Month: June 2021

Related Products of 626-43-7,Some common heterocyclic compound, 626-43-7, name is 3,5-Dichloroaniline, molecular formula is C6H5Cl2N, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: In an open-capped cylindrical pyrex-glass (50mL), was added a mixture of an appropriate 2-bromobenzaldehyde (10mmol), proper primary amine (12mmol), TBAA (15mmol), and CDSCS (0.3g, 0.05mol%) in DMSO (10mL) and the mixture was kept at room temperature and irradiated at 60W power (cup horn: 20kHz) in ultrasonic apparatus. The progress of the reaction was monitored by TLC. After completion of the reaction (Table 5), then the reaction mixture was filtered to separate the catalyst and catalyst was washed with EtOAc (3×50mL). The filtrate was then mixed with water (100mL). The separated organic layer was washed with water (2×100mL). Afterward, the organic layer was dried over anhydrous Na2SO4 and evaporated. The crude product was then purified by column chromatography on silica gel eluting with a mixture of n-hexane/EtOAc. 2.2.1 2-Phenyl-2H-indazole (3a) White solid; yield: 1.79g (92%); mp 81-82C; IR (KBr): 3100, 2945, 1652, 1567, 1470cm-1; 1H NMR (250MHz, CDCl3): delta=7.16 (t, 1H, J=7.8Hz), 7.39 (t, 1H, J=7.8Hz), 7.48-7.51 (m, 3H), 7.73 (d, 1H, J=8.5Hz), 7.81-7.86 (m, 2H), 7.97 (d, 1H, J=8.5Hz), 8.46 (s, 1H); 13C NMR (250MHz, CDCl3): delta=118.78, 120.84, 121.07, 121.79, 122.90, 123.34, 127.41, 128.77, 130.12, 141.86, 150.26; MS (EI): m/z (%)=194 (15.7) [M+]; Anal. Calcd for C13H10N2: C, 80.39; H, 5.19; N, 14.42. Found: C, 80.30; H, 5.12; N, 14.49.

The synthetic route of 626-43-7 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Soltani Rad, Mohammad Navid; Ultrasonics Sonochemistry; vol. 34; (2017); p. 865 – 872;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 108-37-2, name is 1-Bromo-3-chlorobenzene, A new synthetic method of this compound is introduced below., Formula: C6H4BrCl

General procedure: General procedure: a 50 mL ask equipped with a magnetic stir bar was charged with aryboronic acid (1 mmol, 1 equiv), aromatic halides (1.2 mmol, 1.2 equiv), catalyst (2 mol%), base (2 mmol, 2 equiv), DMF (5 mL) solution under CO (1 atm) atmosphere, along with sealed the reaction flask by a rubber stopper and CO was injected into it with a stainless steel gas flowmeter. The mixture was then stirred at 120 C forthe indicated time (SI, Fig. S1). After being allowed to cool to roomtemperature, the reaction mixture was diluted with 5 mL water and extracted with diethyl ether (3 × 5 mL). The organic phases werecombined, and the volatile components were evaporated in a rotaryevaporator. The residue was puried by column chromatography onsilica gel.

The synthetic route of 108-37-2 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Wang, Zheng-Jun; Wang, Xue-Yan; Wang, Xia; Liang, Zhi-Wu; Xu, Xinhua; Catalysis Communications; vol. 101; (2017); p. 10 – 14;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Synthetic Route of 61881-19-4, The chemical industry reduces the impact on the environment during synthesis 61881-19-4, name is 2,2,2-Trifluoro-N-phenylacetimidoyl chloride, I believe this compound will play a more active role in future production and life.

General procedure: Add sodium acetate, trifluoroethylimidyl chloride (II), hydrazone (III), and 1 mL of organic solvent to the 35 mL Schlenk tube according to the raw material ratio in Table 1.Mix and stir well. After the reaction is completed according to the reaction conditions in Table 2, 2-4 hours,Add elemental iodine, continue the reaction for 1-2 hours, filter, and stir the sample in silica gel.After purification by column chromatography, the corresponding 5-trifluoromethyl-substituted 1,2,4-triazole compound (I) is obtained. The reaction process is shown by the following formula:

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2,2,2-Trifluoro-N-phenylacetimidoyl chloride, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Zhejiang Sci-Tech University; Chen Zhengkai; Hu Sipei; Yang Zuguang; (10 pag.)CN110467579; (2019); A;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Application of 2162-98-3,Some common heterocyclic compound, 2162-98-3, name is 1,10-Dichlorodecane, molecular formula is C10H20Cl2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Example 8 20.6 g (0.1 mol) of 4-octylaminopyridine, 10.5 g (0.05 mol) of 1,10-dichlorodecane and 30 ml of white spirit (boiling point 155 to 200 C.) were combined and heated to 130 C. The exothermic reaction causes the temperature to increase to 155 C., and at the same time white crystal precipitate out. The reaction mixture was stirred for a further 4 hours at 140 C., and after cooling to room temperature the very fine crystal sludge was filtered over a filterpaper and washed with petroleum ether, giving a beige, solid mass. The reaction product octenidine dihydrochloride in this example is very difficult to filter off with suction since it is produced in very fine form.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 1,10-Dichlorodecane, its application will become more common.

Reference:
Patent; AIR LIQUIDE SANTE (INTERNATIONAL); US2001/16660; (2001); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Application of 102-49-8,Some common heterocyclic compound, 102-49-8, name is 3,4-Dichlorobenzylamine, molecular formula is C7H7Cl2N, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: To a stirred solution of tosylate 1 (100 mg, 0.29 mmol) in Acetone or CHCl3 (3 mL) was slowly added amine 2 (0.58 mmol) and ketone 3 (0.87 mmol). Then p-TsOH (25 mg, 0.145 mmol)was addedto the reaction mixture. The resultant mixture was stirred at 60 C for 24 h until the reaction was completed as indicated by TLC. The reaction mixture was concentrated in vacuo, and then extracted with saturated aqueous NaHCO3 and CH2Cl2. The organic layer was dried over Na2SO4 and concentrated under reduced pressure. The residue was purified by column chromatography on silica gel to give 4 or 5 as syrups.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 3,4-Dichlorobenzylamine, its application will become more common.

Reference:
Article; Yuan, Wen; Xia, Jianhui; Zhang, Xiaoke; Liang, Peng; Zhang, Jichao; Jiao, Wei; Shao, Huawu; Tetrahedron; vol. 72; 27-28; (2016); p. 3994 – 4000;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Electric Literature of 202197-26-0, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 202197-26-0 name is 3-Chloro-4-((3-fluorobenzyl)oxy)aniline, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

Roschangar et al. ,Use of lithium N,O-dimethylhydroxylamide as an efficient in situ protecting agent for aromatic aldehydes. Tertrahedron 2002, 58, 1657-1666). Preparation analogous (Nishino et al.; Process for producing 4-aminoquinazoline compound by chlorination of quinazolin-4-one or its derivative and animation. 2003) as follows: To a mixture of 6-iodo-lH-quinazolin-4-one (10) (6.8Og; 25.0 mmol), toluene (5.0 mL) and POCl3 (27.5 mmol; 2.60 mL) carefully triethylamine (27.5 mmol; 3.81 mL) was added. The mixture was heated to 80 0C for 2 h, cooled to room temperature, a solution of 3-chloro~4-(3- fluorobenzyloxy)phenylamine (15) (27.50 mmol; 6.92 g) in 2~butanone (20.0 mL) added and the mixture stirred at 80 0C for another hour. The mixture was cooled to 00C, the yellow precipitate was filtered off and added to a NaOH solution (IN; 150 mL) by stirring. After 30 min the yellow solid was filtered off, washed with water and a small amount of acetone and dried in vacuo. Yield (8.38 g; 66%) analytical pure sample. 1H-NMR (DMSO-[D6]): delta (ppm) = 5.26 (s, 2H), 7.15-7.22 (m, IH), 7.27 (d, IH, J = 9.1 Hz), 7.29-7.35 (m, 2H), 7.43-7.51 (m, IH), 7.56 (d, IH, J = 8.8 Hz), 7.74 (dd, IH, J = 9.1 Hz, 4J = 2.5 Hz), 8.02 (d, IH5 4J = 2.5 Hz), 8.12 (dd; IH, J = 8.8 Hz, 4J = 1.7 Hz)5 8.62 (s, IH), 8.96 (d, 4J = 1.7 Hz), 9.90 (s, IH, exchangeable).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 3-Chloro-4-((3-fluorobenzyl)oxy)aniline, and friends who are interested can also refer to it.

Reference:
Patent; 4SC AG; WO2009/63054; (2009); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Related Products of 57946-56-2,Some common heterocyclic compound, 57946-56-2, name is 4-Chloro-2-fluoroaniline, molecular formula is C6H5ClFN, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A solution of 4-chloro-6-hydroxy-7-methoxyquinoline (3.0 g, 14 mmol) and 4-chloro-2-fluoroaniline (3.5 g, 23 mmol) in cyclohexanol (100 ml) containing 1M ethereal hydrogen chloride (16 ml) was heated at 155 C. for 18 hours.. After cooling the mixture was diluted with ether and isohexanes and the precipitate was collected by filtration.. The crude product was dissolved in a mixture of methylene chloride/methanol/ammonia (100/10/1) and silica (10 g) was added.. The solvent was removed by evaporation and the resulting powder was purified by flash chromatography eluding with methylene chloride/methanol/ammonia (95/5/1 increasing to 80/20/1) to give 4-(4-chloro-2-fluoroanilino)-6-hydroxy-7-methoxyquinoline (1.12 g, 25%). 1H NMR Spectrum: (DMSOd6) 3.95 (s, 3H); 6.30 (m, 1H); 7.25 (s, 1H);7.35 (m, 2H); 7.55 (m, 2H); 8.20 (d, 1H); MS (ESI): 319 [MH]+.

The synthetic route of 57946-56-2 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Zeneca Limited; Zeneca Pharma S.A.; US6809097; (2004); B1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Synthetic Route of 7006-52-2, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 7006-52-2, name is N-Methyl-3-chloroaniline belongs to chlorides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

General procedure: In air, K2HPO4 (10 mol percent, 4.35mg), PMHS (242 mul), amine (0.25 mmol), formic acid (4.6equiv ,43.3mul), 18-crown-6 (20mol percent, 13.2mg) 4A MS(10mg) and 2 ml THF were added into a tube equipped with a water condenser. The reaction mixturewas stirred at 80C for 12 hours. The yields of isolated products were reported. The mixture was filtered through a silica gelcolumn with petroleum ether and ethyl acetate as the eluent. The resultant solution was concentrated and purified by silica gelcolumn chromatography to give the corresponding product.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, N-Methyl-3-chloroaniline, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Huang, Yan; Deng, Wei; Lin, Bo-Lin; Chinese Chemical Letters; (2019);,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 60811-21-4, name is 4-Bromo-2-chloro-1-fluorobenzene, A new synthetic method of this compound is introduced below., Recommanded Product: 4-Bromo-2-chloro-1-fluorobenzene

To a mixture of magnesium (434 mg) and THF (2 mL) was added a slight amount of iodine under an argonatmosphere. The mixture was allowed to warm to 60C. To the mixture was added dropwise a solution of 4-bromo-2-chloro-1-fluorobenzene (3.58 g) in THF (6.5 mL) while keeping the temperature at 65C. The mixture was stirred at 60Cfor 30 minutes, and then allowed to cool to room temperature to give (3-chloro-4-fluorophenyl)magnesium bromide. Toa solution of (R)-1-(tert-butoxycarbonyl)-5-oxopyrrolidine-2-carboxylic acid ethyl (2.00 g) in THF (25 mL) was added theobtained (3-chloro-4-fluorophenyl)magnesium bromide under an argon atmosphere at -40C. The mixture was stirredat -40C for 1 hour. To the reaction mixture were added a saturated aqueous solution of ammonium chloride (20 mL)and water (10 mL). The mixture was stirred at room temperature for 2 hours, and then to the mixture were added ethylacetate and water. The organic layer was separated. The organic layer was dried over anhydrous sodium sulfate, andconcentrated under reduced pressure. The residue was purified by column chromatography on silica gel (eluent: nhexane/ethyl acetate=90/10-60/40) to give the title compound (2.79 g).

The synthetic route of 60811-21-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Kissei Pharmaceutical Co., Ltd.; KONDO, Atsushi; MORITA, Naohide; ISHIKAWA, Takehiro; YOSHIDA, Masako; MORIYAMA, Akihiro; WANAJO, Isao; (158 pag.)EP3459941; (2019); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 13918-92-8, name is 2,4-Difluorobenzene-1-sulfonyl chloride, A new synthetic method of this compound is introduced below., Computed Properties of C6H3ClF2O2S

A mixture of 1.80 g (8.8 mmol) C-5, 2.29 mL (17 mmol) 2,4-difluorobenzenesulphonyl chloride, 1.07 mL (13.3 mmol) pyridine and 20 mL DCM is stirred at RT over night. 100 mL DCM is added and the reaction mixture is extracted three times with 50 mL aqueous 1M HCl. The organic layer is dried over MgSO4 and the solvent is removed under reduced pressure. The solid is dissolved in water/MeCN and further purified by RP-chromatograpy. Yield: 2.9 g (86%).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; BOEHRINGER INGELHEIM INTERNATIONAL GMBH; The designation of the inventor has not yet been filed; EP2546249; (2013); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics