Month: April 2021

One of the major reasons for studying chemical kinetics is to use measurements of the macroscopic properties of a system, such as the rate of change in the concentration of reactants or products with time. 50-84-0, Name is 2,4-Dichlorobenzoic acid, formurla is C7H4Cl2O2. In a document, author is Alhama, I, introducing its new discovery. Recommanded Product: 2,4-Dichlorobenzoic acid.

Proposal and verification of a new isotherm based on exponential-asymptotic dependence between free and bound chlorides in reinforced concrete

The so-called isotherms represent the relationship between free and bound chlorides in the process of penetration of chloride ions in concrete structures. A new isotherm of the exponential-asymptotic type that corrects and improves the behavior of the classical four dependences in low porosity concrete subjected to high concentrations of chloride is present in this paper. The proposed isotherm has two advantages over the classic ones, in particular compared to that of Langmuir-Freundlich considered the most accurate. On the one hand, it contains only two coefficients so it is easy to adjust to the pairs (free chloride, bound chloride) obtained in experimental tests, on the other, it corrects the inflection contained in the initial stretch of Langmuir-Freundlich dependence. Data coming from experimental tests extracted from the scientific literature are used to fit the coefficients of all isotherms and long-term numerical simulations are performed to reproduce the concentration profiles and verify the consistent and precise behavior of the proposed isotherm to predict the first stage of the service life of the reinforced concrete structures. (C) 2020 Elsevier Ltd. All rights reserved.

If you are hungry for even more, make sure to check my other article about 50-84-0, Recommanded Product: 2,4-Dichlorobenzoic acid.

Related Products of 6574-98-7, Enzymes are biological catalysts that produce large increases in reaction rates and tend to be specific for certain reactants and products. 6574-98-7, Name is 2,4-Dichlorobenzonitrile, SMILES is C1=CC(=CC(=C1C#N)Cl)Cl, belongs to chlorides-buliding-blocks compound. In a article, author is Yang, Sudong, introduce new discover of the category.

Facile and sustainable fabrication of high-performance cellulose sponge from cotton for oil-in-water emulsion separation

Given complexity and diversity of oily wastewater, developing highly efficient separation materials through green and facile strategy are urgently needed. Herein, a smart strategy is demonstrated to transform raw cotton into uniform cellulose sponge for separation oil-in-water emulsion. The raw cotton is directly treated in zinc chloride aqueous solutions through a controllable dissolution process. After regeneration without any further chemical modification and freeze drying, the evolved cellulose sponge, which is composed of partially dissolved cotton fiber and exfoliated regenerated cellulose, exhibits interesting three-dimensional (3D) interconnected hierarchical porous network structure and stable wettability of superoleophobicity (theta(oil) > 150 degrees) under water. Cellulose sponge has excellent underwater superoleophobicity and antifouling property due to the natural hydrophilicity of cellulose. Based on the beneficial 3D hierarchical structure and superwettability, the cellulose sponge can separate highly emulsified oil-in-water emulsions with efficiency up to 99.2% solely under the driving of gravity. Our strategy provides a generic way to convert cellulose-based materials into cellulose porous materials with excellent permeability, separation efficiency, antifouling, and reusability property for oil/water emulsions separation. This economical, environmentally friendly and functional cellulose sponge not only allows natural cotton resources to be used rationally with high value-added, but also effectively solves the problems of oily wastewater.Y

Related Products of 6574-98-7, One of the oldest and most widely used commercial enzyme inhibitors is aspirin, which selectively inhibits one of the enzymes involved in the synthesis of molecules that trigger inflammation. you can also check out more blogs about 6574-98-7.

Chemistry is the experimental and theoretical study of materials on their properties at both the macroscopic and microscopic levels. 81927-55-1, Name is Benzyl 2,2,2-trichloroacetimidate, molecular formula is C9H8Cl3NO. In an article, author is Ding, Yunji,once mentioned of 81927-55-1, Product Details of 81927-55-1.

Highly porous ceramics production using slags from smelting of spent automotive catalysts

Spent automotive catalysts are the most crucial secondary resources of platinum group metals (PGMs). Currently, the iron-capturing method is one of the most promising technologies for PGMs recycling. The residual smelting slags contain large amounts of CaO, Al2O3, MgO, SiO2, Na2O, and the trace of heavy metals (e.g. Cr, Pb, Ni), which are classified as solid waste or even hazardous waste, which are typically treated by landfills, and poses severe threats to the environment. In this paper, based on the specific chemical composition of smelting slags, ceramic foams with high porosity, low density and good thermal insulation were fabricated by particle-stabilized foams method, where long-chain surfactant hexadecyltrimethylammonium chloride served as the hydrophobic modifier of slag particles and colloidal silica as binding agent. Herein, the influence of sintering temperature and the amount of smelting slag on the physical properties of obtained porous ceramics were systematically investigated. The results showed that porous ceramics with a bulk density of 0.40-0.64 g/cm(3), open porosity of 74.7-83.4%, thermal conductivity of 0.10-0.21 W/(m.K) and compressive strength of 1.04-4.01 MPa can be obtained with the mass ratio of slag: colloidal silica of 2:1, 3:1 and 4:1 sintered at 1000 degrees C for 2 h. The porous ceramics with these unique properties are promising to be applied as thermal insulation materials. This convenient, facile and versatile approach is also expected to fabricate porous ceramics by using other solid waste as raw materials.

Interested yet? Keep reading other articles of 81927-55-1, you can contact me at any time and look forward to more communication. Product Details of 81927-55-1.

Chemistry is the experimental science by definition. We want to make observations to prove hypothesis. For this purpose, we perform experiments in the lab. , Formula: C4H8BrCl, 6940-78-9, Name is 1-Bromo-4-chlorobutane, molecular formula is C4H8BrCl, belongs to chlorides-buliding-blocks compound. In a document, author is Latif, Azka, introduce the new discover.

First Reported Case of Hyperchloremic Non-Anion Gap Metabolic Acidosis in a Patient Undergoing Continuous Bladder Irrigation for Hemorrhagic Cystitis

Radiation cystitis can present as gross hematuria and occurs secondary to irritation of the bladder urothelium. Continuous bladder irrigation (CBI) is commonly used for the treatment of hemorrhagic cystitis for evacuation of blood clots and to maintain catheter drainage. Most commonly, CBI is performed using 0.9% sodium chloride. We report a 77-year-old female who developed hyperchloremic non-anion gap metabolic acidosis (H-NAGMA) and pulmonary edema secondary to absorption of 0.9% normal saline (NS) from CBI. In such cases, ringer lactate with low concentration (109 mEq) of chloride as compared to NS (154 mEq) can prove to be a suitable alternative.

A reaction mechanism is the microscopic path by which reactants are transformed into products. Each step is an elementary reaction. In my other articles, you can also check out more blogs about 6940-78-9. Formula: C4H8BrCl.

Chemistry, like all the natural sciences, begins with the direct observation of nature¡ª in this case, of matter.870-24-6, Name is 2-Chloroethanamine hydrochloride, SMILES is ClCCN.[H]Cl, belongs to chlorides-buliding-blocks compound. In a document, author is Ibrahim, Mohammed, introduce the new discover, SDS of cas: 870-24-6.

An overview of factors influencing the properties of alkali-activated binders

Alkali activated binders (AABs) are evolving as alternative to Portland cement. They are predominantly synthesized using aluminosilicate materials, such as fly ash, silica fume, metakaolin, etc. However, the synthesis of these binders is very sensitive to several factors. These include the source, constituents and fineness of the precursor materials, type and combination of alkaline activators, quantity of free-water, and type and duration of curing. Though the synthesis and properties of AABs were studied in the past, there is an apprehension towards using this technology by the construction industry due to practical difficulties. These include insufficient information and understanding of the mix design, lack of uniformity in the composition of precursor materials and its possible impact on the properties of these binders. In addition, there is lack of data on the long-term performance of AABs under aggressive exposure conditions, particularly chloride-bearing environment. The findings of research studies conducted so far indicate that the mechanical characteristics of AABs are either equivalent to or better than those of Portland cement concrete. However, some aspects related to the long-term durability of these binders are yet to be fully understood, including fire-resistance. Accordingly, this paper is aimed to present an overview of parameters that affect the properties of AABs and to elaborate the polymerization mechanisms of commonly used precursor materials. Moreover, the performance of AABs exposed to aggressive environmental conditions are presented. In the light of available literature, the review indicates that future research in this area has to be focused on the development of standard specifications and evaluation procedures for the precursor materials and combinations of alkaline activators for a particular source material. In addition, it is realized that the long-term study on the durability aspects of these binders, particularly exposed to chloride-bearing environment requires considerable attention. (C) 2020 Elsevier Ltd. All rights reserved.

The proportionality constant is the rate constant for the particular unimolecular reaction. the reaction rate is directly proportional to the concentration of the reactant. I hope my blog about 870-24-6 is helpful to your research. SDS of cas: 870-24-6.

Chemistry can be defined as the study of matter and the changes it undergoes. You¡¯ll sometimes hear it called the central science because it is the connection between physics and all the other sciences, starting with biology. 627-00-9, Name is 4-Chlorobutanoic acid, molecular formula is , belongs to chlorides-buliding-blocks compound. In a document, author is Abancens, Maria, Formula: C4H7ClO2.

Sexual Dimorphism in Colon Cancer

A higher incidence of colorectal cancer (CRC) is found in males compared to females. Young women (18-44 years) with CRC have a better survival outcome compared to men of the same age or compared to older women (over 50 years), indicating a global incidence of sexual dimorphism in CRC rates and survival. This suggests a protective role for the sex steroid hormone estrogen in CRC development. Key proliferative pathways in CRC tumorigenesis exhibit sexual dimorphism, which confer better survival in females through estrogen regulated genes and cell signaling. Estrogen regulates the activity of a class of Kv channels (KCNQ1:KCNE3), which control fundamental ion transport functions of the colon and epithelial mesenchymal transition through bi-directional interactions with the Wnt/beta-catenin signalling pathway. Estrogen also modulates CRC proliferative responses in hypoxia via the novel membrane estrogen receptor GPER and HIF1A and VEGF signaling. Here we critically review recent clinical and molecular insights into sexual dimorphism of CRC biology modulated by the tumor microenvironment, estrogen, Wnt/beta-catenin signalling, ion channels, and X-linked genes.

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data. If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about 627-00-9, in my other articles. Formula: C4H7ClO2.

One of the major reasons for studying chemical kinetics is to use measurements of the macroscopic properties of a system, such as the rate of change in the concentration of reactants or products with time. 126764-17-8, Name is 1-Chloro-6,6-dimethylhept-2-en-4-yne, formurla is C9H13Cl. In a document, author is Koehne, Ingo, introducing its new discovery. Quality Control of 1-Chloro-6,6-dimethylhept-2-en-4-yne.

Functionalised phosphonate ester supported lanthanide (Ln = La, Nd, Dy, Er) complexes

A series of phosphonate ester supported lanthanide complexes bearing functionalities for subsequent immobilisation on semiconductor surfaces are prepared. Six phosphonate ester ligands (L1-L6) with varying aromatic residues are synthesised. Subsequent complexation with lanthanide chloride or -nitrate precursors (Ln = La, Nd, Dy, Er) affords the corresponding mono- or dimeric lanthanide model complexes [LnX(3)(L1-L3 or L5-L6)(3)](n) (X = NO3, Cl; n = 1 (Nd, Dy, Er), 2 (La, Nd)) or [LnCl(2)Br(L4-Br)(2)(L4-Cl)](n) (n = 1 (Nd, Dy, Er), 2 (La, Nd)) (1-32). All compounds are thoroughly characterised, and their luminescence properties are investigated in the visible and NIR spectral regions, where applicable.

If you are hungry for even more, make sure to check my other article about 126764-17-8, Quality Control of 1-Chloro-6,6-dimethylhept-2-en-4-yne.

Application of 140-53-4, Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 140-53-4, Name is (4-Chlorophenyl)acetonitrile, SMILES is ClC1=CC=C(CC#N)C=C1, belongs to chlorides-buliding-blocks compound. In a article, author is Algadi, Hana’a Hezam, introduce new discover of the category.

Toluidine blue versus frozen section for assessment of mucosal tumor margins in oral squamous cell carcinoma

BackgroundWhen the resected specimen is sent for intraoperative margin assessment, all margins are grossly checked, and selected margins undergo a frozen section (FS) examination. Therefore, there is a possibility of sampling error. This study evaluated the effectiveness of using toluidine blue (TB) as an intraoperative triage screening tool to detect positive mucosal margins of the resected specimens of oral squamous cell carcinoma (OSCC) and serve as a guide for FS sampling.MethodsSurgical samples of 30 consecutive patients with biopsy-proven OSCC were included in the study. A total of 140 mucosal margins were analyzed intraoperatively by TB and FS, the results were compared with the final histopathology.ResultsOf the 140 examined mucosal tumor margins, 14 stained positives with TB, six were true-positives, eight were false-positives, and there were no false-negatives, as confirmed by final histopathology of the same margins. The diagnostic performance measures were sensitivity 100.0%; specificity 94.0%; positive predictive value (PPV) 42.9%; negative predictive value (NPV) 100.0%; and accuracy 94.3% (95% CI: 89.0-97.5%). For FS, there were three true-positives, three false-negatives, and no false-positives. The diagnostic performance measures were sensitivity 50.0%; specificity 100.0%; PPV 100.0%; NPV 97.8%; and accuracy 97.9% (95% CI: 93.9-99.6%).ConclusionTB is less specific but more sensitive than FS for detecting positive mucosal margins of resected OSCC. Screening the tumor mucosal margins with TB before FS sampling may help identify more tumor-bearing margins.Trial registrationThis trial was registered at ClinicalTrials.gov. Registration number: NCT03554967. Registration date: June 13, 2018.

Application of 140-53-4, One of the oldest and most widely used commercial enzyme inhibitors is aspirin, which selectively inhibits one of the enzymes involved in the synthesis of molecules that trigger inflammation. you can also check out more blogs about 140-53-4.

The reaction rate of a catalyzed reaction is faster than the reaction rate of the uncatalyzed reaction at the same temperature. Formula: C9H13Cl, 126764-17-8, Name is 1-Chloro-6,6-dimethylhept-2-en-4-yne, SMILES is CC(C)(C#CC=CCCl)C, in an article , author is Du, Xiaojia, once mentioned of 126764-17-8.

Transparent and Stretchable Graphene Electrode by Intercalation Dopineg for Epidermal Electrophysiology

Epidermal electronics is regarded as the next-generation technology, and graphene is a promising electrode, which is a key building block of such devices. However, graphene has a tendency to crack at small strains with a rapidly increased resistance upon stretching. Here, to enable graphene applicable in epidermal electronics, we designed a novel graphene structure that is molybdenum chloride (MoCl5)-intercalated few-layer graphene (Mo-FLG) fabricated in a confined environment. In the case of bilayer graphene (BLG), MoCl5-intercalated bilayer graphene (Mo-BLG) exhibited a low sheet resistance of 40 Omega/square (sq) at a transmittance of 80%. Due to the self-barrier doping effect, the sheet resistance increased to only 60 Omega/sq after exposing to the atmosphere over 1 month. Transferred onto elastomer substrates, Mo-BLG can work as an electrode up to 80% strain and maintain a high conductivity that is durable over 2000 cycles at 30% strain. This mechano-electrostability is attributed to the special intercalated structure where the intercalated dopants act as lubricants to weaken the layer-layer interaction and allow a certain degree of sliding, as well as electrical crack-connectors to bridge the cracked domains at a high strain. Mo-BLG can be applied as epidermal electrodes to monitor electrophysiological signals such as electrocardiogram (ECG), electrooculogram (EOG), electroencephalography (EEG), and surface electromyogram (sEMG) with high signal-to-noise ratios (SNRs) comparable to commercial Ag/AgCl electrode. This is the first demonstration of epidermal electrodes based on intercalation-doped graphene applied in health monitoring, shedding light on the future development of graphene-based epidermal electronics.

But sometimes, even after several years of basic chemistry education, it is not easy to form a clear picture on how they govern reactivity! 126764-17-8, you can contact me at any time and look forward to more communication. Formula: C9H13Cl.

Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. In an article, author is Yang, Hong-Qi, once mentioned the application of 112-26-5, Name is 1,2-Bis(2-chloroethoxy)ethane, molecular formula is C6H12Cl2O2, molecular weight is 187.06, MDL number is MFCD00000976, category is chlorides-buliding-blocks. Now introduce a scientific discovery about this category, Formula: C6H12Cl2O2.

Effects of mechanical stress and cathodic protection on the performance of a marine organic coating on mild steel

The separate and interactive effects of mechanical stress and cathodic protection on degradation behaviour of a marine epoxy-based organic coating on Q235 steel in 3.5% NaCl solution were investigated by employing electrochemical impedance spectroscopy technique. Results revealed that both tension stress (e.g., 120 and 200 MPa) and cathodic protection (e.g.,-0.8,-1.0 and-1.2 V with respect to a saturated silver/silver chloride electrode) could greatly deteriorate coating protective performance, including barrier properties, water uptake and diffusion as well as delaminated area, and meanwhile their harmful impacts could become more pronounced with the prolongation of immersion time. The interactive effect of the two factors on coating degradation was shown to be associated with their respective contribution. In addition, the degradation rate for the coating at the potentials of-0.8 and-1.0 V depended largely on the main reaction rate of oxygen reduction and hydrogen evolution, and the predominant control procedure of the two reactions could be reversed by the critical tension stress of 120 MPa.

Do you like my blog? If you like, you can also browse other articles about this kind. Thanks for taking the time to read the blog about 112-26-5, Formula: C6H12Cl2O2.