Month: May 2021

Application of 179897-90-6, A common heterocyclic compound, 179897-90-6, name is 1,3-Dibromo-2-chloro-5-fluorobenzene, molecular formula is C6H2Br2ClF, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

DMF (dimethylformaldehyde)To a solution of 1,3-dibromo-2-chloro-5-fluorobenzene (23.0 g, 79.8 mmol)And di-tert-butylphenylamine (24.3 g, 144 mmol)And cesium carbonate (84.4 g, 239 mmol) were charged, and the mixture was heated to 140 C and reacted for 40 hours.After cooling to room temperature, the mixture was extracted with EA, dried over anhydrous magnesium sulfate, filtered, and concentrated under reduced pressure.This was subjected to column chromatography with EA: Hx to obtain 12.0 g (Yield = 34%) of [Intermediate 12-1].

The synthetic route of 179897-90-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; LG Chem, Ltd.; Gu Gi-dong; Yoon Jeong-min; Kim Gong-gyeom; Huh Nan-seul-a; Lee Gi-gon; Keum Su-jeong; (52 pag.)KR2018/112721; (2018); A;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Application of 54730-35-7, These common heterocyclic compound, 54730-35-7, name is 3,5-Dichloro-4-methylaniline, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Preparation 2; 5-bromo- 1 ,3-dichloro-2-methylbenzene; Suspend the 3,5-dichloro-4-methylaniline in 48% HBr (5 mL) and water (5 mL) and heat with a heat gun until the mixture is near the boiling point. Cool the slurry to room temperature and then cool to 00C with an ice/brine bath. Add a solution of sodium nitrite (109 mg, 1.58 mmol) in water (2 mL) dropwise. After the addition is complete, stir the reaction an additional 15 min in the cold bath. Add a solution of CuBr (1.08 g, 7.53 mmol) in 48% HBr (2 mL) and heat the rapidly stirring reaction to 500C for 1 hour. Cool the reaction to room temperature, dilute the reaction with ethyl acetate and discard the aqueous layer. Wash the organic layer with water and brine, dry with MgSO4, filter through celite and concentrate to an orange residue. Purify the residue by silica gel chromatography eluting with hexanes to afford 164 mg (45%) of the product as a yellow solid.

Statistics shows that 3,5-Dichloro-4-methylaniline is playing an increasingly important role. we look forward to future research findings about 54730-35-7.

Reference:
Patent; ELI LILLY AND COMPANY; WO2007/127763; (2007); A2;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Related Products of 179897-90-6, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 179897-90-6, name is 1,3-Dibromo-2-chloro-5-fluorobenzene, This compound has unique chemical properties. The synthetic route is as follows.

Step 1. Preparation of 3-bromo-2-chloro-5-fluoroaniline To a sealable glass tube was charged 1,3-dibromo-2-chloro-5-fluorobenzene (12.52 g, 43.4 mmol), benzophenone imine (8.26 g, 45.6 mmol), sodium tert-butoxide (6.26 g, 65.1 mmol), and toluene (100 mL). The resulting mixture was thoroughly sparged with Argon, followed by the addition of Pd2(dba)3 (0.398 g, 0.434 mmol) and (S)-BINAP (0.81 g, 1.3 mmol), and follow by another Argon sparge. The reaction tube was sealed and heated to 85 C. in an oil bath and maintained overnight. The reaction was allowed to cool to room temperature and quenched with water (20 mL). The resulting layers were partitioned and separated. The organic phase was concentrated and assayed to be a mixture of mono- and bis-aminated products (~4:1 by HPLC area at 220 nm). The residue was dissolved in THF (70 mL), treated with aqueous 3.0 M HCl (20 mL) at room temperature for 1 hour and basified with saturated aqueous Na2CO3 solution (40 mL). The reaction mixture was allowed to partition and the layers were separated. The organic portion was separated, washed with brine, concentrated and the resulting residue was purified by flash chromatography (SiO2, 0-15% EtOAc in heptane) and 3-bromo-2-chloro-5-fluoroaniline was obtained as a light yellow solid (6.82 g, 30.4 mmol): LCMS(m/z): not ionized (MH+), tR=0.95 minute; 1H NMR (CDCl3, 300 MHz) delta 4.32 (br s, 2H), 6.44 (dd, J=9.8, 2.8 Hz, 1H), 6.77 (dd, J=7.9, 2.6 Hz, 1H).

The chemical industry reduces the impact on the environment during synthesis 1,3-Dibromo-2-chloro-5-fluorobenzene. I believe this compound will play a more active role in future production and life.

Reference:
Patent; Costales, Abran Q.; Huang, Shenlin; Jin, Jeff (Xianming); Liu, Zuosheng; Pecchi, Sabina; Poon, Daniel; Tellew, John; US2011/52578; (2011); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 2162-98-3, name is 1,10-Dichlorodecane, This compound has unique chemical properties. The synthetic route is as follows., Quality Control of 1,10-Dichlorodecane

Reaction product of N,N-dimethylaminoethanol and 1 ,10-dichlorodecane (AE- DCD) [0089] N,N-dimethylaminoethanol (4.216 g, 0.047 mol) was added to a single neck round bottom flask. The flask was then fitted with a drying tube and stirred using a magnetic stirrer. 1,10-dichlorodecane (5 mL, 0.024 mol) was added slowly through a syringe to control the exothermic mixing. After completing the addition the reaction mixture was stirred under ambient conditions for 30 minutes. It was then immersed in a preheated oil bath maintained at 80 C. The contents of the flask solidified after heating for 4 h. The solid was washed with diethyl ether and dried in a vacuum oven. Yield: 6 g. 1H-NMR analysis indicated that the -CH3 group attached to the N atom shifted to 3.3 ppm after quaternization.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 2162-98-3.

Reference:
Patent; AGENCY FOR SCIENCE, TECHNOLOGY AND RESEARCH; ANBANANDAM, Parthiban; (53 pag.)WO2016/148649; (2016); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 18112-31-7, name is 3-Bromo-6-chloro-2-methylimidazo[1,2-b]pyridazine belongs to chlorides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below. category: chlorides-buliding-blocks

To a solution of 3-bromo-6-chloro-2-methylimidazo[1,2-b]pyridazine (865 mg, 5.16 mmol, 1.0 equiv) in acetonitrile (15 mL) was added boronic acid (5.16 mmol, 1.0 equiv), bis(triphenylphosphine)palladium(II)dichloride (0.516 mmol, 0.1 equiv), then sodium carbonate (1.0 M aqueous solution, 10 equiv). The reaction mixture was irradiated in the microwave at 150 C. for 10 min. Purification by column chromatography gave of the product.

The synthetic route of 18112-31-7 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Califia Bio, Inc.; GOODFELLOW, VAL S.; NGUYEN, THONG X.; RAVULA, SATHEESH B.; GELBARD, HARRIS A.; US2014/256733; (2014); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Electric Literature of 1009102-44-6, A common heterocyclic compound, 1009102-44-6, name is 1-(4-Chlorophenyl)cyclopropanamine hydrochloride, molecular formula is C9H11Cl2N, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

l-(4-chlorophenyl)cyclopropanamine hydrochloride (25 mg, 0.123 mmol) was added to a stirring solution of HATU (59 mg, 0.154 mmol), DIEA (54 mu, 0.308 mmol), and 3-(2-(4-fluorophenyl)-3- (methylcarbamoyl)benzofuran-5-yl)benzoic acid (40 mg, 0.103 mmol) in DMF (1 mL) at rt. It was allowed to stir for 1 hour. The mixture was diluted with EtOAc and washed with sat NaHC03, and sat NaCl. The organic phase was dried over Na2S04, filtered and concentrated and was purified by preparative reverse phase HPLC on a C18 column using a suitably buffered H20/CH3CN gradient, and concentrated to give the titled compound (8 mg, 14%). 1H NMR (500 MHz, DMSO-d6) d ppm 9.37 (1 H, s), 8.46 – 8.55 (1 H, m), 8.22 (1 H, s), 7.95 – 8.05 (2 H, m), 7.86 – 7.95 (3 H, m), 7.74 – 7.83 (2 H, m), 7.59 (1 H, t, J=7.63 Hz), 7.38 – 7.44 (2 H, m), 7.30 – 7.36 (2 H, m), 7.20 – 7.28 (2 H, m), 2.86 (3 H, d, J=4.58 Hz), 1.26 – 1.36 (4 H, m). LC-MS retention time: 1.92 min; m/z (MH+): 539. LC data was recorded on a Shimadzu LC-10AS liquid chromatograph equipped with a Phenomenex-Luna lOu CI 8 3.0x50mm column using a SPD-10AV UV-Vis detector at a detector wave length of 220nM. The elution conditions employed a flow rate of 5 ml/min , a gradient of 100% solvent A / 0% solvent B to 0% solvent A / 100% solvent B, a gradient time of 2 min, a hold time of 1 min, and an analysis time of 3 min where solvent A was 10% MeOH / 90% H20 / 0.1% trifluoroacetic acid and solvent B was 10% H20 / 90% MeOH / 0.1% trifluoroacetic acid. MS data was determined using a Micromass Platform for LC in electrospray mode. Additional HPLC method: Solvent A = 5% CH3CN/95%H2O/0.1% TFA, Solvent B = 95% CH3CN/5% H2O/0.1% TFA, Start %B = 10, Final %B = 100, Gradient time = 15 min, Stop time = 18 min, Flow Rate = 1 ml/min. Column: Waters Sunfire C-18, 4.6 x 150 mm, 3.5 mm, Rt = 14.56 min, purity = 99%; Column: Waters Xbridge Phenyl column 4.6 x 150 mm, 3.5 mm, Rt = 13.20 min, purity = 97%.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; BRISTOL-MYERS SQUIBB COMPANY; YEUNG, Kap-Sun; PARCELLA, Kyle, E.; BENDER, John, A.; BENO, Brett, R.; GRANT-YOUNG, Katharine, A.; HAN, Ying; HEWAWASAM, Piyasena; KADOW, John, F.; NICKEL, Andrew; WO2011/112191; (2011); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Electric Literature of 2770-01-6, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 2770-01-6, name is 4-Chloro-1H-imidazo[4,5-c]pyridine belongs to chlorides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

The chiral cyclopentenyl moiety 5 (below) was prepared from D-ribose in 8 steps following a previously reported synthetic method via a chiral induction, a regioselective protection of hydroxy group and ring-closing metathesis with 0.1 mole% of the 2nd generation Grubbs catalyst as key steps. 10; The other key intermediate 7 was synthesized according to the previously reported procedure11 from commercially available 4-amino-2-chloropyridine (6) in 4 steps (overall 54% yield) as shown in Scheme 1. Mitsunobu reaction of 7 with 5 provided a mixture of the N9- and N7-regioisomers (8:9 = 2:1) in 94% yield. The separation of the desired product (8) from the reaction mixture was difficult by silica gel column [isolated yields: 20% (8) and 20% (9), respectively]. The ratio of the two isomers was determined by 1H-NMR, and their configuration was identified by Nuclear Overhouser Effect (ID-NOE), which indicated the interaction between the C1 ‘-H and the aromatic C3-H of compound 8, whereas the same effect was not present in compound 9.

The synthetic route of 4-Chloro-1H-imidazo[4,5-c]pyridine has been constantly updated, and we look forward to future research findings.

Reference:
Patent; UNIVERSITY OF GEORGIA RESEARCH FOUNDATION, INC.; WO2007/47793; (2007); A2;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 17601-75-1, name is 2,4-Dichloro-5-methylaniline, A new synthetic method of this compound is introduced below., Quality Control of 2,4-Dichloro-5-methylaniline

Comparative Example 2-11-(2′,2′,2′-Trichloroethyl)-2,4-dichloro-5-methylbenzene; At room temperature, 7.04 g [0.04 mol] of 2,4-dichloro-5-methylaniline are introduced into 28 ml of conc. hydrochloric acid, the mixture is cooled to -5 to 0 C. and a solution, cooled to 0 C., of 3.31 g [0.048 mol] of NaNO2 in 80 ml of water is added dropwise within 60 minutes. Subsequently, the mixture is stirred at -5 to 0 C. for 15 minutes. Subsequently, 3.23 g [0.024 mol] of copper(II) chloride are added. To this mixture is added dropwise, at 0 C. within 30 minutes, a solution of 38.8 g [0.4 mol=10 molar equivalents] of vinylidene chloride in 130 ml of acetone. The mixture is allowed to come to room temperature with good stirring and left to react for another 3 hours. The reaction mixture is diluted with 100 ml of water and extracted twice with 70 ml each time of MTBE. The combined organic phases are washed with 30 ml of water, dried over sodium sulphate and concentrated under reduced pressure. This gives 12.3 g of oil which, according to GC-MS, contains 64.05 area % of 1-(2′,2′,2′-trichloroethyl)-2,4-dichloro-5-methylbenzene. This corresponds to a yield of 67.4% of theory.The GC-MS shows, as by-products, 5.7 area % of Sandmeyer product and 23.8 area % of 1,5-dichloro-2-methyl-4-(2′,2′,4′,4′,4′-pentachlorobutyl)benzene.

The synthetic route of 17601-75-1 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Bayer CropScience AG; US2010/234651; (2010); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Electric Literature of 67330-62-5, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 67330-62-5 as follows.

Example 4Synthesis of M-MIPACDEAIn a 5 litre flanged reaction vessel were placed a mixture of 137 ml of sulphuric acid, 580 ml water and 313 ml propan-2-ol. To this were added 250 grams of 3-chloro-2,6-diethylaniline and 203 grams of 2-methyl-6-isopropylaniline. The flask was provided with a stirrer, dropping funnel and condenser and the temperature was raised to 60 C.Formalin solution (35% w/w), 120 ml, was added over a period of 1 hour and heating was subsequently continued for 5 hours. The vessel contents were cooled and neutralised with ammonia solution.The product was extracted into ethyl acetate, washed with water, dried over sodium sulphate, filtered and rotary evaporated to give 467 grams of an amber liquid.Analysis by HPLC showed that the desired hybrid methylene bis-aniline M-MIPACDEA is present at 63% of the total, together with 15% of M-MIPA and 21% of M-CDEA.The liquid showed no sign of crystallisation over 3 months.

According to the analysis of related databases, 67330-62-5, the application of this compound in the production field has become more and more popular.

Reference:
Patent; HEXCEL COMPOSITES LIMITED; US2012/316262; (2012); A1;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics

Synthetic Route of 179897-90-6, A common heterocyclic compound, 179897-90-6, name is 1,3-Dibromo-2-chloro-5-fluorobenzene, molecular formula is C6H2Br2ClF, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

EXAMPLE 185 6-(3-Bromo-2-chloro-5-fluorophenyl)-1,2-dihydro-2,2,4-trimethylquinoline (Compound 285, structure 4 of Scheme II, where R1 =3-bromo-2-chloro-5-fluorophenyl) This compound was prepared according to General Method 2 (EXAMPLE 9) from Compound 9 (143.3 mg, 0.45 mmol) and 1-chloro-2,6-dibromo-4-fluorobenzene (129.9 mg, 0.45 mmol). The crude material was purified by flash column chromatography (50 mL silica, hexane) followed by reverse phase preparatory TLC (1000 mL ODS, 80% methanol/water) to afford 4.3 mg (3%) of Compound 285. Data for Compound 285: 1 H NMR (400 MHz, acetone-d6) 7.50 (dd, J=7.8, 3.0, 1H), 7.19 (dd, J=9.2, 3.0, 1H), 7.10 (d, J=2.0, 1H), 7.03 (dd, J=8.1, 2.0, 1H), 6.55 (d, J=8.3, 1H), 5.61 (s, 1H), 5.37 (s, 1H), 1.97 (s, 3H), 1.29 (s, 6H).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Ligand Pharmaceuticals Incorporated; US5688810; (1997); A;; ; Patent; Ligand Pharmaceuticals Incorporated; US5696127; (1997); A;,
Chloride – Wikipedia,
Chlorides – an overview | ScienceDirect Topics