3-fluorobenzene

In a nitrogen atmosphere, a flask containing 1-bromo-2-chloro-3-fluorobenzene (10.2 g, 49 mmol, 1 eq.), 1OH3NP14(m) (23.8 g, 1 eq.), potassium carbonate (13.4 g, 2 eq.), and NMP (70 ml) was heated and stirred at 180 C. After completion of the reaction, the reaction liquid was cooled to room temperature, and NMP was distilled off under reduced pressure. Subsequently, water and toluene were added thereto, and the mixture was partitioned. Subsequently, purification was performed by silica gel column chromatography to obtain ?1Br2CL3Px (3NP14(m))?

The synthetic route of 1-Bromo-2-chloro-3-fluorobenzene has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Kwansei Gakuin Educational Foundation; JNC Corporation; HATAKEYAMA, Takuji; KONDO, Yasuhiro; NAKAMOTO, Keiichi; YANAI, Motoki; (190 pag.)US2018/94000; (2018); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Application of 1996-30-1, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 1996-30-1, name is 3-Bromo-4-fluorochlorobenzene, This compound has unique chemical properties. The synthetic route is as follows.

The title compound (150 mg, 12.7 %, off-white solid) was obtained from [4- [1- (5-] tributylstannanyl-isoxazol-3-yl)-ethyl]-piperazine-l-carboxylic acid ethyl ester (1.063 g, 1.98 mmol) and Pd (PPh3) [2C12] (19.2 mg) with [2-BROMO-4-CHLORO-1-FLUORO-BENZENE] (368mg, 1.76 mmol) in dioxane (lOmL) at 110 [C] overnight. 1H-NMR (CDC13) 8 (ppm): 7.94 (dd, 1H), 7.40 (m, 1H), 7.17 (dd, 1H), 6.71 (d, [1H),] 4.13 (q, 2H), 3.90 (q, 1H), 3.51 (m, 4H), 2.52 (m, 4H), 1.86 (d, 3H) and 1.26 (t, 3H).

The chemical industry reduces the impact on the environment during synthesis 3-Bromo-4-fluorochlorobenzene. I believe this compound will play a more active role in future production and life.

Reference:
Patent; ASTRAZENECA AB; NPS PHARMACEUTICALS, INC.; WO2004/14370; (2004); A2;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Some common heterocyclic compound, 6940-78-9, name is 1-Bromo-4-chlorobutane, molecular formula is C4H8BrCl, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Computed Properties of C4H8BrCl

Example (C):1Preparation of 7-(4-cMorobutoxy)-3,4-dihydro carbostyril (III):; The three necked flask was charged with 7-hydroxy-3, 4-dihydro carbostyril (II) (50gm, 0.306moles) in acetone: water mixture (400ml: 25ml). To this mixture was successively added potassium carbonate (50,8gm, 0,367moles), PEG-400 (61.2gm) and stirred at ambient temperature for one hour. The l-bromo-4-chlorobutane (157ml, 0.918moles) was added to mixture over a period of 10 min. Reaction mixture was then stirred at ambient temperature for 15-16 hours. The progress of the reaction was monitored by TLC (eluent: chloroform: methanol (90:10)). Reaction mixture was filtered and the inorganics were washed with acetone (100ml). The solvent was removed under the reduced pressure below 40 0C. The thick oily residue obtained was stirred with n-hexane (500ml) and water (500ml), at 10-15 0C, for a period of 45 min.The solid was filtered, washed with water (500ml) and then with n-hexane (500ml). The resulting solid was dried at 65-70 0C to obtain 7-(4-chlorobutoxy)-3, 4-dihydro carbostyril (III) (72.7gm, 94 %).1H (CDCl3): 1.9 (m, 4H), 2.5 (m, 2H), 2.8 (m, 2H), 3.6 (m, 2H), 3.9 (m, 2H), 6.3 (s, IH), 6.4 (d, IH), 7.0 (d, IH) and 9.3 (s, IH)

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 6940-78-9, its application will become more common.

Reference:
Patent; UNICHEM LABORATORIES LIMITED; WO2007/94009; (2007); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Electric Literature of 39065-95-7, A common heterocyclic compound, 39065-95-7, name is 4-(Chlorodifluoromethoxy)aniline, molecular formula is C7H6ClF2NO, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a mixture of 1,2-dimethyl-4-(pyrimidin-5-yl)-1H-benzo[d]imidazole-6-carboxylic acid (4d, 15 mg, 0.056 mmol, 1 eq) and HATU (25.51 mg, 0.067 mmol, 1.2 eq), DIPEA (14.45 mg, 0.112 mmol, 19.48 uL, 2 eq) in DMF (1 mL) at 20 C. was added 4-[chloro(difluoro)methoxy]aniline (1h, 16.24 mg, 0.084 mmol, 1.5 eq). The mixture was stirred at 20 C. for 16 hours. The mixture was concentrated in vacuo. LCMS showed desired MS. The mixture was poured into water and extracted with EtOAc, and the combined organic layers were dried over anhydrous Na2SO4, filtered and concentrated in vacuo to give the crude product. The residue was purified by prep-HPLC (TFA condition, column: Nano-Micro UniSil 5-100 C18 ULTRA 100*250 mm 5 um; mobile phase: [water (0.1%TFA)-ACN]; B %: 25%-50%, 11 min) to afford the title compound 4 as a white solid. MS mass calculated for [M+H]+ (C21H16ClF2N5O2) requires m/z 444.1, LCMS found m/z 444.1. 1H NMR (400 MHz, MeOD-d4) delta 9.33-9.25 (m, 3H), 8.48 (s, 1H), 8.25 (s, 1H), 7.88 (d, J=9.0 Hz, 2H), 7.33 (d, J=8.8 Hz, 2H), 4.07 (s, 3H), 2.85 (s, 3H).

The synthetic route of 39065-95-7 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Terns, Inc.; ROMERO, F. Anthony; KIRSCHBERG, Thorsten A.; HALCOMB, Randall; XU, Yingzi; (144 pag.)US2020/87283; (2020); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 2163-00-0, name is 1,6-Dichlorohexane belongs to chlorides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below. category: chlorides-buliding-blocks

A 250 mL four-necked flask equipped with a mechanical stirrer, a thermometer and a reflux condenser was used as the reaction vessel. 32. 3 g (0.13 mol) of sodium thiosulfate pentahydrate was weighed out, 70.0 g of water and 35. 0 g of DMF were added, After stirring and dissolving, 9.3 g (0.06 mol) of 1,6-dichlorohexane was added while stirring. The temperature of the solution was raised by heating, and the temperature of the reaction solution was raised to 90 C. The reaction was stirred at this temperature for 6 h, Hexamethylene-1,6-dithiosulfate disodium salt (HTS) solution. The resulting hexamethylene-1,6-dithio-sulfate disodium salt solution was analyzed by a gas chromatograph (GC) and a liquid chromatograph (HPLC), respectively, to measure 1,6-dichlorohexane and thiosulfate Sodium in the solution

The synthetic route of 2163-00-0 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Beijing Red Avenue Innova Co., Ltd; Zhen, Boming; Dong, Dong; Zhao, Lili; fang, Caiqin; Ruan, zhen Gang; Hu, Xiaona; (10 pag.)CN105218419; (2016); A;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Related Products of 64628-73-5, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 64628-73-5 name is 3-Chloro-4-(trifluoromethoxy)aniline, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

A) 3-(3-Chloro-4-trifluoromethoxy-phenylamino)-propionic acid tert-butyl ester A solution of 9.26 g (42.4 mmol) of 3-chloro-4-trifluoromethoxy-phenylamine and 4.39 ml (42.4 mmol) of 2,6-lutidine in 50 ml of toluene was treated slowly with 7.30 ml (42.4 mmol) of tert-butyl 3-bromopropionate and stirred 2 days at reflux temperature. The reaction was then partitioned between aqueous 10% KHSO4 and EtOAc (3*). The organic phases were washed with 10% NaCl, dried over Na2SO4 evaporated and purified by flash silica gel column (n-heptane:EtOAc 9:1) to yield 9.59 g (60%) of the title compound as brown liquid. MS: 339 (M+, Cl).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 3-Chloro-4-(trifluoromethoxy)aniline, and friends who are interested can also refer to it.

Reference:
Patent; Aebi, Johannes; Binggeli, Alfred; Green, Luke; Hartmann, Guido; Maerki, Hans P.; Mattei, Patrizio; US2011/92698; (2011); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 13918-92-8, name is 2,4-Difluorobenzene-1-sulfonyl chloride, belongs to chlorides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 13918-92-8, Computed Properties of C6H3ClF2O2S

General procedure: A mixture of norfloxacin (a) or ciprofloxacin (b) (1 mmol) (refPreviewPlaceHolderScheme 1) and K2CO3 (152 mg, 1.1 mmol) was stirred in acetone (20 mL) at room temperature for 20 min. To the resulted mixture, the appropriate arenesulfonyl chloride (1.2 mmol) in acetone (5 mL) was added dropwise over a period of 20 min. The reaction mixture was further stirred at room temperature for 24 h. The separated solid was then filtered, washed with cold water, dried and crystallized from the appropriate solvent.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 2,4-Difluorobenzene-1-sulfonyl chloride, and friends who are interested can also refer to it.

Reference:
Article; Abdel-Aziz, Alaa A.-M.; Asiri, Yousif A.; Al-Agamy, Mohamed H.M.; European Journal of Medicinal Chemistry; vol. 46; 11; (2011); p. 5487 – 5497;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Synthetic Route of 56961-77-4, These common heterocyclic compound, 56961-77-4, name is 1-Bromo-2,3-dichlorobenzene, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Intermediate 1:[0114] A well-dried flask was first charged with l-bromo-2,3-dichlorobenzene (4 g, 17.7 mmol) and 1,4-diazepane (2.1 g, 20.9 mmol), which was evacuated and backfilled with N2 through a balloon under gentle warming (40C). Toluene was charged and the mixture was bubbled with N2 for 10 min, then BINAP (318 mg, 0.51 mmol) and Pd2dba3 (156 mg, 0.17 mmol) was added to the mixture, followed by DBU (3.4 mL). The resulting mixture was warmed at 60- 70C while fine powder of tBuONa was added in one portion to start the amination. After the reaction mixture cooled to rt, (Boc)20 (11 g, 51 mmol) solution in DCM was added dropwise to the reaction mixture, then stirred for 3 h at rt. The reaction mixture was diluted with water and extracted with EtOAc. The combined EtOAc layers were washed with brine, dried over anhydrous Na2S04, concentrated in vacuo and purified by flash chromatography on silica gel column (elution with PE/EtOAc = 10:1) to give tert-butyl 4-(2,3-dichlorophenyl)-l,4-diazepane- 1-carboxylate (intermediate 1) (4.1 g, 70%) as a yellow oil.

Statistics shows that 1-Bromo-2,3-dichlorobenzene is playing an increasingly important role. we look forward to future research findings about 56961-77-4.

Reference:
Patent; THE UNIVERSITY OF NORTH CAROLINA AT CHAPEL HILL; JIN, Jian; ROTH, Bryan; FRYE, Stephen; WO2012/3418; (2012); A2;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics