A scalable method to fabricate high-performance biomimetic membranes for seawater desalination: Incorporating pillar[5]arene water nanochannels into the polyamide selective layer was written by Lim, Yu Jie;Lai, Gwo Sung;Zhao, Yali;Ma, Yunqiao;Torres, Jaume;Wang, Rong. And the article was included in Journal of Membrane Science in 2022.COA of Formula: C9H3Cl3O3 This article mentions the following:
In this work, we explored the practicability of a nanochannel-based biomimetic membrane (NBM) incorporating pillar[5]arene water channels for seawater reverse osmosis (SWRO) desalination. Two classes of peptide-attached biomimetic channels, (pR)-pillar[5]arenes (pRPH) and (pS)-pillar[5]arenes (pSPH) were integrated into the selective layer of SWRO membranes via interfacial polymerization on the top side of a polysulfone (PSf) support membrane. Here, pSPH is a non-identical stereoisomer of pRPH and was used as a neg. control to pRPH to elucidate the flux enhancement effect contributed by pRPH. The optimized NBM presented a water permeability of 2.52 L m-2 h-1 bar-1 and 99.5% rejection under SWRO testing conditions of 50 bar applied pressure and 32,000 mg/L NaCl as feed solution The 62% permeability increment with reference to the control membrane is hypothesized to originate from hybrid polyamide layers that were rougher with more voids (higher effective surface area and lower hydraulic resistance for water transport) as well as the conceivable water transport pathways provided by the pRPH channels. The simulation results from module-scale modeling suggest that the optimized NBM could lead to 7.2% savings in specific energy consumption of the membrane unit stage (or reduce the required membrane area by 25%) with respect to the com. SWC4-LD membrane. The performance of the optimized NBM was further assessed in a one-week desalination test using an actual seawater feed gathered from an SWRO plant in Singapore. The robust NBM exhibited stable performance and â?8% higher water flux (42 L m-2 h-1) than SWC4-LD with a comparable rejection of 99.3%, suggesting the feasibility of pillar[5]arene-based biomimetic membranes for seawater desalination. In the experiment, the researchers used many compounds, for example, Trimesoylchloride (cas: 4422-95-1COA of Formula: C9H3Cl3O3).
Trimesoylchloride (cas: 4422-95-1) belongs to organic chlorides. Organic chlorides are compounds containing a carbon-chlorine bond, which are widely used in the oil field as a wax dissolver. The haloform reaction, using chlorine and sodium hydroxide, is also able to generate alkyl halides from methyl ketones, and related compounds. Chloroform was formerly produced thus.COA of Formula: C9H3Cl3O3
Referemce:
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics