Preparation of polysulfone support for higher-performance reverse osmosis membranes was written by Takeuchi, Kenji;Cruz-Silva, Rodolfo;Fujishige, Masatsugu;Yanagisawa, Naomi;Kitazawa, Hidenori;Maeda, Jun;Endo, Morinobu. And the article was included in Journal of Environmental Chemical Engineering in 2022.Recommanded Product: Trimesoylchloride This article mentions the following:
We prepared a polysulfone (PSU) support by applying a coating of a PSU-N,N-dimethylformamide (DMF) solution on 91μm thick nonwoven and then set it in water (the phase inversion process). The prepared PSU-substrate sheet was 280 mm wide and 10 m long. We then investigated the effects of the preparation conditions (i.e., the concentration of the PSU-DMF solution and the coating thickness) on the water permeability of the resulting PSU support. The thickness of the PSU layer increased almost linearly with the increase in the coating thickness, and the water permeability decreased monotonically with the increase in the PSU layer’s thickness. A bubble point anal. revealed that the pore size dia. of the membranes was approx. 20-60 nm, depending on the PSU-DMF solution’s concentration Using these PSU membranes as the support, we prepared a reverse-osmosis (RO) membrane, the active layer of which consisted of aromatic polyamide (PA) that contained carbon nanotubes. The salt rejection rate 99.7% and water permeability at 0.56 L m-2 h-1 bar-1 were achieved at 5.5 MPa for a 3.2% NaCl solution with the RO membrane, the support of which was prepared from a 17.0% PSU-DMF solution In the experiment, the researchers used many compounds, for example, Trimesoylchloride (cas: 4422-95-1Recommanded Product: Trimesoylchloride).
Trimesoylchloride (cas: 4422-95-1) belongs to organic chlorides. Chlorination modifies the physical properties of hydrocarbons in several ways. These compounds are typically denser than water due to the higher atomic weight of chlorine versus hydrogen. Organochlorine compounds are lipophylic, meaning they are more soluble in fat than in water. This gives them a high tenancy to accumulate in the food chain (biomagnification).Recommanded Product: Trimesoylchloride
Referemce:
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics