Month: September 2021

2533-69-9, name is Methyl 2,2,2-trichloroacetimidate, belongs to chlorides-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Safety of Methyl 2,2,2-trichloroacetimidate

A round-bottom 3 neck flask was charged with 3,4-diaminobenzenesulfonic acid (8.0 g, 42.5 mmol) and anhydrous MeOH (0.85 L). O-Methyl-1,1,1-trichloroacetimidat was added (2.8 mL, 3.74 g, 21.2 mmol). The resultant suspension was stirred for 24 h at ambient conditions. Additional amount of O-methyl-1,1,1-trichloroacetimidat was added (1.4 mL, 1.87 g, 10.5 mmol) after this time, then reaction mixture was stirred for 72 h days at ambient conditions, heated for 3 h at 50 C. and triethylamine (14 mL, 9.4 g, 93.5 mmol) was added. Stirring was continued at this temperature for 18 h. Then reaction mixture was cooled to 30 C., and an intensive flow of dry HCl was passed through the solution until a precipitate formed. The suspension was filtered off at 40 C., precipitate was washed with MeOH (4×150 mL, stirring of suspension for 10-15 min each turn) and with MeOH-HCl 3.5% solution (100 mL, 1 h of stirring). Product 1H,1’H-2,2′-bibenzimidazole-5,5′-disulfonic acid was pale yellow or colorless, weight 3.5 g, yield 42%. It may contain own hydrochloride as a salt. NMR1 H spectrum (Brucker Avance 300 instrument; solvent d6-dimethyl sulfoxide; delta, ppm; J, Hz): 5.27 br.s (-SO3H in exchange with H2O and NH) 7.73 m (2Ha,2Hb), 8.01 br.s (2Hx). NMR 13C{1H} spectrum (Brucker Avance 300 instrument; solvent d6-dimethyl sulfoxide; delta, ppm): 113.00, 115.41, 123.27, 136.44, 137.60, 142.24, 145.34.

The synthetic route of 2533-69-9 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; CRYSOPTIX KK; US2010/279122; (2010); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 20850-43-5 as follows. Recommanded Product: 20850-43-5

General procedure: Suspension of the appropriate 3-amino-1,1-dioxo-1,4,2-benzodithiazine derivative 4a-h (0.5 mmol), anhydrous K2CO3 (1.5 mmol, 0.21 g) and the appropriate alkyl chloride (0.6 mmol) in dry THF (5 ml) was heated at reflux for 20-24 h, then cooled in ice-bath and filtered off. The crude product was suspended in 5 ml of water, heated gently to ca. 50 C; and cooled with vigorous stirring until granular precipitate appeared. Filtering off and washing with cold water and diluted EtOH gave pure potassium salts. 4.5.11 ;N-{2-[(1,3-Benzodioxol-5-yl)methylthio]-4-chloro-5-(3-phenyl-1,2,4-oxadiazol-5-yl)benzenesulfonyl}cyanamide potassium salt (5o) ;Starting from 4g (0.196 g) and 1,3-benzodioxol-5-ylmethyl chloride (0.102 g). Yield: 0.215 g (88%): m.p. 274-276 C; IR (KBr): nu 2923, 2179, 1625, 1585, 1560, 1500, 1488, 1362, 1349, 1253, 1226, 1143 cm-1; 1H NMR (500 MHz, DMSO-d6): delta 4.38 (s, 2H, SCH2), 6,01 (s, 2H, OCH2O), 6.90 (d, J = 7.81 Hz, 1H, Ar), 6.98 (d, J = 7.81 Hz, 1H, Ar), 7.05 (s, 1H, Ar), 7.59-7.63 (m, 3H, Ar), 7.70 (s, 1H, Ar), 8.10-8.11 (m, 2H, Ar), 8.59 (s, 1H, Ar); Anal. C23H14ClKN4O5S2 (C, H, N).

According to the analysis of related databases, 20850-43-5, the application of this compound in the production field has become more and more popular.

Reference:
Article; Brozewicz, Kamil; Slawinski, Jaroslaw; European Journal of Medicinal Chemistry; vol. 55; (2012); p. 384 – 394;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

1996-29-8, These common heterocyclic compound, 1996-29-8, name is 1-Bromo-4-chloro-2-fluorobenzene, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Reference Example-10 A solution of 1-bromo-4-chloro-2-fluoro benzene (10.0 g, 47.8 mmol) in THF was added dropwise to a suspension of magnesium (1.28 g, 52.5 mmol) in THF (50 mL) at 40 C. (oil bath temperature) in the presence of a catalytic amount of iodine in an argon gas atmosphere, whereby a Grignard reagent was prepared. The Grignard reagent was added dropwise to a solution of diethyl oxalate (8.37 g, 57.3 mmol) in THF at -50 C., and the temperature was slowly raised to room temperature, followed by stirring for 18 hours. After the reaction was completed, the reaction solution was poured into ice, then, acidified with concentrated hydrochloric acid, and the resultant product was extracted with ether (100 mL*2, 50 mL*1). The organic layer was dried over anhydrous magnesium sulfate, and concentrated under reduced pressure, whereby an orange oily crude product (12.9 g) was obtained. This was purified by silica gel column chromatography (hexane:ethyl acetate=10:1), whereby ethyl 2-(4-chloro-2-fluorophenyl)-2-oxoacetate (4.17 g, yield: 41%) was obtained as a yellow oily material. 1H-NMR (400 MHz, CDCl3): delta1.40 (t, J=7.1 Hz, 3H), 4.43 (q, J=7.1 Hz, 2H), 7.22 (dd, J=1.8 and 10.2 Hz, 1H), 7.31 (dd, J=1.8 and 8.4 Hz, 1H), 7.89 (dd, J=7.6 and 8.4 Hz, 1H). 19F-NMR (376 MHz, CDCl3): delta-109 (s, 1F).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 1996-29-8.

Reference:
Patent; KAKEN PHARMACEUTICAL CO., LTD.; SAGAMI CHEMICAL RESEARCH INSTITUTE; KOBAYASHI, Osamu; NIIKURA, Naoko; INOUE, Tomoko; MIZUTA, Satoshi; TAKATSUNA, Reiko; HIRAI, Kenji; SHIROUZU, Kentaro; OBATA, Miyoo; (183 pag.)US2016/24110; (2016); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Electric Literature of 4584-46-7, The chemical industry reduces the impact on the environment during synthesis 4584-46-7, name is 2-Chloro-N,N-dimethylethanamine hydrochloride, I believe this compound will play a more active role in future production and life.

Solution of 2-(dimethylamino)ethyl chloride in heptane. To 2-(dimethylamino)ethyl chloride hydrochloride (10 g, 100 mmol) was added water (12 mL) and heptane (10 g). The mixture was stirred, and the pH of the aqueous phase was cautiously adjusted to pH 10 using a concentrated solution of sodium hydroxide, and the mixture was stirred for 45 min. The organic phase was separated, and the aqueous phase was extracted with further heptane (2.5 g). The combined organic phases were washed with water (5 mL) and then dried over anhydrous potassium carbonate for 15 min before filtering. This solution was used directly in the following step. Analysis by MR indicated that the concentration of 2- (dimethylamino)ethyl chloride was approximately 25 % w/w in heptane.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-Chloro-N,N-dimethylethanamine hydrochloride, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; H. LUNDBECK A/S; BØGESØ, Klaus, Peter; JUHL, Karsten; ZHONG, Huailing; LØLAND, Claus, Juul; WO2013/110313; (2013); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 155535-20-9, name is 2-Chloro-5,6,7,8-tetrahydroquinoxaline, This compound has unique chemical properties. The synthetic route is as follows., SDS of cas: 155535-20-9

b) A mixture of intermediate (3), 1-bromo-2,5-pyrolidinedione (0.116 mol) and dibenzoyl peroxide (1.3g) in tetrachloromethane (400ml) was stirred and refluxed for 35 minutes, brought to room temperature and then filtered. The reaction was carried out again using the same quantities. The residues were combined. The solvent was evaporated. The residue (60g) was purified by column chromatography over silica gel (eluent: cyclohexane/EtOAc 85/5; 15-35 mum). Two pure fractions were collected and their solvents were evaporated, yielding 25 g (43%) of (+/-)-5-bromo-2-chloro-5,6,7,8-tetrahydroquinoxaline (interm. 4) and 12 g (21 %) of (+/-)-8-bromo-2-chloro-5,6,7,8-tetrahydroquinoxaline.

According to the analysis of related databases, 155535-20-9, the application of this compound in the production field has become more and more popular.

Reference:
Patent; JANSSEN PHARMACEUTICA N.V.; EP1196410; (2004); B1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Reference of 7781-10-4, These common heterocyclic compound, 7781-10-4, name is 4-Chloro-7-methyl-7H-pyrrolo[2,3-d]pyrimidine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a mixture of (S)-tert-butyl 2-amino-4-(((S)-2-fluoro-3-methoxypropyl) (4-(5,6,7,8-tetrahydro-1,8-naphthyridin-2-yl) butyl)amino) butanoate (150 mg, 331 mumol), 4-chloro-7-methyl-7H-pyrrolo[2,3-d]pyrimidine (48 mg, 286) in t-AmOH (3 mL) was added 2.0M t-BuONa in THF (286 muL, 572 mumol) then t-BuXPhos-Pd-G3 (23 mg, 29 mumol) and the resulting mixture was heated to 100 C. for 15 h, cooled to rt, and then concentrated in vacuo to give a tert-butyl (S)-4-(((S)-2-fluoro-3-methoxypropyl) (4-(5,6,7,8-tetrahydro-1,8-naphthyridin-2-yl) butyl)amino)-2-((7-methyl-7H-pyrrolo[2,3-d]pyrimidin-4-yl) amino) butanoate intermediate, LCMS (ESI+): m/z=584.4 (M+H)+, which was used without further purification. Of the butanoate intermediate, 80 mg, 141 mumol) was taken up in DCM (1 mL) and TFA (400 juL) and the resulting mixture was stirred at rt for 6 h and then concentrated in vacuo. The crude residue was purified by reverse phase prep-HPLC to give the title compound. LCMS (ESI+): m/z=528.3 (M+H)+.

Statistics shows that 4-Chloro-7-methyl-7H-pyrrolo[2,3-d]pyrimidine is playing an increasingly important role. we look forward to future research findings about 7781-10-4.

Reference:
Patent; Pliant Therapeutics, Inc.; CHA, Jacob; DONG, Chengguo; HOM, Timothy; JIANG, Lan; LEFTHERIS, Katerina; LI, Hui; MORGANS, JR., David J.; MUNOZ, Manuel; REILLY, Maureen; ZHENG, Yajun; (232 pag.)US2019/276449; (2019); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Reference of 1127-85-1, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 1127-85-1, name is 2,4-Dichloro-5,6,7,8-tetrahydroquinazoline belongs to chlorides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

General procedure: To a solution of 2,4-dichloro-5-fluoroquinazoline (22a) (100.00mg, 460.77 mumol, 1.00 eq) in THF (3.00mL) was added methyl (2S,3S)-3-aminobicyclo[2.2.2]octane-2-carboxylate (84.44mg, 460.77 mumol, 1.00 eq) and DIPEA (238.20mg, 1.84mmol, 4.00 eq) at room temperature overnight. H2O (20mL) was added to the mixture and extracted with EtOAc (10mL×3). The combined organic layers were dried over Na2SO4 and concentrated in vacuum. The residue was purified by column chromatography on silica gel with PE:EtOAc (10:1 to 5:1) to give compound 23a (130.00mg, 357.33 mumol, 77.55% yield) as a yellow solid.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2,4-Dichloro-5,6,7,8-tetrahydroquinazoline, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Xiong, Jian; Wang, Jingjing; Hu, Guoping; Zhao, Weili; Li, Jianqi; European Journal of Medicinal Chemistry; vol. 162; (2019); p. 249 – 265;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 344-19-4, name is 2,6-Dichloro-4-fluoroaniline, This compound has unique chemical properties. The synthetic route is as follows., SDS of cas: 344-19-4

Step 1: (2,6-dichloro-4-fluorophenyl)hydrazine hydrochloride To a – 5 C solution (internal temperature, wet ice/acetone bath) of 2,6-dichloro-4-fluoroaniline (3.0 g, 17 mmol) in 37 % hydrochloric acid (30 mL) and trifluoroacetic acid (20 mL) was added dropwise an aqueous solution of sodium nitrite (1.4 g, 20 mmol, 6 mL water). The reaction was stirred for 90 minutes, then a solution of stannous chloride dihydrate (5.6 g, 25 mmol) in 37 % hydrochloric acid (16 mL) was added over 15 minutes, keeping the internal temperature ? 2 C. The mixture was stirred overnight at room temperature. The mixture was filtered and the collected solid was washed with isopropyl alcohol and dried under house vacuum to provide the title compound. LCMS-ESI+ (m/z): [M+H]+ calcd for C6H6Cl2FN2: 195.0; found: 194.9.

According to the analysis of related databases, 344-19-4, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Gilead Sciences, Inc.; BLOMGREN, Peter A; CURRIE, Kevin S; GEGE, Christian; KROPF, Jeffrey E; XU, Jianjun; (60 pag.)EP3257847; (2017); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Related Products of 93-50-5,Some common heterocyclic compound, 93-50-5, name is 4-Chloro-2-methoxyaniline, molecular formula is C7H8ClNO, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A solution of 4-chloro-2-methoxyaniline (4.93 g, 31.3 mmol) in THF (70 ml) was treated with BOC-anhydride (11.00 ml, 47.4 mmol) and heated at 70 overnight. LCMS showed that most of starting materials were converted to product. The solution was treated with silica gel and evaporated under reduced pressure. The material was divided into two batches, each of which was chromatographed by Biotage MPLC (50 g silica gel column, 0 to 1% EtOAc in hexanes). Like fractions from the two columns were combined and evaporated under reduced pressure to provide a clear colorless liquid. Heptane (-80 mL) was added, then evaporated under reduced pressure to provide a clear, very viscous liquid. LCMS and NMR are consistent with tert-butyl 4-chloro-2-methoxyphenylcarbamate (7.66 g, 29.7 mmol, 95 % yield). 1H NMR (300 MHz, CHLOROFORM-d): delta ppm 8.08-7.96 (m, 1 H), 7.01 (br s, 1 H), 6.92 (dd, J=8.65, 2.20 Hz, 1 H), 6.83 (d, J=2.34 Hz, 1 H), 3.87 (s, 3 H), 1.53 (s, 9 H). LCMS: m/z 202 (loss of t-Bu).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 4-Chloro-2-methoxyaniline, its application will become more common.

Reference:
Patent; FORMA THERAPEUTICS, INC.; ASHWELL, Susan; CAMPBELL, Ann-Marie; CARAVELLA, Justin Andrew; DIEBOLD, R. Bruce; ERICSSON, Anna; GUSTAFSON, Gary; LANCIA, David R.; LIN, Jian; LU, Wei; WANG, Zhongguo; (141 pag.)WO2016/44782; (2016); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 14495-51-3, name is 2-Bromo-5-chlorotoluene, belongs to chlorides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 14495-51-3, Recommanded Product: 2-Bromo-5-chlorotoluene

13.3 ml (0.1 mol) of 2-bromo-5-chlorotoluene was dissolved in 200 ml of anhydrous THF, and 27.7 ml (0.12 mol) of triisopropyl borate was added thereto. After cooling the reaction mixture to-78C over a dry ice-acetone bath, 48 ml (0.12 mol) of 2.5 M n-BuLi (in hexane) was added dropwise thereto for 1 hour, the dry ice-acetone bath was removed, and 150 ml of 3 N HCI was added thereto. The resulting mixture was stirred for 1 hour, and the separated water layer was extracted twice with 100 ml portions of ethyl acetate. The organic layers were combined, washed with a brine solution, dried over anhydrous MgS04, and filtered under a reduced pressure to remove the solvent. The residue was recrystallized from 10% ethyacetate/hexane to obtain 13.8 g (yield 81%) of 4-chloro-2-methylboronic acid as a white solid. ¹H NMR (300 MHz, CDCh) d 8.07 (dd, 1H, J= 5.7 Hz, 2.8 Hz), 7.28-7.26 (m, 2H), 2.76 (s, 3H)

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; KOREA RESEARCH INSTITUTE OF CHEMICAL TECHNOLOGY; OSCOTEC INC.; WO2005/123054; (2005); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics