Application of hydrophobic deep eutectic solvent for the extraction of aromatic compounds from contaminated water was written by Yakubu, Abdullahi;Gano, Zaharaddeen Sani;Ahmed, Omar Umar;Shuwa, Suleiman Mohammed;Atta, Abdulazeez Yusuf;Jibril, Baba Yakubu. And the article was included in Korean Journal of Chemical Engineering in 2022.Recommanded Product: N-Methyl-N,N-dioctyloctan-1-aminium chloride The following contents are mentioned in the article:
Hydrophobic deep eutectic solvent (DES) was synthesized from TBAB and decanoic acid and used to study the extraction of aromatic hydrocarbon from contaminated water samples. DES was screened by selecting different ratios between the TBAB and decanoic acid. A ratio of 1: 2 was observed to be the best among others and was used for the desired application. Within the temperature range of 25-70°C, physicochem. properties such as d. (944-915 kg/m3), viscosity (1,636-179 mPa·s), conductivity (141-1,007μS/cm), and pH (3.14-2.73) of the synthesized DES were determined For the extraction study, benzene, toluene, and xylene (BTX)-doped water were used as a simulated contaminated water. Response surface methodol. was employed in modeling and optimizing the effects of temperature, time, and solvent mass fraction on the extraction efficiency of the DES. Extraction efficiency of 68.1%, 70.84% and 77.73% for BTX, resp., was recorded at optimum values of 25°C, 60 min and 0.6 (solvent mass fraction). Extraction efficiency as high as 86.61%, 88.94%, and 92.71% for BTX, resp., can be obtained within the design space. Effective regeneration and reuse of the DES after each extraction was carried out for five consecutive cycles; their results showed no significant decrease in their resp. extraction efficiencies and recovery of the DES. This, therefore, improves the overall performance of hydrophobic DES for the extraction process. This study involved multiple reactions and reactants, such as N-Methyl-N,N-dioctyloctan-1-aminium chloride (cas: 5137-55-3Recommanded Product: N-Methyl-N,N-dioctyloctan-1-aminium chloride).
N-Methyl-N,N-dioctyloctan-1-aminium chloride (cas: 5137-55-3) belongs to organic chlorides. Chlorination modifies the physical properties of hydrocarbons in several ways. These compounds are typically denser than water due to the higher atomic weight of chlorine versus hydrogen. Aliphatic organochlorides are often alkylating agents as chlorine can act as a leaving group, which can result in cellular damage.Recommanded Product: N-Methyl-N,N-dioctyloctan-1-aminium chloride
Referemce:
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics