Month: May 2021

Reference of 54730-35-7, The chemical industry reduces the impact on the environment during synthesis 54730-35-7, name is 3,5-Dichloro-4-methylaniline, I believe this compound will play a more active role in future production and life.

To a solution of HBr (40% in water, 3.4 mL) in water (3 mL) was added 3,5-dichloro-4-methylaniline (2.0 g, 11.4 mmol). The suspension was heated to dissolve as much of the solid as possible, then the mixture was cooled to 0 degrees C. and a solution of sodium nitrite (0.83 g, 12.0 mmol) in water (2 mL) was added dropwise (temperature was maintained <5 degrees C.). After 10 min., the diazonium salt mixture was poured into a mixture of CuBr (8.2 g, 57.0 mmol) in 40% aq. HBr (13 mL) at room temperature. The resulting mixture was heated at 50 degrees C. for 45 min., then cooled to room temperature. The mixture was diluted with water and extracted with dichloromethane (3¡Á). The combined organics were filtered through Celite and dried over sodium sulfate, then concentrated in vacuo to provide the product, 5-bromo-1,3-dichloro-2-methylbenzene, as an orange solid. 1H NMR (400 MHz, CDCl3) delta 2.40 (s, 3H), 7.43 (s, 2H). In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 3,5-Dichloro-4-methylaniline, other downstream synthetic routes, hurry up and to see. Reference:
Patent; Diaz, Caroline Jean; Haffner, Curt Dale; Speake, Jason Daniel; Zhang, Cunyu; Mills, Wendy Yoon; Spearing, Paul Kenneth; Cowan, David John; Green, Gary Martin; US2010/222345; (2010); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Related Products of 54773-19-2,Some common heterocyclic compound, 54773-19-2, name is 1,2-Dichloro-3-(trifluoromethyl)benzene, molecular formula is C7H3Cl2F3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

2,3-dichlorobenzotrifluoride 215 g (1.00 mol) of the compound of the formula (II), anhydrous potassium fluoride 140 g (2.41 mol), sulfolane 2000 mL,10 g of tetraphenylphosphonium bromide was introduced into the autoclave in batches, and the temperature was raised to 250-300 C for 20 hours under stirring. After cooling, the formed potassium chloride and excess potassium fluoride were removed by filtration.The filtrate is rectified, and a fraction of 112 C to 119 C is collected to obtain a compound of formula (III) 2,3-difluorobenzotrifluoride; The residue is further subjected to rectification to collect a fraction of 145 C – 151 C to obtain a by-product 2-fluoro-3-chlorobenzotrifluoride; the by-product can be recycled.The average yield of 2,3-difluorobenzotrifluoride, which is a continuous preparation of the compound of formula (III) after application, is 87.6%.

The synthetic route of 54773-19-2 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Nanjing Zheng Rong Pharmaceutical And Chemical Co., Ltd.; Chen Zhengwei; Xiao Tao; Zhu Jiahao; Yu Chuanzong; Dai Jianxin; (13 pag.)CN104693080; (2016); B;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Synthetic Route of 16429-44-0, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 16429-44-0, name is 5-Bromo-3-chlorobenzene-1,2-diamine, This compound has unique chemical properties. The synthetic route is as follows.

5-bromo-3-chloro-1 ,2-diaminobenzene (4.6 g; 20 mmol; 1 .0 eq.) was dissolved in EtOH (200 ml_) and then 2,3-dihydroxy-1 ,4-dioxane (2.5 g, 20 mmol; 1 .0 eq.) was added. The mixture was stirred for 4 h at RT and a second portion of 2,3-dihydroxy-1 ,4-dioxane (1 .3 g; 10 mmol; 0.5 eq.) was added. After stirring for 24 h at rt, RM was concentrated in a rotary evaporator and the residue was purified by FCC to provide 7-bromo-5- chloroquinoxaline (Intermediate 3) as a beige solid (4.7 g; yield 92 %; 98 % by UPLC).

The chemical industry reduces the impact on the environment during synthesis 5-Bromo-3-chlorobenzene-1,2-diamine. I believe this compound will play a more active role in future production and life.

Reference:
Patent; MERCK PATENT GMBH; BUCHSTALLER, Hans-Peter; (101 pag.)WO2018/87021; (2018); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 208186-78-1, name is 1,2-Dibromo-5-chloro-3-fluorobenzene, A new synthetic method of this compound is introduced below., Safety of 1,2-Dibromo-5-chloro-3-fluorobenzene

GammaAlpha1 2-Bromo-4-chloro-6-fluoro-benzaldehydeTo a solution of l,2-dibromo-5-chloro-3-fluoro-benzene (10 g, 34.68 mmol) in heptane (27 ml) was added THF (44 ml) and the mixture was cooled to -45 C. Then, iPrMgCl (38.14 ml, 38.14 mmol, 1M solution in THF) was added dropwise to the reaction mixture maintaining the temperature between -40 C to -45 C. The mixture was stirred for 30 minutes at -40 C before DMF (13.4 ml, 173.4 mmol) was added dropwise to the reaction mixture maintaining the temperature between -45 C to -20 C. After stirring for another 15 minutes at -20 C, it was poured into a mixture of 2N HC1 (20 ml) and ether (50 ml) at 0 C. The organic layer was separated and the aqueous layer was extracted two times with ether. The combined organic layers were dried with Na2S04 and evaporated in vacuo to obtain the title compound (7.8 g, 95%) as yellow solid.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; AEBI, Johannes; BINGGELI, Alfred; HERTEL, Cornelia; KONKAR, Anish Ashok; KUEHNE, Holger; KUHN, Bernd; MAERKI, Hans P.; WANG, Haiyan; WO2012/101011; (2012); A2;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Application of 320-51-4, These common heterocyclic compound, 320-51-4, name is 4-Chloro-3-(trifluoromethyl)aniline, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

EXAMPLE S 1-Chloro-4-fluoro-2-(trifluoromethyl)benzene 4-Chloro-3-(trifluoromethyl)benzenamine (19.5 g, 100 mmoles), water (40 ml) and c.hydrochloric acid (40 ml) were heated with stirring on a steam bath until a white solid formed. The mixture was cooled (ice-salt bath) and a solution of sodium nitrite (7 g, 101 mmoles) in water (15 ml) was added over 15 mins. After stirring for a further hour at 0, tetrafluoroboric acid (30 g of 40% aqueous solution) was added dropwise over 15 minutes. After one hour the solid was filtered off, washed with water (10 ml), methanol (30 ml) and ether (30 ml) and then dried in vacuo. The dry compound was heated at 140-180 until no more fumes were observed. The cooled residue was dissolved in ethyl acetate, washed with 5% aqueous sodium hydroxide, dried Na2 SO4) and the solvent was removed in vacuo. The residue was distilled in vacuo (12 mmHg, oven temperature 50-55) to give the sub-title compound as a colourless oil (7.5 g). M+ 200/198; nmr (CDCl3)delta7.8-7.2 (m).

The synthetic route of 320-51-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Fisons plc; US4607041; (1986); A;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 59767-13-4, name is Setastine HCl, A new synthetic method of this compound is introduced below., Recommanded Product: 59767-13-4

1. The L-setastine hydrochloride can be synthesized by the SFC method. The Daicel chiral column setastine hydrochloride racemic (provided by Anhui Kelong medicine research institute) is used for chiral isomer separation by the Daicel preparation equipment, and its corresponding component is collected, so that pure optical isomers can be obtained by rotary evaporators. Column model for Daicel preparation equipment is CHIRALPAK AY-H (5 cm I.D.¡Á25 cm L.), and the mobile phase is CO2/EtOH/DEA=85/15/0.1 (v/v), and the flow rate is 100 g/min. The yield for the synthesis method is 40%, which means that 0.5 gram of L-setastine hydrochloride is obtained by adding 0.2 g of setastine hydrochloride racemic. The ee value is 98%, and [a]D20=-7.4 (c1.00, CH30H). NMR results were as follows: [0050] (1H)-NMR (DMSO-d6, delta (ppm)): 1.56-1.65 (4H), 1.82-1.87 (4H), 1.87 (3H), 3.17-3.37 (4H), 3.32 (2H), 3.60 (2H), 7.20-7.41 (9H). [0051] Meanwhile, 0.22 grams of D-setastine hydrochloride are obtained, which has the yield for generating D-setastine hydrochloride is 44%, and ee value thereof is 98.5%.

The synthetic route of 59767-13-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; ANHUI QINGYUN PHARMACEUTICAL; Huang, Qingyun; Huang, Qingguo; Lou, Meixian; US2014/296517; (2014); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Reference of 33050-36-1, These common heterocyclic compound, 33050-36-1, name is 3-Chloro-[1,2,4]triazolo[4,3-b]pyridazine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

EXAMPLE 101-(2-Morpholin-4-ylethyl)-3-[6-([1,2,4]triazolo[4,3-b]pyridazin-3-ylsulphanyl)-1,3-benzothiazol-2-yl]ureaa) The 1-(2-morpholin-4-ylethyl)-3-[6-([1,2,4]triazolo[4,3-b]pyridazin-3-ylsulphanyl)-1,3-benzothiazol-2-yl]urea can be prepared in the following way:277 mg of n-tributyl phosphine are added to a solution of 462 mg of 1-(2-morpholin-4-ylethyl)-3-(6-sulphanyl-1,3-benzothiazol-2-yl)urea in 5.5 cm3 of tetrahydrofuran. This mixture is stirred for 1 h at 20 C. with nitrogen sparging, before the addition of 176 mg of 3-chloro-1,2,4-triazolo[4,3-b]pyridazine, 166 mg of potassium tert-butoxide, 12 mg of tetraphenyldiphosphoxane and 11 cm3 of toluene and stirring for 30 min at 20 C. with nitrogen sparging. 10 mg of tris(1,5-diphenylpenta-1,4-dien-3-one)dipalladium(0) are then added to the resulting mixture and the subsequent mixture is brought to reflux for 17 h. The solvent is concentrated under reduced pressure and the residue is then taken up in water and 0.1N hydrochloric acid HCl. The mixture obtained is then extracted with a 90/10 mixture of ethyl acetate/methanol. 632 mg of a yellow oil are obtained, and chromatographed on Biotage Quad 12/25 (KP-SIL, 60 A; 32-63 muM), elution being carried out with a gradient of dichloromethane then dichloromethane/methanol: 99/1, 98/2, 97/3, 96/4, 95/6, 92/8, 90/10, 80/20. 75 mg of 1-(2-morpholin-4-ylethyl)-3-[6-([1,2,4]triazolo[4,3-b]pyridazin-3-ylsulphanyl)-1,3-benzothiazol-2-yl]urea are thus obtained in the form of a beige powder, the characteristics of which are as follows:MELTING POINT: 252 C. (Koefler block)NMR SPECTRUM 1H NMR (400 MHz, d6-DMSO) deltappm: 2.36-2.45 (m, 6H) 3.24-3.36 (m, 2H) 3.55-3.63 (m, 1H)6.78 (br. s., 0H) 7.38-7.48 (m, 0H) 7.57 (d, J=8.5 Hz, 0H) 8.04 (d, J=1.5 Hz, 0H) 8.43 (dd, J=9.5,1.5 Hz, 0H) 8.70 (dd, J=4.5, 1.5 Hz, 0H) 10.85-10.95 (m, 0H)MASS SPECTRUM: UPLC-MS-DAD-ELSD: 457(+)=(M+H)(+).

Statistics shows that 3-Chloro-[1,2,4]triazolo[4,3-b]pyridazine is playing an increasingly important role. we look forward to future research findings about 33050-36-1.

Reference:
Patent; sanofi-aventis; US2010/298315; (2010); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

102170-53-6, name is 4-Bromo-5-chloro-2-methoxyaniline, belongs to chlorides-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. category: chlorides-buliding-blocks

To each of 2 ice/water cooled flasks, containing 4-bromo-5-chloro-2-methoxyaniline (120 g, 507.42 mmol) in DCM (1000 mL) was added boron tribromide (382 g, 1522.26 mmol). After addition, the mixture was warmed to room temperature and stirred for 2 h. The reactionmixtures were poured into ice/water (2L), basified with solid sodium bicarbonate to pH 7 and extracted with ethyl acetate (l000mL x 6). The combined organics were dried over sodium sulphate and the solvent removed to give 2-amino-5-bromo-4-chlorophenol as a brown solid (220 g).LCMS: Rt 1.35 mi MH 222/224.

The synthetic route of 102170-53-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; GLAXOSMITHKLINE INTELLECTUAL PROPERTY DEVELOPMENT LIMITED; BOUILLOT, Anne Marie Jeanne; DENIS, Alexis; LIDDLE, John; MIRGUET, Olivier; WALKER, Ann, Louise; (64 pag.)WO2016/188827; (2016); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Some common heterocyclic compound, 1298031-94-3, name is 8-Bromo-6-chloro-2-methylimidazo[1,2-b]pyridazine, molecular formula is C7H5BrClN3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Application In Synthesis of 8-Bromo-6-chloro-2-methylimidazo[1,2-b]pyridazine

8-Bromo-6-chloro-2-methylimidazo[l,2-b]pyridazine (500 mg, 2.05 mmol, prepared according to example 43) was combined with vinylboronic acid pinacol ester (0.43 mL, 2.3 mmol), Pd(dppf)Cl2 (150 mg, 0.21 mmol) and K2C03 (850 mg, 6.15 mmol) in 1,4-dioxane (10 mL) and H20 (2 mL). The mixture was stirred at 90 C for 2 h under N2. The mixture was partitioned between EtOAc and H20. The organic layer was washed with brine, dried over Na2S04, filtered and concentrated. The residue was chromatographed on silica gel, eluting with 10-20% EtOAc in petroleum ether to yield 6-chloro-2-methyl-8-(prop- l-en-2-yl)imidazo[l,2- b]pyridazine (300 mg, 77%). MS m/z 208.0, 210.0 [M+H]+.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 1298031-94-3, its application will become more common.

Reference:
Patent; PTC THERAPEUTICS, INC.; WOLL, Matthew, G.; AMEDZO, Lukiana; BABU, Suresh; BARRAZA, Scott, J.; BHATTACHARYYA, Anuradha; KARP, Gary, Mitchell; MAZZOTTI, Anthony, R.; NARASIMHAN, Jana; PATEL, Jigar; TURPOFF, Anthony; XU, Zhenrong; (251 pag.)WO2018/226622; (2018); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Application of 621-62-5, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 621-62-5 name is 2-Chloro-1,1-diethoxyethane, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

0.95 g (2.5 mmol) of 5-chloro-7-(1,2-dimethylpropylamino)-6-(3-methylthiophen-2-yl)pyrazolo-[1,5-alpha]pyrimidine-3-carboxamide was dissolved in 25 ml of ethanol, and 1.0 g (6.5 mmol) of chloroacetaldehyde diethyl acetal was added. The mixture was stirred for 3 hours at 120 C. and 15 bar in a microwave oven (200 W). The reaction mixture was then concentrated under reduced pressure, and the residue that remained was chromatographed on silica gel using a mixture of cyclohexane:ethyl acetate=1:1. This gave 0.3 g of [5-chloro-6-(3-methylthiophen-2-yl)-3-oxazol-2-yl-pyrazolo[1,5-alpha]pyrimidin-7-yl](1,2-dimethylpropyl)amine (logPs=4.3; content according to HPLC: 98%)

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 2-Chloro-1,1-diethoxyethane, and friends who are interested can also refer to it.

Reference:
Patent; Gebauer, Olaf; Gayer, Herbert; Heinemann, Ulrich; Herrmann, Stefan; Hillebrand, Stefan; Elbe, Hans-Ludwig; Ebbert, Ronald; Wachendorff-Neumann, Ulrike; Dahmen, Peter; Kuck, Karl-Heinz; US2005/187224; (2005); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics