Month: June 2021

Some common heterocyclic compound, 918538-05-3, name is 2,4-Dichloropyrrolo[2,1-f][1,2,4]triazine, molecular formula is C6H3Cl2N3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. category: chlorides-buliding-blocks

To stirred solution of pyridin-4-ylmethanamine (0.086 g, 0.798 mmol) in dioxane (5 mL) was dropwise added DIPEA (0.279 mL, 1.596 mmol) and stirred for 15 mm at room temperature. To the resulting reaction mixture was added 2,4-dichloropyrrolo[2,1- J][1,2,4]triazine (0.15 g, 0.798 mmol) stirred at room temperature for 1 h. The reactionwas monitored by LC-MS. The reaction mixture was concentrated under reduced pressure. To the residue was added water (50 mL) and extracted with ethyl acetate (3×80 mL). The combined organic phase was dried over anhydrous sodium sulfate filteredevaporated. The resulting crude product was purified by silica gel flash chromatography (ethyl acetate/petroleum ether) to get 2-chloro-N-(pyridin-4-ylmethyl)pyrrolo[2, 1-J][1,2,4]triazin-4-amine (0.14 g, 0.5 18 mmol, 64.9 % yield) as a brown solid. LCMS260.0 (M+H); rt 1.8 mm; Conditions E. ?HNMR: (300 MHz, DMSO-d6) oe 9.37-9.28 (m, 1H), 8.58-8.48 (m, 2H), 7.70 (dd, J2.6, 1.5 Hz, 1H), 7.38-7.30 (m, 2H), 7.03 (dd, J4.5, 1.5 Hz, 1H), 6.67 (dd, J4.2, 2.6 Hz, 1H), 4.75 (d, J6.0 Hz, 2H).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 918538-05-3, its application will become more common.

Reference:
Patent; BRISTOL-MYERS SQUIBB COMPANY; HARIKRISHNAN, Lalgudi S.; FINK, Brian E.; BORZILLERI, Robert M.; TONUKUNURU, Gopikishan; RAHAMAN, Hasibur; WARRIER, Jayakumar Sankara; SESHADRI, Balaji; (411 pag.)WO2017/15425; (2017); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

These common heterocyclic compound, 67952-93-6, name is 3-Chloro-4-methylbenzylamine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. HPLC of Formula: C8H10ClN

General procedure: A mixture of 2-amino-3-nitrobenzoic acid (5.0 mmol), EDCI (6.0 mmol),and HOBt (0.6 mmol) in DCM (30 mL) was stirred at room temperature for 5 mins. Then, amines (6.0 mmol) were added and the reaction was stirred at room temperature overnight. After completion, the mixture was diluted with DCM, washed with water twice, dried over anhydrous Na2SO4, evaporated, and chromatographed (EtOAc – petroleum ether) to afford the compounds 2a-k.

The synthetic route of 3-Chloro-4-methylbenzylamine has been constantly updated, and we look forward to future research findings.

Reference:
Article; Chen, Yinbo; Le, Vanminh; Xu, Xiaoyong; Shao, Xusheng; Liu, Jianwen; Li, Zhong; Bioorganic and Medicinal Chemistry Letters; vol. 24; 16; (2014); p. 3948 – 3951;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Electric Literature of 53145-38-3, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 53145-38-3, name is 2-Chloro-6-fluoroanisole belongs to chlorides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

100ml three-neck eggplant flask fully dried2- (4,4,5,5-tetramethyl-1,3,2-dioxabolan-2-yl) aniline (manufactured by Tokyo Chemical Industry Co., Ltd.) (with condenser, three-way cock and magnetic stir bar)2.41 g (11 mmol),1.61 g (10 mmol) of 2-chloro-6-fluoroanisole,1,3-bis- (2,6-diisopropylphenyl) imidazolium- (allyl) -palladium (II) -chloride(Sigma Aldrich Japan Co., Ltd.)0.029 g (0.05 mmol),Barium hydroxide octahydrate (manufactured by Wako Pure Chemical Industries, Ltd.)4.73 g (15 mmol) was added,Dissolved in 50 mL of isopropyl alcohol,The reaction was performed at 80 C. for 6 hours.After the reaction, the solid residue is removed by filtration,The solvent was distilled off under reduced pressure to obtain a crude product.Crude product is silica gel column chromatograph(Eluent; hexane / ethyl acetate = 9/1)1.37 g (63%, white solid) was obtained.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-Chloro-6-fluoroanisole, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Mitsui Chemical Inc; Hanada, Shiori; Kinoshita, Shinsuke; Kawamura, Noromori; Muroto, Toshihiro; Tanaka, Kenichi; Ishii, Seiichi; Terao, Hiroshi; Saito, Yasunori; Hara, Retsu; Mizobuchi, Yusuke; (67 pag.)JP5769444; (2015); B2;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 13078-79-0, name is 2-(3-Chlorophenyl)ethanamine, belongs to chlorides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 13078-79-0, category: chlorides-buliding-blocks

GammaAlpha1 r2-(3-Chloro-phenyl)-ethyll-carbamic acid methyl ester At 0 C, methyl chloroformate (4.6 g, 48 mmol) was added drop wise to a solution of 2-(3- chloro-phenyl)-ethylamine (5.0 g, 32 mmol) and Et3N (6.4 g, 64 mmol) in DCM (100 mL). After the addition, the mixture was stirred at room temperature for 0.5 hours. The organic layer was washed with water (3 x 30 mL), IN HCl (20 mL) and brine (30 mL), dried over anhy. Na2S04, filtered and concentrated in vacuo. After vacuum drying, the title compound was obtained (6.49 g, 95%) as a white solid. MS: 214.1 (M+H)+.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-(3-Chlorophenyl)ethanamine, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; AEBI, Johannes; AMREIN, Kurt E.; CHEN, Junli; HORNSPERGER, Benoit; KUHN, Bernd; LIU, Yongfu; LI, Dongbo; MAERKI, Hans Peter; MARTIN, Rainer E.; MAYWEG, Alexander; TAN, Xuefei; WU, Jun; YU, Jianhua; (109 pag.)WO2016/55394; (2016); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Application of 445-14-7, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 445-14-7, name is 2-Amino-4-chlorobenzotrifluoride, This compound has unique chemical properties. The synthetic route is as follows.

To a solution of 5-chloro-2-(trifluoromethyl)aniline (6.0 g, 30.7 mmol) in acetic acid (16.1 mL, 281 mmol) at rt was added concentrated hydrochloric acid (32 mL, 1053 mmol). To the resulting suspension at 0 °C was added a solution of sodium nitrite (2.54 g, 36.8 mmol) in water (9.2 mL) over 10 min. The mixture was stirred at rt for 4 h before a solution of tin(II) chloride dihydrate (15.23 g, 67.5 mmol) in concentrated hydrochloric acid (32 mL, 1053 mmol) was added over 10 min. The mixture was stirred at rt for 1.5 h. The precipitating solid was collected by suction filtration, then dissolved in water (100 mL), basified with 6N NaOH solution to pH 9, and extracted with EtOAc (4 x 50 mL). The combined extract was dried over MgSO4 and concentrated to a crude solid. The crude was purified with a silica gel flash column, eluting with 0-5percent MeOH in DCM to afford (5-chloro-2-(trifluoromethyl)phenyl)hydrazine (5.35 g, 25.4 mmol, 83 percent yield) as an off- white solid. MS (ESI) m/z: 210.9/212.9 (M+H)+; 1H NMR (400 MHz, METHANOL-d4) delta 7.36-7.44 (m, 2H), 6.79 (br d, J=7.92 Hz, 1H).

The chemical industry reduces the impact on the environment during synthesis 2-Amino-4-chlorobenzotrifluoride. I believe this compound will play a more active role in future production and life.

Reference:
Patent; BRISTOL-MYERS SQUIBB COMPANY; JALAGAM, Prasada Rao; NAIR, Satheesh Kesavan; PANDA, Manoranjan; FENG, Jianxin; WANG, Wei; LIU, Chunjian; ELLSWORTH, Bruce A.; SARABU, Ramakanth; SWIDORSKI, Jacob; HARTZ, Richard, A.; XU, Li; YOON, David S.; BENO, Brett R.; REGUEIRO-REN, Alicia; (457 pag.)WO2019/67702; (2019); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 933190-51-3 as follows. Safety of 8-Bromo-6-chloroimidazo[1,2-b]pyridazine

A 100-mL single-neck round-bottomed flask equipped with a magnetic stirrer and a reflux condenser was charged with 104a (2.0 g, 4 mmol), 5-(4-methylpiperazin-1-yl)pyridin-2-amine (920 mg, 4.8 mmol), tris(dibenzylideneacetone)dipalladium(0) (366 mg, 0.4 mmol), XantPhos (688 mg, 1.2 mmol), Cs2CO3 (2.6 g, 8.0 mmol), and 1,4-dioxane (60 mL). After three cycles of vacuum/argon flush, the mixture was heated at reflux for 15 h. It was then cooled to room temperature and filtered. The filtrate was concentrated under reduced pressure and the resulting residue was purified by silica-gel column chromatography eluting with dichloromethane/methanol (20:1) to afford 104b as yellow solid (1.4 g, 70%). MS: [M+H]+344.

According to the analysis of related databases, 933190-51-3, the application of this compound in the production field has become more and more popular.

Reference:
Patent; GENENTECH, INC.; Crawford, James John; Ortwine, Daniel Fred; Young, Wendy B.; US2013/116262; (2013); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Electric Literature of 2533-69-9, A common heterocyclic compound, 2533-69-9, name is Methyl 2,2,2-trichloroacetimidate, molecular formula is C3H4Cl3NO, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a mixture of 2,3-diaminobenzonitrile (50.0 mg, 376 imol, 1.0 eq) in DCM (1 mL) was added methyl 2,2,2-trichloroethanimidate (86.1 mg, 488 imol, 1.3 eq), followed by the addition of TFA (107.0 mg, 939 imol, 2.5 eq). The mixture was stirred at 18C for 2 hours under N2 atmosphere. The mixture was diluted with 5 mL of DCM and filtered. The filtrate wasused directly into the next step without further purification. The 97.8 mg of cmde 2- (trichloromethyl)-1H-benzo[djimidazole-4-carbonitrile in 5 mL of DCM was obtained as a brown solution and used in the next step directly.

The synthetic route of 2533-69-9 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; AQUINNAH PHARMACEUTICALS, INC.; BURNETT, Duane, A.; VACCA, Joseph, P.; (310 pag.)WO2018/119395; (2018); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

These common heterocyclic compound, 1939-99-7, name is Phenylmethanesulfonyl chloride, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. name: Phenylmethanesulfonyl chloride

Preparation 7: N-(2-bromoethyl)(phenyl)methanesulfonamide K2C03 (8.7 g, 62 mmol) was added into a mixture of phenylmethanesulfonyl chloride (6 g, 31 mmol) and 2-bromoethanamine hydrobromide (6.4 g, 31 mmol) in DCM (100 mL) at 0C. And the resulting mixture was stirred at r.t. for 4 hours and left standing overnight. Upon the completion of reaction, water (100 mL) was added in and DCM phase was separated. The aqueous phase was extracted with DCM. The combined organic phase was dried over Na2S04, filetered and concentrated in vacuo to provide a crude which was separated with column chromatography (silica gel with 200 – 300 mesh, 0 to 50% of EtOAc in petroleum ether) to provide compound /V-(2-bromoethyl)(phenyl)methanesulfonamide (7.0 g, 80%) as a pale yellow solid. H NMR (300 MHz, CDC13) delta 7.40 (m, 5H), 4.58 (m, IH), 4.29 (s, 2H), 3.34-3.29 (m, 4H). LCMS (ESI), 300, 302 [M+Na]+, Br pattern found.

The synthetic route of Phenylmethanesulfonyl chloride has been constantly updated, and we look forward to future research findings.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; GENENTECH, INC.; FAUBER, Benjamin; LADDYWAHETTY, Tammy; RENE, Olivier; (105 pag.)WO2016/96936; (2016); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Related Products of 108-37-2, These common heterocyclic compound, 108-37-2, name is 1-Bromo-3-chlorobenzene, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a solution of diisopropylamine (76 mL, 0.4 mol) in anhydrous THF (664 niL) and n-hexane (220 mL) was added 2.5 M «-BuLi (160 mL, 0.4 mol) dropwise* at -78 0C over 1 h. The mixture was stirred for 1 h at -78 0C and a solution of 1 – bromo-3-chlorobenzene (76 g, 0.4 mol) in anhydrous THF (300 mL) was added dropwise at -78 0C. After stirring for an additional 1 h at the same temperature, a solution of iodine (101 g, 0.4 mol) in anhydrous THF (400 mL) was added dropwise at -78 0C. The temperature was raised from -78 0C to room temperature during 2 h. After stirring for 18 h at rt, the mixture was concentrated in vacuo to give the crude product (120 g) which was distilled under reduced pressure to give l -bromo-3- fluoro-2-iodobenzene (1 15 g, 91%). 1H NMR (400MHz, CDCl3): 7.12-7.18 (t, IH), 7.35-7.41 (dd, IH), 7.49-7.54 (dd, IH); MS (E/Z): 317 (M+H+)

The synthetic route of 108-37-2 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; VITAE PHARMACEUTICALS, INC.; WO2007/117560; (2007); A2;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Related Products of 102-49-8,Some common heterocyclic compound, 102-49-8, name is 3,4-Dichlorobenzylamine, molecular formula is C7H7Cl2N, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: To an oven-dried screw-capped reaction tube equipped with a magnetic stirring bar theketone (1 eq), amine (2.8 eq), 4-nitrophenyl azide (2 eq), acetic acid (10 molpercent) and 4 Amolecular sieves (50 mg) were added. The reaction mixture was dissolved in toluene(0.3M) and stirred at 100 °C for 18 hours. The crude reaction mixture was then directlypurified by column chromatography (silica gel) at first with dichloromethane (DCM) aseluent to remove all 4-nitroaniline formed during the reaction followed by using a mixtureof heptane and ethyl acetate as eluent to afford the corresponding 1,2,3-triazoles asyellow oil.

The synthetic route of 102-49-8 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Karypidou, Konstantina; Ribone, Sergio R.; Quevedo, Mario A.; Persoons, Leentje; Pannecouque, Christophe; Helsen, Christine; Claessens, Frank; Dehaen, Wim; Bioorganic and Medicinal Chemistry Letters; vol. 28; 21; (2018); p. 3472 – 3476;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics